Help!
10-29-2011, 06:43 AM
#1
Super Member
Thread Starter
Join Date: Oct 2011
Location: Vermont
Posts: 2,315
I want to sew a 40 x 60"throw blanket. One side is thicker cotton and the other is fleece. I have made fleece - to - fleece but I have never done two different fabrics to fleece. I have a newJanome 2011 and love it so need all info I can get. Stretch, needles, thread (I use Gutermann usually), stitches, etc.. Also what I need to hold it together -
10-29-2011, 07:15 AM
#2
Super Member
Join Date: May 2007
Location: Oregon
Posts: 2,042
Originally Posted by jetayre
I want to sew a 40 x 60"throw blanket. One side is thicker cotton and the other is fleece. I have made fleece - to - fleece but I have never done two different fabrics to fleece. I have a newJanome 2011 and love it so need all info I can get. Stretch, needles, thread (I use Gutermann usually), stitches, etc.. Also what I need to hold it together -
Fleece has a lot more stretch then cotton. You say that your cotton is thicker ~ is it a 'quilting' cotton or something heavier like poplin or broadcloth? Are you piecing the cotton side? Or are you just wanting to 'sandwich' the two fabrics together? IMHO (In My Humble Opinion), I would put 'like' fabrics together, because of the stretch factor.
10-29-2011, 07:22 AM
#3
Super Member
Thread Starter
Join Date: Oct 2011
Location: Vermont
Posts: 2,315
I know I am asking for it to put the two fabrics together, but I was hoping some one has and had success so I could do it. The cloth is close to broadcloth and had airplanes on it and that is why I need to use it rather than a generic. Would a stretch stich do it and what setting for the fleece and cotton together?
10-29-2011, 07:32 AM
#4
Member
Join Date: Oct 2011
Location: Parker, Colorado
Posts: 3
A few years ago I made a baby quilt using a pieced cotton top and fleece backing. The top design perfectly lended itself to SID so I was able to carefully avoid the stretching issue. I did not need batting. It turned out so soft and cuddly. It washed well, and when dried it came out great looking. Good luck!
10-29-2011, 08:53 AM
#5
Power Poster
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
i've made lots of quilts with cottons on the top and fleece backs- some i've used batting in, a couple i did not- it is up to you =
use a regular sharp or universal needle-
i recommend poly thread instead of cotton.
smooth the fleece= don't stretch it when you put the sandwich together- or you could tie it- that works well too with fleece.
it is not any more difficult to use than any other fabric.. a little thicker- you might need to adjust (loosen) your tension a little- but you may not have to- i've never had to- fleece quilts up beautifully. just baste well-either with pins every 4" or with needle and thread-- and smooth it--don't stretch it.
use a regular sharp or universal needle-
i recommend poly thread instead of cotton.
smooth the fleece= don't stretch it when you put the sandwich together- or you could tie it- that works well too with fleece.
it is not any more difficult to use than any other fabric.. a little thicker- you might need to adjust (loosen) your tension a little- but you may not have to- i've never had to- fleece quilts up beautifully. just baste well-either with pins every 4" or with needle and thread-- and smooth it--don't stretch it.
10-29-2011, 09:07 AM
#6
Super Member
Thread Starter
Join Date: Oct 2011
Location: Vermont
Posts: 2,315
Thank you so much for you input.
Originally Posted by ckcowl
i've made lots of quilts with cottons on the top and fleece backs- some i've used batting in, a couple i did not- it is up to you =
use a regular sharp or universal needle-
i recommend poly thread instead of cotton.
smooth the fleece= don't stretch it when you put the sandwich together- or you could tie it- that works well too with fleece.
it is not any more difficult to use than any other fabric.. a little thicker- you might need to adjust (loosen) your tension a little- but you may not have to- i've never had to- fleece quilts up beautifully. just baste well-either with pins every 4" or with needle and thread-- and smooth it--don't stretch it.
use a regular sharp or universal needle-
i recommend poly thread instead of cotton.
smooth the fleece= don't stretch it when you put the sandwich together- or you could tie it- that works well too with fleece.
it is not any more difficult to use than any other fabric.. a little thicker- you might need to adjust (loosen) your tension a little- but you may not have to- i've never had to- fleece quilts up beautifully. just baste well-either with pins every 4" or with needle and thread-- and smooth it--don't stretch it.
10-29-2011, 03:02 PM
#8
Super Member
Join Date: Apr 2007
Location: Manhattan, Kansas
Posts: 2,160
Originally Posted by jetayre
I know I am asking for it to put the two fabrics together, but I was hoping some one has and had success so I could do it. The cloth is close to broadcloth and had airplanes on it and that is why I need to use it rather than a generic. Would a stretch stich do it and what setting for the fleece and cotton together?
10-29-2011, 05:21 PM
#10
Super Member
Join Date: May 2011
Posts: 4,688
Welcome -- I am not familiar with the Janome 2011, I have the Janome Horizon 7700.
I have made quilts with fleece on one side and cotton on the other. Sometime I spray baste and bind (no batting). Having the cotton on one side stabilizes the fleece so it can be quilted. I have also finished the quilts envelops style, but was not as happy with it since the fleece stretched a bit more.
A lot depends on the size of the quilt -- the bigger the quilt the more likely there could be stretching so the spray basting is the best way to go.
I have made quilts with fleece on one side and cotton on the other. Sometime I spray baste and bind (no batting). Having the cotton on one side stabilizes the fleece so it can be quilted. I have also finished the quilts envelops style, but was not as happy with it since the fleece stretched a bit more.
A lot depends on the size of the quilt -- the bigger the quilt the more likely there could be stretching so the spray basting is the best way to go.
Thread
Thread Starter
Forum
Replies
Last Post
Crissie
General Chit-Chat (non-quilting talk)
12
11-21-2009 08:50 PM
