stitching block pieces together
#1
Member
Thread Starter
Join Date: Jan 2007
Location: Indiana
Posts: 2
Hi all, I am new to quilting and have been hand quilting thus far. I would like to use my sewing maching on my next quilt. I am unclear as to how you handle the start and end of the stitching when assembling the blocks. Do you backstitch at each end, or leave the stitching open? Would appreciate any help. Christine
#2
Hi! Good question! I've always thought if there was a chance the blocks could pull apart, go ahead and use a bit of backstitch. When you're assembling the blocks into rows, the rows will lock the stitches into place as you sew along those lengths. Hope this sounds clear to you :D
#4
I had been told when first starting not to back stitch, because of old frog, ribbit ribbit, but found when putting my blocks together sometimes seams would come apart and then you have a problem. So have really paid attention to what others said. One lady on Alex Anderson said to make first two or three stitches smaller and stops that, another said to back stitch two or three. But if you are chain stitching, to back stitch at beginning and end of block can be daunting. I like the idea of leaving thread longer, that might work and I am going to try that, thank you. But to me whatever works is best. I found that if you do have to rip it out two or three stitches that are back stitched do not cause a problem. My problem is remembering to back stitch beginning and end of block. I found whatever you start out with and it becomes a habit is hard to break, if I had started out back stitching, I may not have a forgetful problem ha ha. Hope this helps you..
Rita
Rita
#5
Great suggestions! The chain piecing problem never dawned on me, I guess I assumed we were connecting blocks and rows. I have heard that anywhere lines of stitching cross they would lock. I think the extra thread "tails" Joy suggested would solve the chain piecing problem rather than all that tacking or changing stitch lengths. Sure would be easier to snip the tails!
#7
When chain sewing, I do not backstitch. By decreasing the stitch size you will not have stitches coming apart. I usually use a 1.5-2 stitch length. When taking the pieces to be pressed open, I also steam set the stitches before opening. The only time I backstitch is when putting rows of blocks together.
#8
Super Member
Join Date: Aug 2007
Location: s.cal
Posts: 2,039
anchor using a piece of small fabric, frist start your stitching on a small piece of fabric this is called archoring stitch till you,re about to come close to the end of your archoring fabic but up your block and contuine stitching ,but up again and this is called chain stitching .when you finsh sewing your last block put your archor fabric and your ready to start again nellie :D
#9
Super Member
Join Date: Jul 2007
Location: Minnesota
Posts: 1,097
Originally Posted by Boo
When chain sewing, I do not backstitch. By decreasing the stitch size you will not have stitches coming apart. I usually use a 1.5-2 stitch length. When taking the pieces to be pressed open, I also steam set the stitches before opening. The only time I backstitch is when putting rows of blocks together.
#10
I started out back stitching because of the type of sewing that I did before learning to quilt. I did find that if you do not stay perfectly on the seam line, the little variations can make your block wonky. I too found that if I leave my threads 1/2 inch long my seams do not come apart and I also use a 2.0 seam length or even smaller when paper piecing.
Thread
Thread Starter
Forum
Replies
Last Post
New Kris
Offline Events, Announcements, Discussions
3
06-06-2011 06:30 PM