Go Back  Quiltingboard Forums >
  • Main
  • My first OBW and I'm STUCK! >
  • My first OBW and I'm STUCK!

  • My first OBW and I'm STUCK!

    Thread Tools
     
    Old 04-15-2011, 06:11 PM
      #1  
    Super Member
    Thread Starter
     
    jillaine's Avatar
     
    Join Date: Feb 2011
    Location: California Girl exiled in DC
    Posts: 1,337
    Default

    Apologies for photo quality. My blackberry's camera leaves MUCH to be desired.

    I picked up this fabric the other day, wanting to try a OBW/Kaleidoscope. I'm doing a hexagon.

    I've read tutorials, I've watched youtube videos. I get what I need to do ONCE I decide where to cut. I just can't figure out where to cut, and if to cut selvage to selvage, or the other direction. I see where the repeat is-- and there are 12" between repeats. So I THINK I cut a 12" width even though I want to end up with 4.5" strips? Huh?

    So I'm staring at this fabric and not quite knowing how to decide where to cut, which direction? how many inches. horiz? vertical?

    I'm stuck!!!! help !!!
    Attached Thumbnails attachment-184827.jpe  
    jillaine is offline  
    Old 04-15-2011, 06:34 PM
      #2  
    Power Poster
     
    amma's Avatar
     
    Join Date: Jul 2007
    Location: Out searching for some sunshine :-)
    Posts: 58,856
    Default

    Some of us cut the fabric in half lengthwise first. It is easier to handle the shorter pieces :wink:
    Then we made the cuts on the repeats across the width of the fabric.
    Yes, start at one repeat, and cut across in the same place on all of the other repeats too.
    I love your fabric :D:D:D
    amma is offline  
    Old 04-15-2011, 06:35 PM
      #3  
    Super Member
    Thread Starter
     
    jillaine's Avatar
     
    Join Date: Feb 2011
    Location: California Girl exiled in DC
    Posts: 1,337
    Default

    And why would I use that strip method (where you flip the triangle template along a 4.5" strip?) instead of fussy-cutting the sections of the fabric I want to form the triangles? (Other than wasting a ton of fabric?)
    jillaine is offline  
    Old 04-15-2011, 06:37 PM
      #4  
    Power Poster
     
    amma's Avatar
     
    Join Date: Jul 2007
    Location: Out searching for some sunshine :-)
    Posts: 58,856
    Default

    It is a lot less cutting this way. Once you cut the strips and line them up, cutting the triangles goes quickly.

    Fussy cutting all of the pieces is time consuming, and you also need to make sure all of your cuts are identical :D:D:D

    Once you cut your strips into repeats, then you can decide what widths to sub cut them into.
    amma is offline  
    Old 04-15-2011, 07:15 PM
      #5  
    Super Member
    Thread Starter
     
    jillaine's Avatar
     
    Join Date: Feb 2011
    Location: California Girl exiled in DC
    Posts: 1,337
    Default

    Amma,
    Thanks for your support.
    But please answer this: when you cut strips and cut triangles from the strips, isn't it true that you are giving up all control over where the triangles fall on the fabric?
    jillaine is offline  
    Old 04-15-2011, 07:59 PM
      #6  
    Super Member
     
    spartan quilter's Avatar
     
    Join Date: Feb 2011
    Location: central North Dakota
    Posts: 1,398
    Default

    But the nice thing is, you have 3 choices of how to sew your triangles together. I just finished one, and that was really hard. It took me almost as long to play with each set of 6, determining which point I wanted in the center. But it is worth it in the end. Have fun cutting.:)

    Originally Posted by jillaine
    Amma,
    Thanks for your support.
    But please answer this: when you cut strips and cut triangles from the strips, isn't it true that you are giving up all control over where the triangles fall on the fabric?
    :thumbup:
    spartan quilter is offline  
    Old 04-15-2011, 09:57 PM
      #7  
    Super Member
     
    Join Date: Mar 2010
    Location: Elmira, NY
    Posts: 6,113
    Default

    Instead of fussy cutting, the fabric is stacked matching the pattern one on top of the other, and then cut with the triangles. Then the patterns match. It could be done with strips, too, I guess, just matching up the print in the pattern.
    wolfkitty is offline  
    Old 04-15-2011, 10:35 PM
      #8  
    Super Member
     
    Katrine's Avatar
     
    Join Date: May 2008
    Location: France
    Posts: 1,813
    Default

    I would strongly recommend you get the book One Block Wonders.
    It is all perfectly explained and shown in there, and very easy to follow.
    I've made lots of obws but still refer to the book now and again.
    I've seen others comment that once they had the book they found it easy.
    Katrine is offline  
    Old 04-16-2011, 12:11 AM
      #9  
    Banned
     
    Join Date: May 2009
    Location: Houston, TX
    Posts: 7,286
    Default

    Originally Posted by Katrine
    I would strongly recommend you get the book One Block Wonders.
    It is all perfectly explained and shown in there, and very easy to follow.
    I've made lots of obws but still refer to the book now and again.
    I've seen others comment that once they had the book they found it easy.
    What she said!!!
    gaigai is offline  
    Old 04-16-2011, 05:09 AM
      #10  
    Power Poster
     
    Join Date: Dec 2010
    Location: Michigan
    Posts: 11,276
    Default

    In the book, the author says to put the straight grain of the fabric to the outside of the hexagon blocks. I figured that I knew better and took a lot of time turning the triangles to get the 'prettiest' blocks. Well, I'll be darned if she didn't know what she was talking about! The blocks that had the straight of grain on the outside were easier to work with and you are going to be hard pressed to pick out an individual hexagon when you are done. They will all blend in, so the extra time I took playing with each hex to get it pretty was pretty much wasted. BTW, fussy cutting the hexes is what you would do for a Stack and Whack. In this type of quilt, you fussy cut your blocks then use other fabric (usually solids) to isolate and highlight your kalidescope blocks. Because you are surrounding them with a solid color the individual blocks stand out and so fussy cutting them makes sense.
    PaperPrincess is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    featherweight
    Pictures
    52
    09-23-2011 10:05 AM
    candi
    Pictures
    88
    08-11-2011 12:30 PM
    cat-on-a-mac
    Pictures
    25
    05-31-2011 04:57 AM
    miss_ticky2
    Pictures
    126
    05-30-2011 04:56 PM
    robbijmorris
    Pictures
    16
    05-14-2009 05:35 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter