Brother PQ 1500s walking foot
#1
Senior Member
Thread Starter
Join Date: Jan 2014
Location: Southern Illinois
Posts: 303
Brother PQ 1500s walking foot
The walking foot that came with my PQ 1500s is a narrow toe and doesn't have a guide. I would really like to find an open toe one that has a quide or one that just has a guide. Does anyone with this machine know of one I could get. I contacted Brother and they don't have another walking foot that will fit this machine. I know that there are other brand feet that will fit this machine but I'm not familiar with them.
#3
I read on one forum, that the Janome high shank open toe even feed foot fits the PQ1500s. Don't take my word for it though. I wrote that down hoping to find one to try. It would be nice if more people chime in here because I would like a foot that leaves enough space to see where your sewing.
#4
Super Member
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
A "wide" walking foot wouldn't fit the feed dogs of your machine. YOu have a straight stitch machine with narrow feed dogs. The walking foot similarly has to have narrow matching feed or the WF wouldn't work as designed. So, no, you won't be able to get other WF to work properly on the machine other than what it was designed to handle.
#7
Senior Member
Thread Starter
Join Date: Jan 2014
Location: Southern Illinois
Posts: 303
Thanks, Candace I guess I'll learn to use what I have or get my other machine out. I wish I had room to have both machines out at one time. I did try the Jenome high shank foot but the bar that goes over the needle screw isn't long enough. It just doesn't fit just right. You might get it it work but I was afraid to try it.
Thanks everyone for your help.
Thanks everyone for your help.
#8
Senior Member
Thread Starter
Join Date: Jan 2014
Location: Southern Illinois
Posts: 303
I called Allbrands and they have an Janome even feed foot with a guide that they say will fit the 1500s. I ordered one, so we will see. If it doesn't fit I'll just send it back.
#9
Super Member
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
If the Janome foot is also for a SS machine, it may work properly.
Last edited by Candace; 07-02-2014 at 09:42 AM.
#10
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,556
I'm looking forward to hearing Annie Pearl's experience with this new foot.
Thread
Thread Starter
Forum
Replies
Last Post