Sometimes I have had trouble with bird nests on the bottom if my top tension is too loose, I can go for a while then just like you have a nest here and there and have to re-thread...so I tightened my top tension until I could just see a tiny peep of the bobbin thread come to my top. I use a 16/100 topstitch needle, I know it seems huge but I had trouble with thread fraying and snapping on me when I used a smaller needle eye. Best of luck!
|
My machine does not like C&C. I switched to Aurifil and works just fine.
|
I, too, am new at FMQ. On my practice pieces, I have been writing on the piece all of the information: Needle size and type, thread, machine settings etc. That way I have a better idea of what works and what doesn't as I am learning. Good luck.
|
I just ordered some Aurifil thread, also I ma noticng that as the Bobbin is unwinding un even when i pull it out to re-thread it, it is thicker on the bottom than the top. how do i get it to wind and or unwind evenly. any suggestions?
|
I GOT it to work! I am one happy camper yahoo!!!!! Well it seems that my machine does not like coats and Clark 30 weight cotton thread, I switched to a 50 weight from connecting threads, and put in a bobbin washer, and I have not had any hic-ups oh and my stitch length is at .05 I had it at zero but when this is working I do not dare change any thing more, lol thank you everyone for all the help.
|
I read all the way through this thread and am so happy that you found the solution! Yayyyy!!
|
I have just had a similar problem tried everything. But then realised it was my top thread jumpingoutof the first and second places as you thread and missing the first discs at top of machine. I was just putting these back not thinking they were causing the problem. Keep going and good luck.
|
All times are GMT -8. The time now is 04:43 PM. |