I have a question----
#11
I would call it like Melisa, "Discombabulated" I never heard of having to alternate the way you piece them together. Before you do anything iron what you have put together already and see if it looks crooked eye to you.
It could be that some of the seam allowences are wider than others or the fabric itself.
It could be that some of the seam allowences are wider than others or the fabric itself.
#12
Super Member
Join Date: Jul 2007
Location: Minnesota
Posts: 1,097
One way to avoid this is to work in smaller units and then join the smaller units to make your panel.
If your panel has 24 strips, sew 12 sets of 2 strips. Then sew the strip pairs together in pairs, so you have 6 sets of 4 strips. Then join those so you have 3 sets of 8 strips. Sew the 3 units together. By working with larger, more stable units, you are less likely to pull them out of shape.
If your panel has 24 strips, sew 12 sets of 2 strips. Then sew the strip pairs together in pairs, so you have 6 sets of 4 strips. Then join those so you have 3 sets of 8 strips. Sew the 3 units together. By working with larger, more stable units, you are less likely to pull them out of shape.
#16
Super Member
Join Date: Nov 2006
Location: Missouri
Posts: 1,822
abacus, could it be the pressing that is deforming the shape??If you are sure you are sewing exactly or pretty darn close, to a 1/4" seam and all looked pretty good till you ironed it...could be the way you are pressing your fabric. I know, for I had to fight this for a long time...I like to press hard and go from left to right...a big no no in causing the fabric to move. There are many free videos out there to watch w/the proper way to iron. I have to hummm the words in my head still:))In fact, I just might not be very safe w/an iron:))LOL Just a thought on that subject...Skeat
*If you don't have a 1/4 guide on your foot...then use quilting tape to mark your line on the machine itself to give you a guide.
*If you don't have a 1/4 guide on your foot...then use quilting tape to mark your line on the machine itself to give you a guide.
#17
Originally Posted by Barb M
hmmm, when i do strip piecing, i always make my strips an inch longer than they need be, then after i've sewn my strips, i just do a straight trim across the top edge.
#19
Originally Posted by Marcia
Originally Posted by Barb M
hmmm, when i do strip piecing, i always make my strips an inch longer than they need be, then after i've sewn my strips, i just do a straight trim across the top edge.
#20
Member
Thread Starter
Join Date: May 2008
Location: OKC, OK
Posts: 60
Thank you, girls, for your input. The Olympics are coming up; taking out a couple of columns will be good television work. I have a seam guide on my sewing machine (actually it is picture mounting tape which has some depth to it. Really good for butting your fabric against), and I haven't pressed it yet. I think I will try to rip out some and see if that helps.
Again, I appreciate all of your ideas Thanks, so much.
Again, I appreciate all of your ideas Thanks, so much.
Thread
Thread Starter
Forum
Replies
Last Post
Important(going to fabric shop 2morrow; IF YOU HAVE 2 PICK ONE RULER WHICH ONE WOULD IT HAVE TO BE??
sunnyhope
Main
23
06-29-2009 04:46 PM