how to quilt a 112x112 king size quilt?
#1
how to quilt a 112x112 king size quilt?
hi there i made this lovely red and cream Hunters star quilt for my king size bed. it is 112x112 i have a long arm machine and this quilt goes all the way to the edge on my frame. but my machine does not.. so my question is to all you long arm quilters how do you quilt the outer edges of a large quilt. i have a design that i will be using for the center area and i will free motion the star points.
my only thought is to quilt the center and then take off the frame and float the top to do the edges?
any suggestions i would be very happy to hear, PLEASE
my only thought is to quilt the center and then take off the frame and float the top to do the edges?
any suggestions i would be very happy to hear, PLEASE
#2
Power Poster
Join Date: May 2009
Location: NY
Posts: 10,590
I have never done it but I have heard that some longarmers have a way of loading so they can do part of the quilt then reload and do the other part. I was never clear if they were folding part of it over and dealing with the uneveness on the take up rollers or what. I could never wrap my head around it so never tried. So I can't quilt anything larger than 100" wide and that is with a 10 ft frame. Even then I am not comfortable because I can't use my side clamps very well. When I get to them I hit them with the machine head so have to move them or take them off when I get close to the edge. Good luck with this!
#3
Power Poster
Join Date: Dec 2010
Location: Michigan
Posts: 11,276
"my only thought is to quilt the center and then take off the frame and float the top to do the edges?"
This is also the only way I can think of. I would cut the batting narrower so that when you fold the edges up there won't be as much bulk you have to deal with. QUilt to within a couple inches of the batting so you have room to attach the new pieces before you turn & float.
I also have a 10' frame and my sister wants a large quilt for her king. What we had talked about was leaving the side borders off, quilt the center, then quilt the border sections separately and join using a QAYG technique.
Good luck! Let us know how it goes.
This is also the only way I can think of. I would cut the batting narrower so that when you fold the edges up there won't be as much bulk you have to deal with. QUilt to within a couple inches of the batting so you have room to attach the new pieces before you turn & float.
I also have a 10' frame and my sister wants a large quilt for her king. What we had talked about was leaving the side borders off, quilt the center, then quilt the border sections separately and join using a QAYG technique.
Good luck! Let us know how it goes.
#5
Senior Member
Join Date: Jan 2011
Location: Michigan
Posts: 426
My quilter did as Paper Princess suggested for all 3 of the King Sized quilts....while she quilted the center of the quilt on her LA, I hand quilted the borders, and then added the borders after the center was quilted. It was all done with the suggestion from my quilter. I quilt by cash, so whatever she could offer to me, I greatfully accepted.
#6
Super Member
Join Date: Aug 2011
Location: kansas
Posts: 6,407
I have never done it but I have heard that some longarmers have a way of loading so they can do part of the quilt then reload and do the other part. I was never clear if they were folding part of it over and dealing with the uneveness on the take up rollers or what. I could never wrap my head around it so never tried. So I can't quilt anything larger than 100" wide and that is with a 10 ft frame. Even then I am not comfortable because I can't use my side clamps very well. When I get to them I hit them with the machine head so have to move them or take them off when I get close to the edge. Good luck with this!
#9
Super Member
Join Date: May 2008
Location: Colorado
Posts: 1,184
My friend quilted an oversized (for her frame) quilt. She loaded the quilt "normally". With the side that was too long and did not fit the leads, she folded it over - on to the part of the quilt top that was already pinned to the frame. (Don't think you would get an even fold if using red snappers.). (Yes there was an extra lump with the batting etc). While quilting, she did not quilt right up to the edge that was folded. She left some extra space. When the whole quilt was quilted, she took it off the frame and reloaded it, moving the entire quilt over, repinning. The finished quilted edge was folded this time and she quilted the unquilted edge. This worked very well and she did not have folds and tucks. She was also using both a computerized pattern and some free motion in the borders. Good luck. Hope this makes sense to you.
Ellen
Ellen
Last edited by Ellen 1; 01-12-2017 at 08:37 AM. Reason: Clarification
#10
humm now that's a idea. my original thought was to do the middle and then come back and move to do each side... but if i off center it and only make one side not done it might be quicker or less movement of taking on and off the frame?
My friend quilted an oversized (for her frame) quilt. She loaded the quilt "normally". With the side that was too long and did not fit the leads, she folded it over - on to the part of the quilt top that was already pinned to the frame. (Don't think you would get an even fold if using red snappers.). (Yes there was an extra lump with the batting etc). While quilting, she did not quilt right up to the edge that was folded. She left some extra space. When the whole quilt was quilted, she took it off the frame and reloaded it, moving the entire quilt over, repinning. The finished quilted edge was folded this time and she quilted the unquilted edge. This worked very well and she did not have folds and tucks. She was also using both a computerized pattern and some free motion in the borders. Good luck. Hope this makes sense to you.
Ellen
Ellen
Thread
Thread Starter
Forum
Replies
Last Post
dolores
Main
6
11-08-2010 01:16 PM