Chain piecing - thread keeps breaking - why?
#1
Super Member
Thread Starter
Join Date: Sep 2014
Location: Victorian Sweatshop Forum
Posts: 1,271
Chain piecing - thread keeps breaking - why?
I haven't done much chain piecing but I'm doing it for my current quilt. I find that when I reach the spot between the fabric squares where my needle is not puncturing fabric, my thread breaks. Not every time, but enough that it's annoying. Am I doing something wrong? I changed my thread but that didn't help.
Thanks!
Thanks!
#4
You might try pushing your next piece in directly after the one just leaving the presser foot. Don't leave more than one thread without fabric under the needle. Hope that makes sense. Obviously your machine doesn't like to sew without fabric. good luck Gina
#7
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
What size needle is in your machine? You may need a bigger size and/or a different type of needle. If you provide the type of thread you are using and the needle size, someone can tell you if they are appropriate or what might work better for you.
Also, sounds to me as if your upper tension may be a little too tight. Have you tried lowering the tension?
Also, sounds to me as if your upper tension may be a little too tight. Have you tried lowering the tension?
#8
Super Member
Thread Starter
Join Date: Sep 2014
Location: Victorian Sweatshop Forum
Posts: 1,271
Thanks native texan and prism99. I'm using a size 12 needle. This particular piecing is the 3rd stage of this quilt and now that you've jogged my memory, there was some chain stitching previously that worked ok. Maybe I need to change my needle? Would that cause the thread to break? It's easy enough to try, so I'll do that. The tension is ok, both types of thread are no-name brands but they've both worked fine in the rest of the quilt.
#9
Super Member
Join Date: Nov 2010
Location: Utah
Posts: 2,093
Yep, could be a bad needle. Or a burr on the needle plate or even a burr on the hook. You can polish the burrs of with a very fine sandpaper -- about 400 -500 gritt.
I hope you'll get it figured out and be happily chain-piecing away, very soon.
I hope you'll get it figured out and be happily chain-piecing away, very soon.
#10
Kenmore ... definitely change the needle, yes, an old needle can cause the thread to break. There could be a burr on the eye.
When I chain piece I always finish with the needle down. As soon as one piece is finished, I lift the presser foot slightly (enough to slide the fabric under, but not enough to disengage the tensioner), and slide the next piece until it touches the needle making sure to also slide it far enough to the right to get the correct seam allowance. I usually have just enough space between pieces to snip the threads.
When I chain piece I always finish with the needle down. As soon as one piece is finished, I lift the presser foot slightly (enough to slide the fabric under, but not enough to disengage the tensioner), and slide the next piece until it touches the needle making sure to also slide it far enough to the right to get the correct seam allowance. I usually have just enough space between pieces to snip the threads.
Thread
Thread Starter
Forum
Replies
Last Post