The ugliest throw alive!
#1
Senior Member
Thread Starter
Join Date: Jan 2014
Location: Southern Illinois
Posts: 303
The ugliest throw alive!
I have tried my hand at scrappy and failed miserably! I am making a throw that has 20 pieced blocks and 10 one piece blocks. I guess my 1/4 inch seam is not what it should be and most of the pieced blocks are anywhere from and 1/8 to and 1/2 inch small. I don't really want to redo all the blocks because it's going to be less than pretty anyway. Could I take the easy way out and sew them together and then square up the entire quilt? Then I will practice, practice and practice some more on that elusive 1/4 inch seam.
#3
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,538
It depends on the pattern if the pieced blocks could be trimmed or you might cut them to make a new pattern like Disappearing Nine Patch. If you can say what the pattern of the pieced blocks are, someone might be able to offer some hints.
#4
Super Member
Join Date: Oct 2011
Location: dallas tx.
Posts: 5,172
If you don't want to cut the 10 blocks down to the pieced one's size, set them aside and measure the pieced ones, and cut new 10 ones to correct size. You can put sashing around them too or you can do just what you asked and use it the way it turns out. Save it, and you'll be able to see how you are growing in your work. It's fun to see. Don't despair. Keep on.
#5
Power Poster
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
when you have the 20 pieced blocks all made measure them- find the smallest one and trim/square up all the rest to be the same size as that one. then cut your 1-piece blocks that size; that way everything will match when you put it together. before putting it together take a small ruler with a 1/4" mark on it- lower your sewing machine needle and line up the center of the needle with the 1/4" mark on the ruler- then put a piece of masking tape (or a small stack of flag-post it's) along the edge of the ruler- on the sewing machine bed- that will give you a line to follow to keep you stitching a consistent 1/4". if you choose a neutral, white, cream, black or a dominate color in the pieced blocks to use for the solid squares it will tie it all together and make it surprisingly *not ugly* ,,,you might just like it when you get it together. remember to show us some pictures.
#6
Senior Member
Thread Starter
Join Date: Jan 2014
Location: Southern Illinois
Posts: 303
The blocks are a four patch with solid borders on all sides.
#7
Super Member
Join Date: Oct 2013
Location: Centralia, WA, USA
Posts: 4,890
when you have the 20 pieced blocks all made measure them- find the smallest one and trim/square up all the rest to be the same size as that one. then cut your 1-piece blocks that size; that way everything will match when you put it together. before putting it together take a small ruler with a 1/4" mark on it- lower your sewing machine needle and line up the center of the needle with the 1/4" mark on the ruler- then put a piece of masking tape (or a small stack of flag-post it's) along the edge of the ruler- on the sewing machine bed- that will give you a line to follow to keep you stitching a consistent 1/4". if you choose a neutral, white, cream, black or a dominate color in the pieced blocks to use for the solid squares it will tie it all together and make it surprisingly *not ugly* ,,,you might just like it when you get it together. remember to show us some pictures.
Your blocks should come out nicely since they have a solid border on them already.
Rodney
#8
Member
Join Date: Jul 2013
Location: Texas
Posts: 33
I struggled like crazy when I first tried to sew a top with all 5" charms. That 1/4" seam and I were not getting along. So I bought a 1/4"foot that has a guide and it has made all the difference in the world! Amazon was where I bought it.
#10
Member
Join Date: Aug 2011
Posts: 44
The ugliest throw alive
I heard a great way to figure out if you have a 1/4" seam. Stitch together three 1 1/2" strips, then turn it over and put a 1 inch ruler on top of the middle strip. If it goes from seam to seam exactly, then you have the correct 1/4" seam. If not, do it again lining up where it should be until you come up with a perfect one inch, then you will know where your 1/4" line is on your sewing machine. I did that, and am now having things line up much better.
Thread
Thread Starter
Forum
Replies
Last Post