I need some help please
#1
Power Poster
Thread Starter
Join Date: May 2008
Location: FL
Posts: 16,574
I'm trying to make corner triangles and the ones in between the tulip blocks. I'm having a hard time figuring out what size to cut them.
Can someone please help? I did this in EQ5.
block size is 12" (tulip)
inside rectangle is 38 X 50
1st border 4"
2nd border 6"
The quilt is supposed to be 58 x 70 finished
I sure would appreciate it. I'm trying to learn triangles like these, but just don't get it yet :cry:
Thanks!
Can someone please help? I did this in EQ5.
block size is 12" (tulip)
inside rectangle is 38 X 50
1st border 4"
2nd border 6"
The quilt is supposed to be 58 x 70 finished
I sure would appreciate it. I'm trying to learn triangles like these, but just don't get it yet :cry:
Thanks!
#2
Moderator
Join Date: Jan 2007
Location: In the middle of a mess...
Posts: 20,027
Ok, that just made my head hurt!
Wouldn't the inside triangles be....ok. lets see if I can explain MY thinking on this.
Take a square, the same size at the tulips, then make a triangle out of it. That SHOULD be the size of what you need.
But, that's my thinking.
OR, this is what I'd do too....not sure anyone would agree with me...
I'd take a BIGGER triangle...sew it to the corner, then square it off. Then measure it, including the 1/4 in seam allowance that that would be the size you would need.
I'm probably way off on this, but in my head, it would work for me.
Does it make any sense???
Wouldn't the inside triangles be....ok. lets see if I can explain MY thinking on this.
Take a square, the same size at the tulips, then make a triangle out of it. That SHOULD be the size of what you need.
But, that's my thinking.
OR, this is what I'd do too....not sure anyone would agree with me...
I'd take a BIGGER triangle...sew it to the corner, then square it off. Then measure it, including the 1/4 in seam allowance that that would be the size you would need.
I'm probably way off on this, but in my head, it would work for me.
Does it make any sense???
#3
Banned
Join Date: Aug 2008
Location: Kansas
Posts: 590
For half square triangles, take the finished size and add 7/8 of an inch and cut a square that size, then cut in half diagonally from corner to corner. This would be for your corner triangles as the bias edges will be attched to the quilt and the outside edges will end up on the straight of grain.
For the smaller ones, you will want to cut those as 1/4 square trianges so the straight of grain is on the outside long edge. Sorry, I cant give you the math on that one.
You could cut a template and add the 1/4 inch seams, then measure it and see what it measures.
Ill see if I can find the math for those.
Someone else will probably be able to give you the answer before I can find it though
For the smaller ones, you will want to cut those as 1/4 square trianges so the straight of grain is on the outside long edge. Sorry, I cant give you the math on that one.
You could cut a template and add the 1/4 inch seams, then measure it and see what it measures.
Ill see if I can find the math for those.
Someone else will probably be able to give you the answer before I can find it though
#4
Banned
Join Date: Aug 2008
Location: Kansas
Posts: 590
OK, I found it...
Quarter square triangles are cut using the finished size plus 1 1/4 inches.
Then cut in half on the diagonals both ways.... leaving the straight of grain on the long edge...
So,
For your big ones this is what I think...
Since your blocks are 12 inches and the triange spans two of them,
you would cut your square 24 7/8 inches and cut in half on the diagonal giving the big corner triangles.
The little ones are also based on this measurement, I think,, so
cut the square 25 1/4 and cut in half both ways giving you four triangles from each square with the straight of grain on the long edge.
I would do it with freezer paper first to make sure it fits..
Oh yeah, you need to measure your quilt blocks to make sure they ended up 12 inches as planned...
Judy
Quarter square triangles are cut using the finished size plus 1 1/4 inches.
Then cut in half on the diagonals both ways.... leaving the straight of grain on the long edge...
So,
For your big ones this is what I think...
Since your blocks are 12 inches and the triange spans two of them,
you would cut your square 24 7/8 inches and cut in half on the diagonal giving the big corner triangles.
The little ones are also based on this measurement, I think,, so
cut the square 25 1/4 and cut in half both ways giving you four triangles from each square with the straight of grain on the long edge.
I would do it with freezer paper first to make sure it fits..
Oh yeah, you need to measure your quilt blocks to make sure they ended up 12 inches as planned...
Judy
#6
Super Member
Join Date: Apr 2008
Location: Gulf Coast, FL
Posts: 1,420
Let's see... The big corner triangles:
if you look at the upper left you have two blocks side by side they are 12.5 unfinished, and when you sew those two together they will be 24.5' Cut a Square with sides of 24.5" Now cut it twice diagonally each way. Now you have the four big corner triangles you needed. SIMPLE. :D Now here's a big tip. if your blocks are a little small and your triangle is a little bit big find the center of both, pin from the center out, this will put any extra in your seams.
The little Triangles on the sides:
These are easy. Your blocks are 12.5 unfinished. Therefore the two sides are 12.5. Take one 12.5' SQUARE cut it in half diagonally one time and you will have two of those little triangles. Since you need 6 of these little triangles cut 3 squares.
See no math. :D
I love this pattern it's beautiful!
if you look at the upper left you have two blocks side by side they are 12.5 unfinished, and when you sew those two together they will be 24.5' Cut a Square with sides of 24.5" Now cut it twice diagonally each way. Now you have the four big corner triangles you needed. SIMPLE. :D Now here's a big tip. if your blocks are a little small and your triangle is a little bit big find the center of both, pin from the center out, this will put any extra in your seams.
The little Triangles on the sides:
These are easy. Your blocks are 12.5 unfinished. Therefore the two sides are 12.5. Take one 12.5' SQUARE cut it in half diagonally one time and you will have two of those little triangles. Since you need 6 of these little triangles cut 3 squares.
See no math. :D
I love this pattern it's beautiful!
#8
You could also figure out the size for the small triangles, then instead of making big triangles, make the big ones as two small ones with a centre seam, and they will be the exact same size as the other small ones. Sorry i cant figure the size, i would have just sewn them oversize and then trimmed :) But very very pretty quilt, just love it! :)
Thread
Thread Starter
Forum
Replies
Last Post
Jmncolts
Main
41
03-14-2012 05:25 AM
Flying_V_Goddess
Main
11
11-24-2007 04:37 PM