Go Back  Quiltingboard Forums > Main
Help PUCKERS are getting the best of me >

Help PUCKERS are getting the best of me

Help PUCKERS are getting the best of me

Old 11-09-2012, 06:07 AM
  #1  
Member
Thread Starter
 
Join Date: Oct 2011
Posts: 70
Wink Help PUCKERS are getting the best of me

I am in need of some help please anyone. I am appliqueing some animals on a quilt (machine applique) when I get all around the animal I have puckers at the end of the material. Like there is too much material for the room I have left to applique. I am not good at describing things. What am I doing wrong? I suppose I could go to the next train car and ask for help but they are all busy, something about disappearing blocks, I said if they are disappearing why spend so much time making them. They just laughed at me must be some inside joke. Or else the girls had to much Kool Aid?
ShiAnnF is offline  
Old 11-09-2012, 07:17 AM
  #2  
Power Poster
 
QuiltnNan's Avatar
 
Join Date: Mar 2011
Location: western NY formerly MN, FL, NC, SC
Posts: 51,433
Default

it sounds to me like you need to put more pins in the applique to keep it where it belongs. or you can put a fusible on the back and fuse it to the background fabric so that it does not move while you are sewing.
QuiltnNan is offline  
Old 11-09-2012, 07:25 AM
  #3  
Member
 
Join Date: Nov 2012
Location: Ontario, Canada
Posts: 20
Default

Originally Posted by QuiltnNan View Post
it sounds to me like you need to put more pins in the applique to keep it where it belongs. or you can put a fusible on the back and fuse it to the background fabric so that it does not move while you are sewing.
Yep and yep! Exactly what I was going to recommend. Also, when I sew I hold the bottom (not applique) firmer than the applique so that it "stretches" more. Does that make sense?
elizabeth_agd is offline  
Old 11-09-2012, 07:26 AM
  #4  
Senior Member
 
Toni C's Avatar
 
Join Date: Mar 2009
Location: Crosby,Texas
Posts: 849
Default

Did you use a stabilizer under the block? What kind of stitch are you appliqueing with? Usually with machine applique you could get tunneling with satin stitch if it's to tight which would kind of gather your material = puckers
Toni C is offline  
Old 11-09-2012, 07:27 AM
  #5  
Power Poster
 
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,431
Default

I have found that you will get little puckers around an appliqué if the Zig Zag stitching is dense. You can do a few things to help....put a stabilizer under the background fabric to sew through to prevent tunneling, open up the Zig Zag a little so it's less dense or switch to the buttonhole edge finish instead.
Another method of doing appliqué is to stitch about 1/8 in from the appliqué edge and let the fabric edges fray. This method is called raw edge appliqué and I find it works best with batiks that fray less. Unless that is the look you are going for like in the French Rose bed runner?
Tartan is offline  
Old 11-09-2012, 07:28 AM
  #6  
Super Member
 
kristakz's Avatar
 
Join Date: Oct 2011
Location: Ottawa, Ontario, Canada
Posts: 1,111
Default

I find that a stabilizer is needed, to avoid puckering in applique. As QuiltnNan said - you can use fusible. I actually used a piece of paper last time - layer paper, quilt, applique and stitched through all 3. Worked great, and then I tore it off, like paper piecing.
Next train car? Am I missing something? Sounds like your friends are making disappearing 9-patches http://www.popularpatchwork.com/site...structions.pdf
kristakz is offline  
Old 11-09-2012, 08:36 AM
  #7  
Super Member
 
AliKat's Avatar
 
Join Date: Apr 2007
Location: Phoenix, AZ
Posts: 2,943
Default

Okay, right now you have some puckering.

I prefer to either do a light bonding with fusible web or glue baste with school glue or other water soluble glue. Pins and I don't work all that well together due to my arthritis.

Though you could pin more, use stabilizer, and adjust your stitch. Heck you could even put it in a thin edged embroidery hoop to keep the background flat while you sew.

ali
AliKat is offline  
Old 11-09-2012, 09:23 AM
  #8  
Member
Thread Starter
 
Join Date: Oct 2011
Posts: 70
Default

I was referring to the train for the mystery quilt. I was just kidding about the disappearing nine patch I know what it is.
Originally Posted by kristakz View Post
I find that a stabilizer is needed, to avoid puckering in applique. As QuiltnNan said - you can use fusible. I actually used a piece of paper last time - layer paper, quilt, applique and stitched through all 3. Worked great, and then I tore it off, like paper piecing.
Next train car? Am I missing something? Sounds like your friends are making disappearing 9-patches http://www.popularpatchwork.com/site...structions.pdf
ShiAnnF is offline  
Old 11-09-2012, 09:25 AM
  #9  
Member
Thread Starter
 
Join Date: Oct 2011
Posts: 70
Default

Thank You All, I will tru the stabilizer, I am using pins, lots of pins. I like the sounds of the glue also.
ShiAnnF is offline  
Old 11-09-2012, 09:32 AM
  #10  
Super Member
 
Join Date: Nov 2010
Location: Cadillac, MI
Posts: 6,487
Default

1) fusible web 2) stabilizer 3) foot with room for the satin stitch - mine is called the embroidery foot 4) lengthen the stitches a tiny bit so you're not putting down as much thread 4) raise the presser foot and readjust the fabric on tight curves to release the pressure a bit - no sharp turns, just not pushing the fabric. I forgot the stabilizer on my last one and it worked fine. Years ago I used tissue paper on the back and it was enough.
irishrose is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sinceresissy
Main
25
07-14-2022 01:08 PM
quiltykim
Main
13
11-25-2016 12:28 PM
CajunQuilter2
Main
43
06-04-2010 07:31 AM
Debbie B
Main
17
03-29-2010 12:40 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter