Problem with quilt sandwich bunching HELP HELP HELP
#1
Super Member
Thread Starter
Join Date: Oct 2011
Location: Timmins, Ont. Canada
Posts: 4,683
Problem with quilt sandwich bunching HELP HELP HELP
After 2 attempts to stitch in the ditch my top fabric seems ok but my backing fabric ends up in bunches as I finish a line of sewing. I have removed the sewing - re pinned twice and it is still happening. As I near the bottom of my quilt it ends up looking like a swag curtain (hopefully you will get my drift). Could it be a problem with my machine tension or is the backing fabric perhaps not up to snuff. It does not quite feel the same quality as the top but when I bought it the bolt said it was quilting fabric. Please I need some help!!!!!!!
callen
Canada
callen
Canada
#3
Are you using a walking foot?? How closely have you pinned? I spray baste and find that that works for me. The walking foot also makes a huge difference. I also try and keep my quilt sandwich nice and straight as I am stitching.
I hope you can solve your problem, it's so frustrating when it just doesn't work
I hope you can solve your problem, it's so frustrating when it just doesn't work
#4
Super Member
Thread Starter
Join Date: Oct 2011
Location: Timmins, Ont. Canada
Posts: 4,683
Tks so much for your quick response. I am using a stitch regulator & I have changed the size of stitch to a 3 but still no success. My pins are about every 3-4 inches apart. I never thought about spray basting, that just might do the trick. I still think there might be a problem with the backing fabric but am not sure. Has anyone else run into this problem with the backing?? I took some scraps (of the same fabric, batting & backing) & they were fine when I sewed them so this really has me stumped. I have only been quilting for 1 1/2 years so I don't have a lot of experience so I would appreciate any help available.
#5
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
If you take the sandwich apart, I would also heavily starch the backing fabric before layering. I use a 1:1 solution of Sta-Flo and water. This will stabilize the backing fabric so it doesn't stretch and distort as you quilt. I would also spray starch the top as heavily as possible.
Also, if your machine has a means of regulating the presser foot pressure, you may want to try lightening up on that. Your machine's pressure is probably set for sewing two layers of fabric together; with a batting in there, it may be heavier than you need. That would also create "drag" on the quilt layers and perhaps stretch the fabrics.
Oh, and spray basting is a good idea too. I have never had a problem using 505 with a starched backing fabric.
Also, if your machine has a means of regulating the presser foot pressure, you may want to try lightening up on that. Your machine's pressure is probably set for sewing two layers of fabric together; with a batting in there, it may be heavier than you need. That would also create "drag" on the quilt layers and perhaps stretch the fabrics.
Oh, and spray basting is a good idea too. I have never had a problem using 505 with a starched backing fabric.
#6
What kind of batting are you using?
Are you quilting on a domestic or a long arm? (I'm guessing domestic)
Are your feed dogs up or down? If your using a walking foot on the top and your feed dogs are down - this could be your problem.
Are you quilting on a domestic or a long arm? (I'm guessing domestic)
Are your feed dogs up or down? If your using a walking foot on the top and your feed dogs are down - this could be your problem.
#10
This used to happen to me too. Now I use basting glue/spray and make sure both the front and back are smooth. If you don't want to use spray I tape the backing down to my tile floor and then heavily pin....
Thread
Thread Starter
Forum
Replies
Last Post
pennyswings
Pictures
18
05-26-2009 01:25 PM