Starching cut pieces?
#12
I have never starched fabric when making a quilt top. I honestly did not know about that trick until I joined this board and have yet to try it. I understand it can help if you have diagonal cuts. I always wash my fabrics to remove the sizing, before cutting, because I prefer working with soft, pliable cloth.
But I have found that if you are sewing a diagonal cut to a straight cut, put the diagonal on the bottom and it will not stretch as much.
But I have found that if you are sewing a diagonal cut to a straight cut, put the diagonal on the bottom and it will not stretch as much.
#13
Aaah Be Careful ! On my first quilt I ran into trouble with half square triangles and it was suggested I try starch - so I did. But I used spray starch on unwashed fabric and proceeded to either shrink or distort the squares. Of course being so new I didn't notice until I had sewn the whole thing together and everything came out wonky. I ended up unpicking the entire quilt and recutting all the pieces a half inch smaller to make uniform sizes and then reassembling the now-smaller quilt. It all turned out okay in the end - but there was a lot of heart ache along the way.
By the way - the trouble I was having with half square triangles ? I have since figured out that if I had just pressed the seams before pressing open most of my troubles would have gone away. Ah experience - she is cruelly won sometimes.
By the way - the trouble I was having with half square triangles ? I have since figured out that if I had just pressed the seams before pressing open most of my troubles would have gone away. Ah experience - she is cruelly won sometimes.
#15
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Also, half square triangles are one of the worst cuts in terms of distortion problems. Shrinkage of 1/32" might not show up in cuts of 5" squares when put together, but that same shrinkage in cuts of small half-square triangles could well be disastrous.
#16
If I forget to starch before I cut, I generally will spray starch the pieces and let them dry all the way before I press. I can never get it right if I press while the fabric is damp/wet--it either shrivels up or stretches out--operator error?probably--but letting it dry cuts down on my catastrophes.
#17
#18
Member
Join Date: Feb 2012
Location: Kentucky
Posts: 37
Sounds like starching is a good thing with the preference being when you starch is what works best for you. This is really great info for a beginner. Especially on the stretching of the fabric. I am so glad to hear about so many ways to do things from people who are experienced. Maybe I will learn and won't make the same mistakes. At least it will give me different ways to do something so I can see what is best and easiest for me.
#19
Member
Join Date: Feb 2012
Posts: 30
Read on a few posts on these forums that jelly rolls can stretch when sewing (know I have had some of my own 2 1/2 cut stops start raveling a lot eve n if I set them aside someplace where I want them to not gt touched a lot--and I use quality quilting fabric from quilt stores). Want to find that post to ask if she starches purchased jelly roll strips before sewing. Do know I need to see strips in opposite directions when sewing complete strips full length. Anyone here starch purchased jelly roll strips?
#20
Member
Join Date: Feb 2012
Posts: 30
Been wanting to cut lots of strips fro my scraps and some fabric I want to use in donated quilts that may be 1 yard lengths or so with my new AccuQuilt to have on hand for future scrap quilts. Took some 1/2 yard pieces and placed on a laundry dryer where I could place the fabrics over the wires to dry after spraying so I could do several pieces outside t a time and let them air dry since our weather has been clear and nice (Alameda, CA) the past few days. Does anyone see a problem with starching my fabrics this way instead of pacing the fabric flat on ironing board and letting dry thre? Ironing board not that big so would take a while to starch 1 yard pieces t a time and want to cut several at a time since but cutter can do 6 layers of fabric in one swipe. Once they have dried I press,then cut down to needed widths for accuquilt die pass through. Does anyone see a problem with fabric hanging to dry (like we used to do with sheets, etc per dryer days) versus laying flat? Otherwise would need to lay on a tarp on lawn then possible flip sides over! Trying to make myself some "kits" so when I want to sew without a planned quilt in mid I can just grab some precut strips and quickly get some charity strips sewn. Next ? will be best way to store. I think starching helps stop fraying when strips are of looser woven fabric too. These strips are all quilt store quality fabric but some seem to fray quicker than others due to how tightly they were woven by manufacturer, etc. Like making strips of my scrap batiks as they are made from Pima cotton I think or cotton has a much tighter weave then printed type usually. Sorry for long post!
Thread
Thread Starter
Forum
Replies
Last Post