Go Back  Quiltingboard Forums >
  • Main
  • I'm about to kill my machine! >
  • I'm about to kill my machine!

  • I'm about to kill my machine!

    Thread Tools
     
    Old 09-25-2011, 04:03 PM
      #1  
    Senior Member
    Thread Starter
     
    wannaquilt1's Avatar
     
    Join Date: May 2011
    Location: Tennessee
    Posts: 751
    Default

    Does anyone know what causes the top thread to break when FMQ? It will be going fine for a few minutes and I'm making sure I go slow enough and everything will be going great then snap out of the blue it will snap. I don't know what to do i can't finish this quilt like this i just want to cry. My husband still won't tell me if i can get a new machine so i'm stuck with this one.

    do you think it could be because I spray basted it? does this have anything to do with it?
    wannaquilt1 is offline  
    Old 09-25-2011, 04:06 PM
      #2  
    Super Member
     
    vivoaks's Avatar
     
    Join Date: Oct 2009
    Location: Beaver PA USA
    Posts: 1,656
    Default

    I couldn't see that the spray basting would be the cause, unless you sprayed it so thick that it's stiff! Have you tried re-threading the machine? Sometimes that's all it takes. If you're really upset, take a break until tomorrow if possible. Start fresh, after re-threading, and try again.
    vivoaks is offline  
    Old 09-25-2011, 04:06 PM
      #3  
    Super Member
     
    Join Date: Jul 2011
    Posts: 1,515
    Default

    I doubt it is because you spray basted it. I just finished a a quilt with fmq that I spray basted and I didn't have any problem with thread breakage. I used King Tut for my thread this time and it worked like a dream.

    I also just finished fmq a tree skirt with metallic thread and it broke constantly. I figured it was the the thread since the King Tut worked so beautifully.

    Sorry no other advice from me.
    Xstitshmom is offline  
    Old 09-25-2011, 04:08 PM
      #4  
    Super Member
     
    Crqltr's Avatar
     
    Join Date: Aug 2011
    Location: Michigan
    Posts: 2,757
    Default

    Try changing your needle also...
    Crqltr is offline  
    Old 09-25-2011, 04:11 PM
      #5  
    Super Member
     
    DogHouseMom's Avatar
     
    Join Date: Jan 2011
    Location: Knot Merrill, Southern Indiana
    Posts: 5,781
    Default

    There are several possibilities.

    1) How old is your thread?
    2) What is your thread weight and what kind is it (ie cotton or poly, and who is manufacturer). Ditto the first two questions for the bobbin thread.
    3) What size needle are you using?
    4) When was the last time you replaced your needle (in aprox hours of machine usage)?
    5) Have you COMPLETELY re-threaded your machine? Remember, don't ever pull the thread out backwards through the tension discs to un-thread when the presser foot is down!! Always lift the presser foot first - or even better - snip the thread from the spool then pull the thread out from the needle through the machine.
    6) What kind of batting are you using?
    7) What kind of machine are you using (make and model)?

    Other than these things the other two possibilities off the top of my head are top tension and hand speed vs machine speed. But always start with the above questions first. If you answer those for us, we might have a better idea what could be wrong and make suggestions.
    DogHouseMom is offline  
    Old 09-25-2011, 04:12 PM
      #6  
    Super Member
     
    EasyPeezy's Avatar
     
    Join Date: Mar 2010
    Location: Canada
    Posts: 3,460
    Default

    Try a new needle. There might be a small burr that is not visible to the eye.
    This happened to me the other day and after I changed needle no more
    breakage. Didn't seem like it needed it but it did apparently. ;)
    EasyPeezy is offline  
    Old 09-25-2011, 04:12 PM
      #7  
    Power Poster
     
    Join Date: Mar 2011
    Location: Ontario, Canada
    Posts: 41,535
    Default

    When I had a thread snapping, I found it was the thread. It was an expensive machine quilting thread but it was making a little lint ball as it came to the needle. I changed threads and it was fine. If you are using a thread with the little slit on the spool side, that can catch and break the thread. If you are pulling your sandwich or the sandwich has drag on it, that can bend the needle enough that it clips the thread on the throat plate. Have you checked the tension and made sure the needle isn't bent? A bent needle can also clip the thread on the throat plate. I hope you can find the problem.
    Tartan is offline  
    Old 09-25-2011, 04:13 PM
      #8  
    Power Poster
     
    BellaBoo's Avatar
     
    Join Date: Jan 2009
    Location: Front row
    Posts: 14,646
    Default

    Loosen your tension to 0 and go up 1/2 at a time.

    My husband still won't tell me if i can get a new machine so i'm stuck with this one. ???????
    BellaBoo is offline  
    Old 09-25-2011, 04:19 PM
      #9  
    Senior Member
     
    Little RoO's Avatar
     
    Join Date: Jan 2011
    Location: England. UK
    Posts: 393
    Default

    Oh my....you sound so like me earlier this week when I posted a problem about my Janome and FMQ....I was at breaking point ...when Annaquilts suggested leaving the feed dogs....WOW what a different...I think I may have to take my machine in for a tune up though after messing so much with the tension....I haven't got a clue wether it is right or not because I have played with it so much! But tonight......Feed dogs up....away I went....first time since I have had this machine ( 2 months)....beautifully balanced FMQ with lovely tension front and back.....way to go so happy....did the whole border of a baby quilt.
    Just keep perservering....ask loads of questions and someone on this board will have the answer for you.....Good luck
    Little RoO is offline  
    Old 09-25-2011, 04:21 PM
      #10  
    Senior Member
     
    angiecub's Avatar
     
    Join Date: Jan 2011
    Location: Illinois
    Posts: 509
    Default

    Originally Posted by Tartan
    When I had a thread snapping, I found it was the thread. It was an expensive machine quilting thread but it was making a little lint ball as it came to the needle. I changed threads and it was fine. If you are using a thread with the little slit on the spool side, that can catch and break the thread. If you are pulling your sandwich or the sandwich has drag on it, that can bend the needle enough that it clips the thread on the throat plate. Have you checked the tension and made sure the needle isn't bent? A bent needle can also clip the thread on the throat plate. I hope you can find the problem.
    I agree with Tartan on the possibility of the thread getting caught on the spool. I've also had problems sometimes with the thread winding on the spool pin. It is maddening. I hope you figure it out so you can finish your quilt. If it pieces fine, I would guess it's not your machine.
    angiecub is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    reevesfarm
    Main
    83
    10-05-2011 03:56 AM
    sunnyhope
    Main
    54
    06-29-2011 02:35 AM
    gail-r
    General Chit-Chat (non-quilting talk)
    167
    06-22-2010 01:14 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter