Go Back  Quiltingboard Forums >
  • Main
  • Batting >
  • Batting

  • Batting

    Thread Tools
     
    Old 02-23-2012, 11:06 AM
      #1  
    Member
    Thread Starter
     
    Join Date: Dec 2011
    Posts: 35
    Default Batting

    I've just finished a 'Square Dance' quilt top and my sister is coming to my house in 2 days to help me put it on the frame. Should I do anything with the batting before she gets here?...take it out of the package and lay it out on the bed in the spare room?...throw it in the dryer for a few minutes?

    It seems I should do something to it to take the fold marks out.

    MrsBeasley
    MrsBeasley is offline  
    Old 02-23-2012, 11:12 AM
      #2  
    Moderator
     
    kathy's Avatar
     
    Join Date: Nov 2006
    Location: on the Texas Coast
    Posts: 4,020
    Default

    depending on how much pucker you want in your quilt, I soak my batting in warm water then spin DO NOT AGITATE I lost one by forgetting! Then put it in the dryer, then lay it out on the extra bed, you still get enough shrinkage to look like an old quilt, if you don't want to preshrink it just toss a damp bath towel in the dryer with it on warm for a few minutes then lay it out, any fold marks that remain will easily disappear once you get it on the frame
    kathy is offline  
    Old 02-23-2012, 12:11 PM
      #3  
    Super Member
     
    Join Date: Jan 2011
    Location: Small town in Northeast Oregon close to Washington and Idaho
    Posts: 2,795
    Default

    I agree with putting it in the dryer with a damp towel. Should take any folds out.
    jcrow is offline  
    Old 02-23-2012, 12:33 PM
      #4  
    Banned
     
    Join Date: Jan 2011
    Posts: 525
    Default

    I would say it depends on what type of batting you're using. I used to use Mountain Mist Light Batting, which is polyester. I would just lay it out on a bed for a day or two to ease the wrinkles. (One time I put it in the dryer on very low heat to speed up the process and it really fluffed up the batting - big mistake!)

    For the last several years I've been using Hobbs Heirloom 80/20 and I do presoak it then dry it on low heat. It relaxes the folds and wrinkles and shrinks it down some since I don't like a lot of shrinkage and puckering on my finished quilts. If you do like the puckered look on your finished quilts, then either lay it out on a spare bed for a day or two or as suggested above, throw in the dryer with a damp towel to help it relax. (doing this will still shrink it some, but not as much as it would if you did the presoak first.)

    Hope this helps some!
    SuzanneG is offline  
    Old 02-23-2012, 01:03 PM
      #5  
    Power Poster
     
    Join Date: Dec 2008
    Location: Western Wisconsin
    Posts: 12,930
    Default

    I often use Hobbs 80/20 and I don't even bother with a damp towel. I just put it in the dryer on low for 10 minutes or on no-heat fluff for 20 minutes. Maybe I'm not as fussy as some, but I've never found any remaining wrinkles to interfere with quilting and finishing.
    Prism99 is offline  
    Old 02-23-2012, 01:17 PM
      #6  
    Super Member
     
    Join Date: May 2011
    Location: Southeast Wisconsin
    Posts: 1,070
    Default

    I usually use Hobbs 80/20 and throe in dryer on fluff for a while.

    Here's a question that has me stumped: If I want to preshrink the batting, how would you do it when you have a front-loading HE machine? It uses a scant few inches of water so can't soak the batt there. I wound not be able to manage it in the bathtub... too heavy to try to lift and squeeze the water out.
    sewmary is offline  
    Old 02-23-2012, 01:22 PM
      #7  
    Banned
     
    Join Date: Jan 2011
    Posts: 525
    Default

    Originally Posted by sewmary
    I usually use Hobbs 80/20 and throe in dryer on fluff for a while.

    Here's a question that has me stumped: If I want to preshrink the batting, how would you do it when you have a front-loading HE machine? It uses a scant few inches of water so can't soak the batt there. I wound not be able to manage it in the bathtub... too heavy to try to lift and squeeze the water out.
    Mary, I also have a front loader and to presoak my batting, I use the hand wash cycle. While the drum does rotate, it only goes around one slow time every 45 seconds, so it's not really agitating it at all, just moving it around once every 45 seconds very gently. I have done this many times with Hobbs 80/20 batting with no problems whatsoever. Hope this helps you some.
    SuzanneG is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    craftybear
    Links and Resources
    5
    05-20-2011 12:08 AM
    craftybear
    Links and Resources
    0
    04-30-2011 12:34 AM
    quilt_happy
    Main
    2
    12-07-2009 11:44 PM
    desertquilter
    Main
    8
    04-13-2008 09:14 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter