Go Back  Quiltingboard Forums >
  • Main
  • Broken Needle Problems.  :(  *(Help!)* >
  • Broken Needle Problems. :( *(Help!)*

  • Broken Needle Problems. :( *(Help!)*

    Thread Tools
     
    Old 04-15-2013, 05:41 AM
      #1  
    Member
    Thread Starter
     
    Join Date: Apr 2013
    Posts: 3
    Default Broken Needle Problems. :( *(Help!)*

    Hi, I'm new, very intimidated. I'm sure you're all quite clever boffs compared to me.
    I wonder if anyone has time to brainstorm over my breaking needles problem?

    14month old Janome machine (model 2070). I made 2.5 quilts fine (use the machine for little else) but started frequently breaking needles on the last quilt whenever I used the Walking Foot. Am feeling very discouraged about it (woe is me).

    It's a standard-looking foot, with a little arm that stretches forward and rests on the needle screw. I've read that this little arm may be working the needle screw loose which would explain the breaking needles. Difficulty is that I can't find a different style of walking foot that doesn't have the little arm sitting on the screw.

    My googling must be pants today, so can someone link to an alternative style of walking foot (even feed foot) that fits Janome machines? Or think of something else that might be the problem?

    This is what I have that seems to be causing problems:
    http://www.coulingsewingmachines.co....-open-toe.html

    Many thanks in advance.
    Julii is offline  
    Old 04-15-2013, 05:55 AM
      #2  
    Junior Member
     
    Join Date: Mar 2013
    Posts: 221
    Default

    If it worked well in the beginning, I'm wondering if the foot could be defective so that it's wearing prematurely? Just guessing here. Hope you can get the problem resolved.
    toolazy is offline  
    Old 04-15-2013, 06:07 AM
      #3  
    Super Member
     
    Join Date: Feb 2013
    Posts: 1,340
    Default

    Are your needles breaking in your fabric? Are they hitting the stitch plate when going down? Are they actually hitting the walking foot on the way down? I had a problem for awhile where my needle placement changed of its own volition and wasn't going into the hole properly. After turning it off and on numerous times it fixed itself. Two other things that I'm sure you've thought of that are still worth mentioning, make sure your needle is all the way up where it belongs and screwed in tightly. Also, when you are sewing make sure the fabric is being fed by the machine and that you aren't pulling the fabric at all - that can cause enough tension to break the needles. I hope you can get your problem resolved soon without too much angst...there is nothing worse than a mystery problem that you have no idea how to solve. As toolazy said, maybe there is a problem with the walking foot and needs to be replaced. please keep us updated, we'd love to know what the problem was and how it was resolved!
    michelleoc is offline  
    Old 04-15-2013, 06:17 AM
      #4  
    Banned
     
    Join Date: Mar 2010
    Location: Sturbridge, Ma
    Posts: 3,992
    Default

    Is is a walking foot made for your machine (brand) or a generic foot. Generics sometime have problems. Try what has been suggested above, but also take everything out - thread and all......and slowly move the needle with hand wheel and where the needle may be hitting. Also to my knowledge - you said above the "the little arm stretches forward and rest above the screw" This arm should be like a claw and fit inside the screw and not above. Unless it is a type I am not famiiar with. This might sound simplistic but check the manual and make sure the walking foot is positioned correctly. It might not be if you have changed the foot between quilts.
    Holice is offline  
    Old 04-15-2013, 06:26 AM
      #5  
    Junior Member
     
    Join Date: Jan 2013
    Posts: 269
    Default

    The Janome walking foot doesn't have a claw on the end of the little arm - it's just a straight bar. I also have a Janome and mine is just the straight bar that rests on the needle screw. However, on mine, the arm isn't resting on the head of the screw, it's more on the shank/straight part of the screw. How often are the needles breaking/coming loose? Can you check the tightness of the screw every so often to see how often it comes loose?
    Sephie is offline  
    Old 04-15-2013, 06:32 AM
      #6  
    Power Poster
     
    Join Date: Dec 2010
    Location: Michigan
    Posts: 11,276
    Default

    Till you figure it out, you could try and tighten the screw every so often, like after every so many blocks, or every 15 minutes. Not ideal, but you can finish your top.

    The other thing that can make the needle snap is if your thread gets caught somewhere on the machine, so if it breaks again, make sure that it was threaded properly.

    I've never heard of a walking foot that doesn't have a fork or prong that goes over or around the needle screw. If you have a generic one, however, I would invest in the brand name one for your machine.
    PaperPrincess is offline  
    Old 04-15-2013, 07:28 AM
      #7  
    Member
    Thread Starter
     
    Join Date: Apr 2013
    Posts: 3
    Default

    Ooh... thanks for the replies.
    It is a bar, I suppose, as Sephie described, that rests on the shank part of the needle screw. (Who knew sewing was so technical?). What I read was that vibrations from the walking foot can jiggle the screw loose, iyswim. I did resort to tightening the screw regularly, but that didn't sort it either.

    Purpose of that little arm/bar thingie seems to be something to do with keeping the feet mostly down.

    I only finished the last quilt by winding stitches by hand. No breaks doing that. Or when using other feet. But it wears my hands out to quilt turning the knob by hand, can't do that for whole thing. Needle seems to break because of hitting something metal, the stitch plate or maybe the foot itself. Could be I'm pulling a bit without realising (?).

    I could be fitting foot wrong but it's pretty simple, only one way it could possibly go on.

    6 or 7 breakages in total, in fairly rapid succession (so anywhere between 5 to 25 minutes use each). Since then I've done a load of other sewing without any breaks (patchwork). The needles are good ones (expensive to break!). I had breakages with all kinds of thread, but not with my other feet no matter which thread, only the walking one.

    I'm scared enough to consider asking some else to quilt it for me, darnit.
    Julii is offline  
    Old 04-15-2013, 08:00 AM
      #8  
    Super Member
     
    Join Date: Nov 2011
    Location: Tn
    Posts: 9,013
    Default

    I use that foot. There is a little screw under the plastic cover that works loose every so often. If you can pop that cover off and tighten the screw, that may help. When it gets loose, the foot slips out of place and the needle hits it.
    cjsews is offline  
    Old 04-15-2013, 08:26 AM
      #9  
    Power Poster
     
    nativetexan's Avatar
     
    Join Date: Feb 2009
    Location: home again, after 27 yrs!
    Posts: 19,388
    Default

    I'd take the foot and machine to the repair man and tell him what is happening. broken needles can damage your machine. so you must find out why.
    nativetexan is offline  
    Old 04-15-2013, 08:30 AM
      #10  
    Super Member
     
    Join Date: May 2007
    Location: NE Pa.
    Posts: 1,738
    Default

    I have three Janomes and all of the walking feet just have a bar that goes over the screw for the needle. No claw on them. Never had a problem. I agree with nativetexan, probably repair person should look at your problem..
    mic-pa is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    Sewnoma
    For Vintage & Antique Machine Enthusiasts
    10
    08-13-2015 05:23 AM
    fabricluvr
    Pictures
    18
    01-09-2008 03:00 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter