Go Back  Quiltingboard Forums > Main
I can't use a rotary cutter >

I can't use a rotary cutter

I can't use a rotary cutter

Old 10-19-2011, 08:38 PM
  #101  
Super Member
 
chuckbere15's Avatar
 
Join Date: Dec 2010
Location: Madison Heights, MI
Posts: 1,069
Default

Also, I don't know if anyone else stated, but I will let you in on a little secret. When using a rotary cutter and a longer ruler than your hand, stop the blade at the end of your hand and reposition your hand further down the ruler. Again, stop the blade before moving your hand. When you go past your hand it acts like a pivot point and you will have less than straight lines. Another trick I learned is to rest the outer two fingers on your fabric and the other three on the ruler.

I haven't tried it it, but Joanns sells a product that you can mount on the bottom of the ruler to aid in the ruler from not slipping. I was in a shop hop and the lady that was cutting my fabric show me the hand trick and then let me try. It diffinitly will help as it did me. I heard that the sell little stick on circles that grip the fabric.
chuckbere15 is offline  
Old 10-19-2011, 08:56 PM
  #102  
Super Member
 
chuckbere15's Avatar
 
Join Date: Dec 2010
Location: Madison Heights, MI
Posts: 1,069
Default

Originally Posted by Cosy
My problem is not slippage, at least not so much. My problem is getting the fabric actually cut. Even with a brand new blade, even cutting single layers, I get a lot of skips, where the fabric just isn't cut. If I go back, then the 2nd cut doesn't quite line up. I have an olfa 45 ml that I use mostly. I work on either my dinner table or the kitchen counter, the height doesn't seem to make a diference. I end up either using scissors or for strips, tearing. Any advice here?
I would find a guild and ask someone there for pointers. Take a yard, your ruler, and cutter. Go early, you may have to pay a guest fee, but two things will happen. First, someone will be more than happy to pass on their knowledge. This I learned from this board and the two guilds that I belong to. Another member mentioned having someone watch you and give pointers on technique. Second, you will make new friends and possibly join the guild.

I posted another comment before this reply as I'm now reading everyone advice, please take a look at my other comment and I bet you hand placement is all wrong as mine was.
chuckbere15 is offline  
Old 10-19-2011, 09:23 PM
  #103  
Senior Member
 
Join Date: Oct 2009
Location: Snohomish WA
Posts: 884
Default

My cutting has improved since I started putting several dabs of clear "rubber cement" on the backs of my rulers so
they don't slip. Works much better for me than using those suck-on handles or the peel & stick non-slip clear backings. When they begin to wear off, just reapply new dabs (you can remove them anytime by just rolling your finger over the edges & they roll up & off).

Also, the June Tailor Shape Cut is great for getting straight cuts. My only regret about it is that I bought the 12" one instead of the larger one. It's been worth the $$ for me as it eliminates 'elbows' in long strips. Since I bought the smaller one, I often have to fold the fabric a time or two before cutting, in which case I use a 60mm rotary cutter to cut through the four layers more easily than with a 45mm blade; easier on my hands.
postal packin' mama is offline  
Old 10-20-2011, 04:17 PM
  #104  
Super Member
 
Join Date: Jan 2011
Location: Port Lavaca, TX
Posts: 1,276
Default

Originally Posted by antiquegirl68
I don't think it is because you are left handed, I have the same problem but was thinking it is something wrong with me. It looks straight until I cut it and then it looks like I was drunk or something I hold my ruler there and everything but still comes out crazy.
Try this, Hold the ruler on the fabric with your left hand. Using your left hand will keep the fabric and ruler from wobbling. Using a fresh sharp blade, use your right hand to run the blade along the right edge of the ruler, cutting off a piece of fabric the exact size you want. It is just cutting, nothing fancy to holding the rotary cutter, just take it slow.
jpthequilter is offline  
Old 10-20-2011, 04:49 PM
  #105  
Senior Member
 
Join Date: Oct 2010
Location: in my stash mostly
Posts: 882
Default

One in my group is left handed, teacher put the blade on the opposite side for her and it works great.

Hope this helps, she did well after a bit ofpractice.
delma_paulk is offline  
Old 10-20-2011, 06:10 PM
  #106  
Super Member
 
sewingsuz's Avatar
 
Join Date: Nov 2010
Location: Arizona
Posts: 7,850
Default

I am a lefty and I have the same problem about what side. We cannot do the cutting the same as right haned. It does make a big difference.
Originally Posted by 3incollege
I am left handed and I only had a problem of which side to cut. Make sure you are presses down hard enough.
Just practice and you will get the hang of it. Are you changing your blades?
sewingsuz is offline  
Old 10-20-2011, 07:53 PM
  #107  
Senior Member
Thread Starter
 
auniqueview's Avatar
 
Join Date: Aug 2011
Location: Ft. Myers, Fl
Posts: 582
Default

I used the rotary cutter to cut a panel out of some fabric I bought at a yard sale. DOn't ask me what it is, lol...but it is soft and silky feeling. I cut a panel out and made a bag, and had no trouble following my line. Thanks for tipping me to switching the blade to the other side.
Attached Thumbnails attachment-274675.jpe  
auniqueview is offline  
Old 10-21-2011, 07:50 PM
  #108  
Junior Member
 
Join Date: Aug 2011
Location: York, South Carolina
Posts: 263
Default

Originally Posted by Prism99
A much cheaper thing to try out first (for straight strips) would be a June Tailor Shape Cut mat. This is a flexible mat with cut-outs to hold your rotary cutter in place as you roll. If your problem is with how you are holding the rotary cutter (the blade should not be tilted as you roll), it will show up when you use this mat.
I agree. The Shape Cut mat could be your answer. The slots hold your blade in place and make your cuts straight. I really love mine and use it everytime I cut fabrics for a quilt.
AnnR is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bearisgray
Main
3
09-16-2014 06:38 AM
Quiltforme
Main
67
05-28-2013 05:50 AM
meg-2
Main
5
01-02-2012 03:06 PM
quiltnmore
Main
17
03-13-2011 10:09 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter