|
6 Attachment(s)
As requested, here is one of the patterns I use for tree skirts. You can use as many or few fabrics as you want; you will just need to adjust the size you cut your strips.
First of all, you will need the correct ruler. I use Marilyn Doheny's 9 degree circle wedge ruler. In order to get a circle, you will need 40 wedges. I've also seen a 10 degree ruler at my LQS. If you use that ruler, you would need 36 wedges for your circle. You will need a total of about two yards of assorted fabrics for the top, 2 yards of fabric for the back, 2/3 yard of fabric for the binding, and a 54 square of any kind of batting. Please note that all seams are 1/4. This makes a 50 tree skirt. [ATTACH=CONFIG]251004[/ATTACH] For this skirt, I'm using seven fabrics. To the left of the fabric is the size of each. Each of these is cut by the width of the fabric, then they are sewn together lengthwise. When you are done, you will have one panel that should measure approximately 20-22 inches by 42 inches. You will need three panels for the tree skirt top. Remember to adjust the size of each if you increase or decrease the number of fabrics. Also be aware that each of panels will be cut in both directions, so you'll want to consider placement of each fabric in both directions before you cut your strips. [ATTACH=CONFIG]251005[/ATTACH] Sew strips together, and press all seams in the same direction. Once you have your strips sewn together and pressed, begin cutting out your wedges, alternating the ruler so you are cutting in both directions. You should be able to cut 13 to 14 wedges from each panel. [ATTACH=CONFIG]251008[/ATTACH] Here is the result of the alternating wedges. [ATTACH=CONFIG]251009[/ATTACH] Quilt as desired; I stitch in the ditch vertically between the wedges. Then bind as usual. Here is the finished tree skirt. [ATTACH=CONFIG]251011[/ATTACH] |
Thank you. That is so nice. I can't wait to use up some of my Christmas fabrics.
|
Great tut! thanks for sharing:)
I may need to find the ruler, and book mark the link. |
angiecub, THANK YOU for your tute. You did a great job. Can't wait to get started.
|
Great tutorial! Thanks for sharing!
|
Thanks. How big is the hole in the center?
|
I have seen this ruler but couldn't visualize what you would make with it. Your Christmas Tree Skirt is great. Thanks for sharing.
|
That is amazing the design it makes. Thank you for the tutorial.
|
Forgot to mention that with the ruler, there are also several patterns you may want to use.
|
Great skirt and thanks for showing how it is used. I am a visual learner. I bought some rulers a while back and have not a clue how to use them, so thanks again.
|
| All times are GMT -8. The time now is 02:05 AM. |