Another On Point Question...number of blocks
#1
Another On Point Question...number of blocks
If I am doing an on point quilt, queen size of (approx) 90 x 108, with 8" borders and 10" (finished) blocks, am I going to need the same amount of blocks I would need if I were doing a straight setting?
How do I figure that out?
I searched the 'net but couldn't find an answer, although now I know what size to make the side triangles and corners.
Thanks,
Watson
How do I figure that out?
I searched the 'net but couldn't find an answer, although now I know what size to make the side triangles and corners.
Thanks,
Watson
#2
With 10" finished blocks, the block's diagonal measurement will be about 14". Your 8" borders take up about 16" total i each direction, so you want your inside quilt measurement to be about 90-16 x 108-16, or 74"x92". To get the number of blocks needed tip-to-tip in the vertical direction, divide 92 by 14, which gives 6.5. You can either round up or down, so suppose you decide to round down to 6. In the horizontal direction you need 74/14 blocks tip-to-tip, or about 5 blocks. So far you need 6 rows of 5 blocks all tip-to-tip, but you also need to fill in the spaces around them. This will be an array of one fewer rows by one fewer blocks, or 5 rows of 4 blocks. So you need 6x5 + 5x4 = 50 blocks, plus setting triangles.
If you were to make the quilt with a straight setting you would need the same interior size, but the math is simpler. In the vertical direction to make 92" you can use 9 blocks (90") and in the horizontal direction to make 74" you can use 7 blocks (70"). This means 9x7=63 blocks, but you don't need any setting triangles.
If you were to make the quilt with a straight setting you would need the same interior size, but the math is simpler. In the vertical direction to make 92" you can use 9 blocks (90") and in the horizontal direction to make 74" you can use 7 blocks (70"). This means 9x7=63 blocks, but you don't need any setting triangles.
#3
Super Member
Join Date: Sep 2014
Location: Middlebury, IN
Posts: 1,484
A helpful site (although it takes a little practice) is MyWebQuilter.com for those of us who aren't as good as Dunster! Maybe you can get some useful information from it.
http://mywebquilter.com/quilt.aspx
http://mywebquilter.com/quilt.aspx
#4
A helpful site (although it takes a little practice) is MyWebQuilter.com for those of us who aren't as good as Dunster! Maybe you can get some useful information from it.
http://mywebquilter.com/quilt.aspx
http://mywebquilter.com/quilt.aspx
#5
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,654
With 10" finished blocks, the block's diagonal measurement will be about 14". Your 8" borders take up about 16" total i each direction, so you want your inside quilt measurement to be about 90-16 x 108-16, or 74"x92". To get the number of blocks needed tip-to-tip in the vertical direction, divide 92 by 14, which gives 6.5. You can either round up or down, so suppose you decide to round down to 6. In the horizontal direction you need 74/14 blocks tip-to-tip, or about 5 blocks. So far you need 6 rows of 5 blocks all tip-to-tip, but you also need to fill in the spaces around them. This will be an array of one fewer rows by one fewer blocks, or 5 rows of 4 blocks. So you need 6x5 + 5x4 = 50 blocks, plus setting triangles.
If you were to make the quilt with a straight setting you would need the same interior size, but the math is simpler. In the vertical direction to make 92" you can use 9 blocks (90") and in the horizontal direction to make 74" you can use 7 blocks (70"). This means 9x7=63 blocks, but you don't need any setting triangles.
If you were to make the quilt with a straight setting you would need the same interior size, but the math is simpler. In the vertical direction to make 92" you can use 9 blocks (90") and in the horizontal direction to make 74" you can use 7 blocks (70"). This means 9x7=63 blocks, but you don't need any setting triangles.
#6
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,654
There is no rule/law that says that the side and top/bottom borders have to be the same width. If you have to have an "exact" finished size - the borders are the place to make adjustments to "make it fit."
Munster would have made it look nicer with EQ - but graph paper, pencil, eraser, and a calculator work well for me.
Munster would have made it look nicer with EQ - but graph paper, pencil, eraser, and a calculator work well for me.
Last edited by bearisgray; 04-20-2017 at 08:02 AM.
#8
humphf!! something going on with my computer. can't get links to work. I will ask my son when he gets home.
doing on point i number blks differently. second row would be 2,3 and 4 and then so on to other rows. Visuals are great though!!
doing on point i number blks differently. second row would be 2,3 and 4 and then so on to other rows. Visuals are great though!!
Thread
Thread Starter
Forum
Replies
Last Post
K-Roll
For Vintage & Antique Machine Enthusiasts
16
04-11-2016 09:47 PM
rebeccapie
For Vintage & Antique Machine Enthusiasts
5
12-09-2014 06:04 PM
Rhonda Lee
Main
9
04-11-2013 03:54 AM
Yamaha_Mama
For Vintage & Antique Machine Enthusiasts
5
04-16-2012 09:35 AM
Kristin in ME
Main
8
07-22-2011 01:23 PM