Vintage Sewing Machine Shop.....Come on in and sit a spell
Banned
Thread Starter
Join Date: Oct 2009
Location: Bikini Bottom
Posts: 5,652
Originally Posted by Honchey
Question??? Are handcrank parts all the same size for use on any qualified model? ie: 66, 15, etc. Anne
Billy
Banned
Thread Starter
Join Date: Oct 2009
Location: Bikini Bottom
Posts: 5,652
Originally Posted by BoJangles
Originally Posted by Honchey
Question??? Are handcrank parts all the same size for use on any qualified model? ie: 66, 15, etc. Anne
Nancy
Billy
Originally Posted by BoJangles
Originally Posted by Phyllis nm
Do you just need old wooden spools to wind thread on? I have a few, and I feel sure you could rig up a winder to rewind them.
Nancy
One of my friends used an electric drill to wind spools for her Two Spools--her hubby rigged it up for her. Cannot remember specifics--it has been 30 years!
Banned
Thread Starter
Join Date: Oct 2009
Location: Bikini Bottom
Posts: 5,652
Originally Posted by okiepastor
If anyone gets desperate for wooden spools, Casey's Wood Works in Maine sells new ones.....
One of my friends used an electric drill to wind spools for her Two Spools--her hubby rigged it up for her. Cannot remember specifics--it has been 30 years!
One of my friends used an electric drill to wind spools for her Two Spools--her hubby rigged it up for her. Cannot remember specifics--it has been 30 years!
I never thought about having to wind the wooden spools for the two spools. I am glad I have a huge collection of spools in case I get lucky and find one!!!
Billy
Super Member
Join Date: Feb 2011
Location: Rhode Island
Posts: 1,663
Hey, can I ask a question about my hand-crank machine? I can sew for about 15 minutes before the screw holding the crank comes loose and it starts clunking loudly (and would fall off, I'm sure, if I just kept cranking!). Is this just something that usually happens with the cranks? I keep a screwdriver right next to the machine now so I can tighten it up when this happens, but it's kind of annoying.
I have an opportunity to buy this machine. Is this a 401? I've heard the praises of the 301, but is this machine good too? It looks so sad under all that grime. I just want to take it home and clean it.
Super Member
Join Date: Apr 2010
Location: Central Jersey & Calabash,NC
Posts: 4,024
Attention Sewing Machine Guru's. I picked this Brother sewing machine yesterday for $10. It's a Bradford 1641 model..I went to the Brother site and cannot locate the year it was built. I sews really quiet..has a few cams(pictured . The needle only sews to the far left..When I move the screws for the zig zag it sews the stitch but I can't figure out how to get the neeedle to sew in the center position. Is it only supposed to sew to the left?? Help!
I can't tell you for sure, but I have had a few machines (mostly Japanese-made) that were dedicated left stitchers. Yours probably is as well.
Originally Posted by Honchey
Attention Sewing Machine Guru's. I picked this Brother sewing machine yesterday for $10. It's a Bradford 1641 model..I went to the Brother site and cannot locate the year it was built. I sews really quiet..has a few cams(pictured . The needle only sews to the far left..When I move the screws for the zig zag it sews the stitch but I can't figure out how to get the neeedle to sew in the center position. Is it only supposed to sew to the left?? Help!
Originally Posted by DonnaC
Hey, can I ask a question about my hand-crank machine? I can sew for about 15 minutes before the screw holding the crank comes loose and it starts clunking loudly (and would fall off, I'm sure, if I just kept cranking!). Is this just something that usually happens with the cranks? I keep a screwdriver right next to the machine now so I can tighten it up when this happens, but it's kind of annoying.
They also fit MOST Japanese class 15 machines. I'm with Billy here--I think they are (for the most part) superior machines.
Well Anne, Miz Johnny can answer this question in detail, but yes and no! The new reproduction HC's work on the 66, 15, 99, 99k, 28, 128 if the machines have the spoked hand wheel, but if you want to put a HC on something other than a Singer you will have to find the original HC for that model. Most of the repro's won't work on say a New Home, etc.
Nancy
You beat me to it! :lol: And she is right I forgot about some of the earlier models like the 27 and 28's that do not have the boss for the motors.
Billy
Originally Posted by Lostn51
Originally Posted by BoJangles
Originally Posted by Honchey
Question??? Are handcrank parts all the same size for use on any qualified model? ie: 66, 15, etc. Anne
Nancy
Billy
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM