Need pattern instructions for strata? quilt
02-05-2011, 04:00 PM
#1
Junior Member
Thread Starter
Join Date: Dec 2010
Location: Greenville, SC
Posts: 113
I took a photo of this quilt I saw at a quilt show in Hendersonville, NC, last Fall and I just can't get the idea out of my head! On the attached tag the creator of the quilt stated that she had been inspired by a quilt magazine article on "strata quilts." I have been unable to find anything similar with my on-line searches. It almost looks to me like the quilt is done with some sort of curved paper piecing.
Any help out there? I'm envisioning an underwater scene with waves and fish . . . I already have all of the fabric . . . just no pattern and no idea how to begin!
Any help out there? I'm envisioning an underwater scene with waves and fish . . . I already have all of the fabric . . . just no pattern and no idea how to begin!
02-05-2011, 04:05 PM
#2
Power Poster
Join Date: Jul 2007
Location: Out searching for some sunshine :-)
Posts: 58,856
Strata means strips sewn together. Then there are various ways of cutting them out, to vary the blocks or cut them all out the same. :D:D:D
Stratas is sometimes also called strip sets :wink:
Stratas is sometimes also called strip sets :wink:
02-05-2011, 04:17 PM
#3
Power Poster
Join Date: Feb 2010
Location: Louisiana
Posts: 12,166
02-05-2011, 05:20 PM
#4
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
I don't think this is a typical strata quilt because the squares do not have repetitive fabric sequences in them. Here's how I would go about re-creating it.
Start with a large rectangle of freezer paper. Draw wavy lines going in the same direction, using a permanent marker. Make registration marks along each line, so you can match up the pieces later. Label each piece in order A, B, C, D, etc.
Cut the freezer paper along your wavy lines.
Iron the wavy freezer paper pieces to your fabric of choice. Cut the fabrics 1/4-inch to 1/2-inch away from the edge of the freezer paper.
Piece the strips back together. This is when the strip labels and registration marks will help you line them up. At this step, you have to decide on your piecing technique.
What I would probably do is machine applique a la Harriet Hargrave, using glue to turn under the edge on one strip and appliqueing it on top of the seam allowance of the previous strip. (This is where it would be helpful to have 1/2-inch seam allowance on the non-turned under strip, although not strictly necessary.)
Alternatively, you can piece as usual, pinning the strips together, using the freezer paper edges to help with accuracy, snipping as necessary so curves fit each other. I think this would be harder to do; however, might not be that hard as long as your waves are kept fairly shallow. With deep waves, you might have to piece in sections from first one side and then the other (because of the difficulty matching concave and convex curves).
Once the wavy strata has been created, cut your squares out. These would be cut "on-point" (on the diagonal of the strata), and you would place your square template at different places all over the strata so that each square will be different. You would then remove the freezer paper before sewing the squares together.
You might need to create several different strata to get all of the squares you want.
Start with a large rectangle of freezer paper. Draw wavy lines going in the same direction, using a permanent marker. Make registration marks along each line, so you can match up the pieces later. Label each piece in order A, B, C, D, etc.
Cut the freezer paper along your wavy lines.
Iron the wavy freezer paper pieces to your fabric of choice. Cut the fabrics 1/4-inch to 1/2-inch away from the edge of the freezer paper.
Piece the strips back together. This is when the strip labels and registration marks will help you line them up. At this step, you have to decide on your piecing technique.
What I would probably do is machine applique a la Harriet Hargrave, using glue to turn under the edge on one strip and appliqueing it on top of the seam allowance of the previous strip. (This is where it would be helpful to have 1/2-inch seam allowance on the non-turned under strip, although not strictly necessary.)
Alternatively, you can piece as usual, pinning the strips together, using the freezer paper edges to help with accuracy, snipping as necessary so curves fit each other. I think this would be harder to do; however, might not be that hard as long as your waves are kept fairly shallow. With deep waves, you might have to piece in sections from first one side and then the other (because of the difficulty matching concave and convex curves).
Once the wavy strata has been created, cut your squares out. These would be cut "on-point" (on the diagonal of the strata), and you would place your square template at different places all over the strata so that each square will be different. You would then remove the freezer paper before sewing the squares together.
You might need to create several different strata to get all of the squares you want.
02-05-2011, 05:26 PM
#5
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Hmmmm. There's a similar alternative method that might be more likely. The maker could have started with freezer paper squares the size of the finished squares, marked the wavy lines & registration marks & labels on the square, then proceeded to sew each square as described in my previous post. In other words, she could have used the same technique on each individual square. I actually think this is more likely because it accounts for the non-repetition of fabric order in each square.
02-05-2011, 05:30 PM
#6
Super Member
Join Date: Apr 2010
Location: MS
Posts: 3,434
Originally Posted by Prism99
Hmmmm. There's a similar alternative method that might be more likely. The maker could have started with freezer paper squares the size of the finished squares, marked the wavy lines & registration marks & labels on the square, then proceeded to sew each square as described in my previous post. In other words, she could have used the same technique on each individual square. I actually think this is more likely because it accounts for the non-repetition of fabric order in each square.
02-05-2011, 06:24 PM
#7
Super Member
Join Date: Aug 2010
Location: Westminster, Co
Posts: 2,675
http://www.amazon.com/s/ref=nb_sb_no...ilts&x=21&y=25
I think this is different then already posted.
I think this is different then already posted.
02-06-2011, 07:40 AM
#8
Junior Member
Thread Starter
Join Date: Dec 2010
Location: Greenville, SC
Posts: 113
Looking at your responses, I guess my original question could have simply been, "Is there a way to do wavy strata quilts?"
Prism99, thank you for your detailed response! It sounds doable, but OMG the work and time! I also thought along the lines of making large, curvy, strata panels and then cutting the squares out on-pointe, but was just hoping for an easier way. I'm afraid doing it block-by-block might end up looking too "planned."
Hmmmm . . . . think I need to take some long strips of scrap fabric and start playing . . . I'm guessing not much house-cleaning will get done today!
Prism99, thank you for your detailed response! It sounds doable, but OMG the work and time! I also thought along the lines of making large, curvy, strata panels and then cutting the squares out on-pointe, but was just hoping for an easier way. I'm afraid doing it block-by-block might end up looking too "planned."
Hmmmm . . . . think I need to take some long strips of scrap fabric and start playing . . . I'm guessing not much house-cleaning will get done today!
02-06-2011, 07:47 AM
#9
Senior Member
Join Date: Feb 2010
Posts: 611
I've been playing a bit with freeform strata. They are cut with a rotary cutter, the edge is ironed under and then topstitched to the next layer. No freezer paper involved, no tricky curve piecing. Very simple and fun, and so freeing to let go of precision!
The book that inspired me is Karen Eckmeyer's Layered Waves. http://www.amazon.com/Layered-Waves-...7007156&sr=8-1
Edit: forgot to say, Karen works with either FQs or full-width lengths of fabric. FQ lengths are easier to handle than full widths (fit on the cutting mat and all that...). The full widths are worth it when you want really looong waves on your quilt; probably not so much for cutting the strata into squares.
Hope this helps, and I'd love if you post pics! :D
The book that inspired me is Karen Eckmeyer's Layered Waves. http://www.amazon.com/Layered-Waves-...7007156&sr=8-1
Edit: forgot to say, Karen works with either FQs or full-width lengths of fabric. FQ lengths are easier to handle than full widths (fit on the cutting mat and all that...). The full widths are worth it when you want really looong waves on your quilt; probably not so much for cutting the strata into squares.
Hope this helps, and I'd love if you post pics! :D
02-12-2011, 07:13 AM
#10
Junior Member
Thread Starter
Join Date: Dec 2010
Location: Greenville, SC
Posts: 113
Originally Posted by salmonsweet
I've been playing a bit with freeform strata. They are cut with a rotary cutter, the edge is ironed under and then topstitched to the next layer. No freezer paper involved, no tricky curve piecing. Very simple and fun, and so freeing to let go of precision!
The book that inspired me is Karen Eckmeyer's Layered Waves. http://www.amazon.com/Layered-Waves-...7007156&sr=8-1
Edit: forgot to say, Karen works with either FQs or full-width lengths of fabric. FQ lengths are easier to handle than full widths (fit on the cutting mat and all that...). The full widths are worth it when you want really looong waves on your quilt; probably not so much for cutting the strata into squares.
Hope this helps, and I'd love if you post pics! :D
The book that inspired me is Karen Eckmeyer's Layered Waves. http://www.amazon.com/Layered-Waves-...7007156&sr=8-1
Edit: forgot to say, Karen works with either FQs or full-width lengths of fabric. FQ lengths are easier to handle than full widths (fit on the cutting mat and all that...). The full widths are worth it when you want really looong waves on your quilt; probably not so much for cutting the strata into squares.
Hope this helps, and I'd love if you post pics! :D
Thread
Thread Starter
Forum
Replies
Last Post
