Quiltingboard Forums

Quiltingboard Forums (https://www.quiltingboard.com/)
-   Main (https://www.quiltingboard.com/main-f1/)
-   -   HELP! Bernina165e won't sew (https://www.quiltingboard.com/main-f1/help-bernina165e-wont-sew-t271194.html)

Sewmommasew 10-18-2015 04:33 AM

HELP! Bernina165e won't sew
 
I'm looking for someone who can help me. I have a Bernina165e. The machine sat for a few years. Now I'm trying to use it but it will not sew. It successfully winded the bobbin but will not sew. I've read the manual everything looks correct. Idk what else to do. Please help


thanks:)

ksdot417 10-18-2015 04:37 AM

Double check the bobbin winder to make sure it's not still engaged. My machine wouldn't sew one time and I finally realized the bobbin winder was pushed to the on position. Hope it's nothing more serious than that.

Sewmommasew 10-18-2015 04:42 AM

Thanks ksdot417, I checked. That's not it

Sewmommasew 10-18-2015 04:47 AM

I think she needs a checkup :(. Going to doc tomorrow

QuiltMom2 10-18-2015 04:50 AM

I feel your pain!

dunster 10-18-2015 06:22 AM

My neighbor recently had a problem with her sewing machine and I offered to check it for her. It turned out she had two different sized bobbins, both plastic and almost identical, and she was using the wrong one. With the right bobbin her machine sewed beautifully. I'm not suggesting that's your problem, but before taking the machine in for a checkup I would check all the more obvious things.

When you say it won't sew, can you be more specific? Does the needle go up and down? Does it pull up the bobbin thread?

Sewmommasew 10-18-2015 02:43 PM

Hi Dunster

thanks for replying. Needle won't move fabric won't feed. Bobbin is correct. Came with machine. Everything checks out.

Bebe2Ten 10-18-2015 03:01 PM

I guess you've checked to see if the feed dogs are in the up position? Probably so, but worth another look! Best of luck to you.

brandeesmom 10-18-2015 04:04 PM

It sounds like it might need a good oiling. Can you remove the top cover, oil any parts that move or any points/joints that are metal to metal, also lay it down on it's back and oil the metal to metal parts under the machine. Let it set for awhile to allow the oil to penetrate.

dunster 10-18-2015 04:47 PM

Is it easy to move the handwheel to make the needle go up and down? I agree with ksdot that it has the symptoms of still being in the bobbin winding mode, but you've already checked that. Sometimes the needle won't move if there is any lint or thread stuck in the bobbin area. It could be very small, so get a flashlight and look carefully. Other than that I can't think what it might be.


All times are GMT -8. The time now is 01:20 AM.