9 or 10 Degree Wedge Ruler- 25"
#1
Does anyone know the dimensions to make a template out of cardboard for either or both of these rulers. The Spicy Spiral Table runner is awesome, but I can't afford the ruler along with the pattern to make it. Someone on this forum had mentioned the template out of cardboard and I thought that might be a viable option.
#3
I mentioned making templates out of posterboard for my Spicy Spiral Table Runner (I couldn't get the ruler locally at the time). I measured and drew a 10 degree angle on the posterboard and cut the templates from it. I used the pattern to decide how long to make each piece. Even though my template wasn't exactly what was called for in the pattern, it worked out fine. http://www.quiltingboard.com/t-68251-1.htm
You can see the difference in using a 10 degree angle vs. a 9 degree angle in the post from raptureready(the 2nd reply down in the same thread).
You can see the difference in using a 10 degree angle vs. a 9 degree angle in the post from raptureready(the 2nd reply down in the same thread).
#5
Senior Member
Join Date: Jul 2010
Location: Ramsgate. Kent England
Posts: 441
Originally Posted by magpie
The 10 degree ruler is 22.5 inches long, 1 inch wide at narrow end and 4 7/8 wide at bottom edge. these measurments include the 1/4 inch seam. hope this helps.
#9
Originally Posted by magpie
The 10 degree ruler is 22.5 inches long, 1 inch wide at narrow end and 4 7/8 wide at bottom edge. these measurments include the 1/4 inch seam. hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post