Go Back  Quiltingboard Forums > Main
matching seams >

matching seams

matching seams

Thread Tools
 
Old 09-12-2011, 12:11 PM
  #41  
Junior Member
 
Join Date: Feb 2011
Location: Pinehurst, N.C.
Posts: 260
Default

At a recent class at our LQS she suggested before we sew the seam that we match up the seams and sew 3 or 4 stitches over the seam.....then check to see what you think....sometimes there is an easement to take into account, and she says make sure that side with the easement is on the bottom when you sew the seam. (The feed dogs help take in the extra fabric). If, when you sew the few stitches and see it isn't exactly as you want, then you only have a few stitches to remove rather than the entire seam. I do it now all the time....takes a little extra effort, but turns out perfect matching seams. Did I explain that so you could understand it????
Marty K is offline  
Old 09-12-2011, 02:43 PM
  #42  
Member
 
barbie50's Avatar
 
Join Date: Apr 2011
Location: Denver, CO
Posts: 43
Default

[quote=BellaBoo]You can glue baste the seams to a perfect match then sew.

:Yes! I thought I was cheating, but I sometimes use a couple drops of glue right at the seam joint. Then press to set it. Perfect points result!
barbie50 is offline  
Old 09-12-2011, 02:52 PM
  #43  
Super Member
 
JUNEC's Avatar
 
Join Date: Jan 2010
Location: Clearwater, FL
Posts: 2,328
Default

I always make it a habit to check my 1/4" alignment with graph paper before I start sewing any blocks.

I also startch heavily
JUNEC is offline  
Old 09-12-2011, 03:40 PM
  #44  
Senior Member
 
Join Date: Oct 2010
Location: North Kansas City, MO
Posts: 561
Default

Does anyone remember "stay-stitching" from the days of sewing garments, it's that basting seam that allowed you ease fabric to match darts, etc. I usually have pretty good luck "nesting" seams but I I have a problem I'll slip in a few "stay-stitches" to even things out. BE CAREFUL TO, press - not iron that seam or you may end up distorting the fabric or getting a wobbly block.
MissJMac is offline  
Old 09-12-2011, 03:59 PM
  #45  
Junior Member
 
Quiltinvaca's Avatar
 
Join Date: Jul 2011
Location: Vacaville, CA
Posts: 221
Default

Press, press, press, press every seam before you attempt to sew it to the next section. Each section should be pressed in the opposite direction and then you can feel the "hill & valley" when you butt the 2 seams together.

I never pin this area, but I do use a stiletto to hold the seams together until they reach the needle. I use my stiletto much more than pins as I can't seem to sew without one in my hand. (And, it comes in handy if the quilt police get too close!)
Quiltinvaca is offline  
Old 09-12-2011, 04:15 PM
  #46  
Super Member
 
ghostrider's Avatar
 
Join Date: Jan 2009
Posts: 4,688
Default

So many rules and warnings. :lol: I'm glad I'm not a novice quilter...I'd be scared to death about now!

Some say press to one side to nest seams, some say press seams open; some swear by starch, some refuse to use it; some are obsessrive about scant quarter inch seams, some just go for consistency; some glue, some pin, some pinch, some poke with a stiletto.

Best advice I can give you is to try all these tips and tricks, give them a good chance to show you whether they'll work for you, and then go with whatever one(s) you are comfortable using that give you the best results for your effort. There is no right or wrong in quilting.

Above all else, quilting should be fun...matching seams should not put terror in your heart, nor should it be more work than it's worth. Relax and enjoy the ride. ;)
ghostrider is offline  
Old 09-12-2011, 04:58 PM
  #47  
Super Member
 
Join Date: Aug 2010
Location: Hamburg,Western New York State
Posts: 4,856
Default

If I am really frustrated, I pin each seam and sew just 3 or 4 stitches in it to keep it in place. Then I can see if there is extra fabric between the seams that needs to be 'eased' in. I just finished a quilt with points at the seams and this trick worked just fine. This quilt also had biased edges.
trolleystation is offline  
Old 09-12-2011, 05:00 PM
  #48  
Super Member
 
Arleners's Avatar
 
Join Date: Jul 2007
Location: Stony Brook, NY
Posts: 1,225
Default

This is something I struggled with in the past. Do you press your seam allowances in oposite directions? That is a big help. I also pin the seam allowances first when I am joining pieces. Keep practicing. It will come to you eventually.
Arleners is offline  
Old 09-12-2011, 06:02 PM
  #49  
Senior Member
 
Join Date: Mar 2010
Location: Southeast Michigan
Posts: 339
Default

Originally Posted by Rose Marie
My half square triangles and flying geese are always made over sized and then cut down to size. No more trouble with seams that dont match, they just go togather perfect.
I find this helps me too. :thumbup:
janquilts'ncrochets is offline  
Old 09-12-2011, 07:22 PM
  #50  
Super Member
 
Join Date: Aug 2010
Location: Portland, OR via Hawaii
Posts: 1,342
Default

My problem generally arises when I'm working too fast.
I generally walk away for a minute or two and remember to deep breath, relax and "enjoy" the moment then things seem better.
Momsmurf is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cmilton
Main
7
06-23-2011 03:41 AM
quiltnchik
Main
107
05-15-2011 06:10 PM
Blinky
Main
10
11-20-2010 02:57 PM
sewcrazygirl
Main
32
08-25-2010 10:41 AM
sondray
Links and Resources
0
07-16-2009 03:58 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter