Go Back  Quiltingboard Forums > Main
Hexgons- how to sew them >

Hexgons- how to sew them

Hexgons- how to sew them

Old 02-23-2013, 07:59 AM
  #1  
Member
Thread Starter
 
Join Date: Nov 2011
Posts: 3
Default Hexgons- how to sew them

I have brought pre-cut hexies by Robert Kaufman. There are 42 of them. I can piece the hexies out to how I want them for a table topper. How do you sew them together so they lay flat? Is it in one row? then sew them to that row?

have tried to sew them by machine but no luck. What is the secert?
Thanks
Sarah
51 and quilting is offline  
Old 02-23-2013, 08:10 AM
  #2  
Super Member
 
0tis's Avatar
 
Join Date: Mar 2010
Location: Northern California
Posts: 2,644
Default

I am new to them too - I just purchased a hex quilt kit from Tula Pink collection - I am going about it the old fashioned way - english paper piecing- my first time - never thought I would hand piece - but it's a nice to-go project. I believe you have to mark the quarter inch around the perimeter of the hexagon - then start sewing 1/4" before the edge and stop 1/4" before the end. As for how to go about it - I would just trial and error it - just see how it goes. I am curious as to the reponses you get because I need to know also.
0tis is offline  
Old 02-23-2013, 08:24 AM
  #3  
Super Member
 
Luv Quilts and Cats's Avatar
 
Join Date: May 2010
Location: New Hampshire
Posts: 3,699
Default

You could check out directions on line for Grandmother's Garden Quilt. It's one of my favorite quilt patterns and on my bucket list. I have bought plastic hexagon templates to make my hexagons with using reproduction 20's and 30's fabrics. To use the plastic templates, you draw around them adding a 1/4 inch seam (I have bought pencils that are 1/4 inch apart in a plastic holder from Keepsake Quilting just for this). You run basting stitch around the piece, pull it in over the plastic template and iron. Voila you have your hexagon. I am planning to hand sew them together with a whip stitch and use it as a take along project. I hope this gives you some ideas. I am sure others will have more ideas too! Have some fun with it!
Luv Quilts and Cats is offline  
Old 02-23-2013, 08:27 AM
  #4  
Member
Thread Starter
 
Join Date: Nov 2011
Posts: 3
Default

Thanks I see that Moda is also comming out with pre-cut Hexies. But they do not tell you how to put them together.Shouldn't they at least tell you how to do it?
51 and quilting is offline  
Old 02-23-2013, 08:30 AM
  #5  
Super Member
 
Luv Quilts and Cats's Avatar
 
Join Date: May 2010
Location: New Hampshire
Posts: 3,699
Default

Check their web site, they may have a pattern and it might be free.
Luv Quilts and Cats is offline  
Old 02-23-2013, 08:35 AM
  #6  
Super Member
 
humbird's Avatar
 
Join Date: Mar 2008
Posts: 1,281
Default

I'm sure they could be machine pieced, but have never done it that way, so no advise there. I am on my 3rd hexagon quilt, (GFG) and use "english paper piecing" method. I use paper hexagon to stitch the fabric to, (print and cut my own) then whip stitch them together. Do a search for EPP and you will get lots of hits. I have to tell you, it is very addictive! At least it is for me. I'm already planning my 4th. Good luck with how ever you do it.
humbird is offline  
Old 02-23-2013, 08:40 AM
  #7  
Super Member
 
charsuewilson's Avatar
 
Join Date: Jan 2013
Location: Virginia
Posts: 1,203
Default

There's English Paper Piecing - make hexagons the finished size out of freezer paper and iron them to the wrong side of the fabric hexagons. Iron edges over the freezer paper and hand-sew. I had trouble with this using 1/2" hexagons. I ended up just using the hexagons as a guide for where to sew.

So, that leaves another option - use the freezer paper as a guide as to where to sew. Or use a plastic template to mark the sewing line on the wrong side of the fabric.

The most important part is to start and stop sewing 1/4" from the edges of the hexagon. And to stay on the sewing line.
charsuewilson is offline  
Old 02-23-2013, 08:48 AM
  #8  
Super Member
 
ArtsyOne's Avatar
 
Join Date: Sep 2011
Location: Canadian in Minnesota
Posts: 3,078
Default

I'm too impatient to mark all of the hexagons, and sew them together using my machine and a 1/4" foot in addition to a 1/4" mark going crosswise in front of the needle. Put two hexagon edges right sides together. Start 1/4" from the beginning of that edge (it's probably 2" or 3" depending on the size of the hexagon), sew a 1/4" seam and stop 1/4" from the end. That's why you need the crosswise mark on your machine plate. Open up the two hexagons that you have sewn together and press. They'll be joined along a short edge. Take a point of a third hexagon and you will see how it fits between the edges of the two you have already sewn. Now you have two edges to sew together with a "Y" seam. As long as you start and stop 1/4" from the end of each seam you'll be just fine. Press again. Pretty soon you'll have a bunch sewn together!
ArtsyOne is offline  
Old 02-23-2013, 09:38 AM
  #9  
Super Member
 
EasyPeezy's Avatar
 
Join Date: Mar 2010
Location: Canada
Posts: 3,446
Default

Moda did indeed have a tutorial on how to sew those pre-cut hexagons. Here it is.

http://www.modabakeshop.com/2013/02/...mbs-quilt.html
EasyPeezy is offline  
Old 02-23-2013, 09:44 AM
  #10  
Super Member
 
Join Date: Aug 2009
Location: The middle of an IL cornfield
Posts: 7,014
Default

There is a YouTube video on machine piecing hexagons.
Lisa_wanna_b_quilter is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Vicki1212
Main
86
04-08-2015 10:25 PM
JanTx
Main
48
07-05-2013 04:40 PM
KathyAire
General Chit-Chat (non-quilting talk)
7
09-03-2010 10:40 AM
craftybear
Links and Resources
2
05-16-2010 05:53 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter