Tying a quilt
#1
Senior Member
Thread Starter
Join Date: Nov 2006
Posts: 358
Hello, I would like to know how many inches apart do we have to do when we tie a quilt? I worked with a group on a lovely 73 x 84 quilt and it was tied every 5 inches. I thought it might look better without the ties so close together.
Thanks. Regina.
Thanks. Regina.
#3
if i tie a quilt, i do it so the threads dangle on the back, usually 2" or 3" apart. if you use a color thread that coordinates with the front but contrasts with the back, it doubles as decoration on the back.
you can also "tie" a quilt in a way that leaves nothing dangling from the back. instead of tying knots, do several backstitches (like you were sewing on a button), run your needle through the innards, then bring it back up at the next spot to "tie".
you can also "tie" a quilt in a way that leaves nothing dangling from the back. instead of tying knots, do several backstitches (like you were sewing on a button), run your needle through the innards, then bring it back up at the next spot to "tie".
#4
Neat idea!!! Then, if it contrasts, it could be like little polka-dots!!! :D You're a smart cookie, Patrice!!
Or, if you can draw, you could use Pigma pens to draw some flowers around them for more deco... hmmm...
Thanks for the tip!! :D
Or, if you can draw, you could use Pigma pens to draw some flowers around them for more deco... hmmm...
Thanks for the tip!! :D
#5
Junior Member
Join Date: Apr 2007
Location: Ohio
Posts: 145
Originally Posted by PatriceJ
if i tie a quilt, i do it so the threads dangle on the back, usually 2" or 3" apart. if you use a color thread that coordinates with the front but contrasts with the back, it doubles as decoration on the back.
you can also "tie" a quilt in a way that leaves nothing dangling from the back. instead of tying knots, do several backstitches (like you were sewing on a button), run your needle through the innards, then bring it back up at the next spot to "tie".
you can also "tie" a quilt in a way that leaves nothing dangling from the back. instead of tying knots, do several backstitches (like you were sewing on a button), run your needle through the innards, then bring it back up at the next spot to "tie".
#8
Originally Posted by Extreme Quilter
Another hot tip from Patrice. You are really the go-to gal on this site!
but let's not forget all the great ideas we get from many of the other folks here, too. i've lost count of the "AHAH!!! So that's how to do that." moments since i started coming here.
#9
Wow...finally a post that I know I can answer!!
I am a member of a club that gives away quilts for charity. ALL of our quilts are tied. How you tie depends on if you are doing it in a frame (which is easier) or on the floor/lap.
If not using a frame, make sure that it's pin or thread basted very well. A very safe rule of thumb is no matter the thickness of the batting, place a tie on each side of your fist. Make a fist and put it down on your quilt and measure with it. After you've done that for a while you will be able to gauge if your fist is too big or too small. Sometimes what I do is use the fist plus an inch or so on each side and go all the way across in a row that way. Then, the next row I put a tie in between the ones I already made but up in the second row. I repeat the alternating ties and then it'll resemble a checkerboard a little bit. It's a nice pattern to use. Sometimes, the quilt top will tell you where to tie. Sometimes you could use the print on a fabric or keep tying in the same pieces of blocks over and over again and make a pattern that way.
Back when I was working, I had an understanding employer that would let us do whatever word searches, crafts etc at our desks. (Telephone operator). I would make sure the quilt was pin basted everywhere that I wanted a tie. Then I took it to work and tied it on my lap. Since it was already pinned so well I didn't need to worry about pulling tight or anything like that and they always turned out nice.
Hope this helps..
Melissa
I am a member of a club that gives away quilts for charity. ALL of our quilts are tied. How you tie depends on if you are doing it in a frame (which is easier) or on the floor/lap.
If not using a frame, make sure that it's pin or thread basted very well. A very safe rule of thumb is no matter the thickness of the batting, place a tie on each side of your fist. Make a fist and put it down on your quilt and measure with it. After you've done that for a while you will be able to gauge if your fist is too big or too small. Sometimes what I do is use the fist plus an inch or so on each side and go all the way across in a row that way. Then, the next row I put a tie in between the ones I already made but up in the second row. I repeat the alternating ties and then it'll resemble a checkerboard a little bit. It's a nice pattern to use. Sometimes, the quilt top will tell you where to tie. Sometimes you could use the print on a fabric or keep tying in the same pieces of blocks over and over again and make a pattern that way.
Back when I was working, I had an understanding employer that would let us do whatever word searches, crafts etc at our desks. (Telephone operator). I would make sure the quilt was pin basted everywhere that I wanted a tie. Then I took it to work and tied it on my lap. Since it was already pinned so well I didn't need to worry about pulling tight or anything like that and they always turned out nice.
Hope this helps..
Melissa
#10
Oh, I forgot...
Embroidery floss works well and so does light weight crochet thread. We use darning needles so the thread fits, but there is such a large variety that you can easily find some that match or contrast depending on what you want it to look like when it's done.
Embroidery floss works well and so does light weight crochet thread. We use darning needles so the thread fits, but there is such a large variety that you can easily find some that match or contrast depending on what you want it to look like when it's done.
Thread
Thread Starter
Forum
Replies
Last Post
Wendys Quilts
Pictures
65
01-28-2014 09:23 AM