Go Back  Quiltingboard Forums >
  • Main
  • Working with Wool >
  • Working with Wool

  • Working with Wool

    Thread Tools
     
    Old 02-16-2017, 07:13 AM
      #1  
    Senior Member
    Thread Starter
     
    Ann Marie O's Avatar
     
    Join Date: Dec 2010
    Location: Michigan
    Posts: 345
    Default Working with Wool

    I have never worked with wool and am looking for some suggestions on what works best. My quilt guild is starting a new block of the month applique wall hanging and I have gathered the wool I need but am wondering what people find works best - iron on, pinning the pieces, glue??? Any suggestions or help is much appreciated. Thanks!
    Ann Marie O is offline  
    Old 02-16-2017, 10:36 AM
      #2  
    Power Poster
     
    Join Date: Apr 2011
    Location: Ontario, Canada
    Posts: 17,827
    Default

    Good for you for trying something new.

    Wool can be quite stretchy, so you are smart to be thinking ahead, before you get into it.
    I am sure you are not the only one in your Guild that will be new to working with wool.

    I would hope that if a Guild is starting this as a new project, that they will be taking the newbies into consideration and will be providing the help needed, with each BOM, in order to complete it.

    Otherwise, I would fear there will be a lot of frustrations ..... and perhaps abandonment.
    QuiltE is offline  
    Old 02-16-2017, 12:54 PM
      #3  
    KLO
    Super Member
     
    Join Date: Aug 2010
    Location: North Central, NC
    Posts: 2,741
    Default

    On youtube, I have watched the three tutorials given by Anna Bates of the Quilt Roadies or as her website is known, Woolie Mammoth. If you just put in "Anna Bates Wool Tutorial", you should be able to find it. She uses two kinds of fusibles because she travels a lot and takes her wool stitching with her on the road. Don't know if you will want to do it her way but it was interesting to see her technique.
    KLO is offline  
    Old 02-16-2017, 04:07 PM
      #4  
    Power Poster
     
    Join Date: Feb 2009
    Location: Northern Michigan
    Posts: 12,861
    Default

    I do a lot of wool appliqué. I pin my pieces in place and just hold them when stitching. I do know people who use fusible web but I've never had luck with that and find it difficult to hand stitch through - same problem with glue so I just stick with pins & holding my pieces.
    ckcowl is offline  
    Old 02-17-2017, 02:59 AM
      #5  
    Super Member
     
    Join Date: Aug 2010
    Posts: 2,237
    Default

    I arrange all the pieces and take a picture with my phone. Then I pin or glue stick the pieces as I deal with them. The photo helps me put them where they need to go.
    Mkotch is offline  
    Old 02-17-2017, 01:38 PM
      #6  
    Senior Member
    Thread Starter
     
    Ann Marie O's Avatar
     
    Join Date: Dec 2010
    Location: Michigan
    Posts: 345
    Default

    Originally Posted by KLO
    On youtube, I have watched the three tutorials given by Anna Bates of the Quilt Roadies or as her website is known, Woolie Mammoth. If you just put in "Anna Bates Wool Tutorial", you should be able to find it. She uses two kinds of fusibles because she travels a lot and takes her wool stitching with her on the road. Don't know if you will want to do it her way but it was interesting to see her technique.
    I watched her tutorials and found them very helpful - thanks for telling me about her
    Ann Marie O is offline  
    Old 02-18-2017, 05:14 AM
      #7  
    Super Member
     
    Join Date: Sep 2010
    Location: Delaware
    Posts: 1,020
    Default

    I staple my prices with a household stapler. Remove by lifting one leg from the back side,once piece is appliquéd, turn to the front and carefully unhook last leg. Leaves no visible holes, is secure and no pins to get thread caught in while sewing. If I can not reach to staple, I simply baste in place with very large stickers and regular sewing thread. And remove baste thread once complete. The only time I use fusible is if I have piece that just doesn't want to felt well and has lose edges. Then and only then will I use fusible. Some people use it all the time but I just plain don't like to sew through it. You may also want to use an interfacing on the back of your base fabric if using cotton to give the background more stability. But if your blocks are not big, it will not be necessary. Relax, have fun and enjoy learning something new. I hate traditional appliqué work but love wool. Just be careful. It can be a slippery slope and you will end up with both a cotton stash and a wool one too��
    Lena1952 is offline  
    Old 02-18-2017, 05:46 AM
      #8  
    Junior Member
     
    Join Date: Oct 2011
    Posts: 113
    Default

    I use soft fuse on my wool applique. It has no bulk and no goo on needle when you applique. The woman who told me about it said to use steam so I do. Love this stuff. Wool applique is addictive. In 2 1/2 years I have finished 4 quilts, a table runner and at least a dozen decorative pillows. Pinterest has lots of fun projects to look at.
    dottiequilts is offline  
    Old 02-18-2017, 07:43 AM
      #9  
    Senior Member
    Thread Starter
     
    Ann Marie O's Avatar
     
    Join Date: Dec 2010
    Location: Michigan
    Posts: 345
    Default

    Originally Posted by dottiequilts
    I use soft fuse on my wool applique. It has no bulk and no goo on needle when you applique. The woman who told me about it said to use steam so I do. Love this stuff. Wool applique is addictive. In 2 1/2 years I have finished 4 quilts, a table runner and at least a dozen decorative pillows. Pinterest has lots of fun projects to look at.
    I just ordered some Soft Fuse online so will wait to get it before starting my project - thanks!
    Ann Marie O is offline  
    Old 02-18-2017, 07:45 AM
      #10  
    Senior Member
    Thread Starter
     
    Ann Marie O's Avatar
     
    Join Date: Dec 2010
    Location: Michigan
    Posts: 345
    Default

    Originally Posted by Lena1952
    I staple my prices with a household stapler. Remove by lifting one leg from the back side,once piece is appliquéd, turn to the front and carefully unhook last leg. Leaves no visible holes, is secure and no pins to get thread caught in while sewing. If I can not reach to staple, I simply baste in place with very large stickers and regular sewing thread. And remove baste thread once complete. The only time I use fusible is if I have piece that just doesn't want to felt well and has lose edges. Then and only then will I use fusible. Some people use it all the time but I just plain don't like to sew through it. You may also want to use an interfacing on the back of your base fabric if using cotton to give the background more stability. But if your blocks are not big, it will not be necessary. Relax, have fun and enjoy learning something new. I hate traditional appliqué work but love wool. Just be careful. It can be a slippery slope and you will end up with both a cotton stash and a wool one too��
    Thanks - I can already see my "stash" of wool growing - lol
    Ann Marie O is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    pumpkinpatchquilter
    Main
    19
    01-16-2015 11:02 AM
    pumpkinpatchquilter
    Main
    9
    01-12-2015 04:07 AM
    AUQuilter
    Main
    6
    07-15-2012 04:41 AM
    AFQSinc
    Main
    1
    01-09-2012 06:41 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter