Go Back  Quiltingboard Forums >
  • Main
  • free motion quilting >
  • free motion quilting

  • free motion quilting

    Thread Tools
     
    Old 01-25-2010, 03:27 PM
      #1  
    Senior Member
    Thread Starter
     
    starlite's Avatar
     
    Join Date: Oct 2009
    Location: Charlotte, Michigan
    Posts: 420
    Default

    I have a singer confidence quilting machine and need to know how to adjust the tension because I'm getting loops on the bottom. No place in the manual does it explain free motion quilting. Thanks Janet
    starlite is offline  
    Old 01-25-2010, 03:31 PM
      #2  
    Super Member
     
    Mamagus's Avatar
     
    Join Date: Dec 2007
    Location: Newfoundland Canada
    Posts: 1,695
    Default

    Ramp up the tension on the top thread. That's what works for me.
    Mamagus is offline  
    Old 01-25-2010, 04:54 PM
      #3  
    Senior Member
    Thread Starter
     
    starlite's Avatar
     
    Join Date: Oct 2009
    Location: Charlotte, Michigan
    Posts: 420
    Default

    should I be using a special foot also I still get loops
    starlite is offline  
    Old 01-25-2010, 04:59 PM
      #4  
    Super Member
     
    Mamagus's Avatar
     
    Join Date: Dec 2007
    Location: Newfoundland Canada
    Posts: 1,695
    Default

    There is a special foot called a darning foot or freemotion quilting foot. There is a spring on the shank of the foot. You have to either cover the feed dogs or drop them.
    Mamagus is offline  
    Old 01-25-2010, 06:26 PM
      #5  
    Power Poster
     
    Join Date: Mar 2009
    Posts: 15,639
    Default

    I had a rats nest with my Pfaff under my backing the other day and found out that the needle lifter had to be pushed into a specific position. Don't know if the Singer has some requirements like that.
    MadQuilter is offline  
    Old 01-25-2010, 07:23 PM
      #6  
    Senior Member
    Thread Starter
     
    starlite's Avatar
     
    Join Date: Oct 2009
    Location: Charlotte, Michigan
    Posts: 420
    Default

    The problem is that the owners manual does not tell me what to do for free motion quilting and being I'm new to this I have no idea where to start. I keep getting loops on the underside of the material. Any help for this newbe would be great.
    starlite is offline  
    Old 01-25-2010, 08:01 PM
      #7  
    Power Poster
     
    Join Date: Dec 2008
    Location: Western Wisconsin
    Posts: 12,930
    Default

    For free motion, you need a foot that "hops". This is usually a darning foot. You don't actually need to drop the feed dogs for free motion; some quilters find it easier to move the fabric if they leave the feed dogs up.

    If you haven't already, take all the thread out and re-thread the machine. Make sure the presser foot is up when you do this; otherwise the thread may not seat correctly in the upper tension discs.

    Does the machine make good stitches when you change back from free motion to regular stitching?
    Prism99 is offline  
    Old 01-25-2010, 08:17 PM
      #8  
    Senior Member
    Thread Starter
     
    starlite's Avatar
     
    Join Date: Oct 2009
    Location: Charlotte, Michigan
    Posts: 420
    Default

    yes it sews just fine after I try free motion. I thought I had to leave the pressure foot up to free motion.
    starlite is offline  
    Old 01-26-2010, 05:24 AM
      #9  
    Power Poster
     
    Jingle's Avatar
     
    Join Date: Dec 2009
    Location: Outside St. Louis
    Posts: 38,224
    Default

    I have a Juki TL98E, I use a darning foot, Lower the feed dogs, set stitch length to 0, raise pressure on pressure foot, set upper tension to 1 and go to town. I wear garden gloves W/ rubber nubs on them, makes moving quilt easier. I start out with a practice quilt sandwich to make sure everything is working right and looking right. This works for me, I hope it helps you out. Make little adjustments to the tension setting until it looks the way you want it to. Always practice on a quilt sandwich to make sure all is well. I hope this helps you. :D :D :D
    Jingle is offline  
    Old 01-26-2010, 05:29 AM
      #10  
    Super Member
     
    Join Date: Oct 2009
    Posts: 5,453
    Default

    Originally Posted by Jingleberry
    I have a Juki TL98E, I use a darning foot, Lower the feed dogs, set stitch length to 0, raise pressure on pressure foot, set upper tension to 1 and go to town. I wear garden gloves W/ rubber nubs on them, makes moving quilt easier. I start out with a practice quilt sandwich to make sure everything is working right and looking right. This works for me, I hope it helps you out. Make little adjustments to the tension setting until it looks the way you want it to. Always practice on a quilt sandwich to make sure all is well. I hope this helps you. :D :D :D
    great answer !
    watterstide is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    Roberta
    Links and Resources
    22
    06-14-2015 10:06 AM
    cminor
    Main
    42
    12-29-2013 11:47 PM
    neeng
    Links and Resources
    20
    03-03-2013 01:43 PM
    BellaBoo
    Recipes
    20
    06-09-2012 07:55 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter