Go Back  Quiltingboard Forums >
  • Main
  • Messed up quilt back from long arm quilter >
  • Messed up quilt back from long arm quilter

  • Messed up quilt back from long arm quilter

    Thread Tools
     
    Old 08-02-2012, 09:42 PM
      #11  
    Senior Member
     
    sylviak's Avatar
     
    Join Date: Jul 2010
    Location: southern Oklahoma
    Posts: 954
    Default

    Ask to see samples of their work. I don't quilt a lot for other people, but I take pictures of my quilts and have several of my own that I can show them. Talk to friends that use a LA quilter and get them to recommend someone and look at your friend's quilt. Even if the quilter quilted from the back of the machine, she should have been checking the quilt for any problems. If you talk to her and she acts like she doesn't want to fix it or doesn't know how, take the quilt to another LAQ. It probably can be fixed and the needle holes won't show after spritzing with a little water.
    sylviak is offline  
    Old 08-02-2012, 10:07 PM
      #12  
    Power Poster
     
    Join Date: Feb 2009
    Location: Northern Michigan
    Posts: 12,861
    Default

    communication is extremely important when you are hiring some one to quilt for you- you need to take the quilt to her- discuss what you would like- talk about any problems that may come up- also when the quilt is finished- you should look it over- before paying- and see if it is what you wanted- if there are problems they should be discussed - find out what happened- taking the quilt home - then complaining to everyone else solves nothing.
    if the problems are due to something you did the quilter should be able to discuss it with you and explain how to avoid them next time, she should also be able to suggest some ways to (fix) the current problem- that size seems awful small to really have had any problems---have you checked out other work by the quilter-do you know that normally her work is much better? you need to go back to her & discuss the problem & see what can be done to fix it- either by you or by her.
    ckcowl is offline  
    Old 08-03-2012, 02:06 AM
      #13  
    Senior Member
     
    Join Date: Feb 2011
    Location: central indiana
    Posts: 686
    Default

    I had a lot of my quilts done on a high end Statler Stitcher by a friend. What I found was that she relied on the computer too much and would walk away from the quilt while the machine was running during interuptions. Issues happened that she did not see while they were happening. Since I was not asking for a show quilt, I did not mind most of them but when it was a tension issue or fold/pucker, I was so very disappointed.
    sweetana3 is offline  
    Old 08-03-2012, 02:51 AM
      #14  
    Super Member
     
    quiltinghere's Avatar
     
    Join Date: Mar 2010
    Location: PROFESSIONAL Longarm Quilter NW Indiana
    Posts: 3,398
    Default

    I'm so sorry this happened to you. You must be heartbroken

    Lack of communication is the big problem. IF there was a noticeable issue (top not square, improper seam intersections, different types of fabric, etc.)before or during the quilting process, the LA should have communicated it to you.

    Where do the puckers occur on the quilt top? Do you have pictures you can post?

    Another quilter asked but I didn't see an answer...Did you explain that you wanted to enter it into a show? (Stopping to say it shouldn't matter...just asking if she knew and you still got those results.) Is this your first quilt using her services?

    There is a SERIOUS learning curve to longarm quilting. Someone could go out and just buy a long arm setup, put up flyers and quilt for others...but if they are not competent at it...they won't have any customers. The longarm business is run by reputation.

    I would talk to her about it...in person with the quilt. Someone mentioned that the LAQ should make suggestions to you. Are you open to suggestions from her?

    Did you ever hear of the phrase "ohhhh that'll quilt out"? Everyone should remember that only so much can be quilted out.

    Nan
    quiltinghere is offline  
    Old 08-03-2012, 03:26 AM
      #15  
    Senior Member
     
    allie1448's Avatar
     
    Join Date: Apr 2010
    Location: Whitby, Ontario. British expat
    Posts: 644
    Default

    Originally Posted by Krisb
    Posts like this one make me wonder whether there is or should be some certification process for LAQ's, demonstrating a basic level of competency. Or could I go and buy a frame, put my Janome 1600p on it, put ads in stores and/or papers, and start a LA business? And if I did want to engage the services of LA quilter, how would I be sure that the person was competent and reputable? I know---use somebody from this board, of course!

    This is a serious question.
    I think it is sometimes too easy to set up as a LA quilter without the experience or knowledge. I only do a few quilts for others and always make sure they know that even after having my machine for 21months I still consider myself a novice on a steep learning curve for anything other than simple meandering. Good luck with your quilt I hope you get it fixed and let us know the outcome
    allie1448 is offline  
    Old 08-03-2012, 03:38 AM
      #16  
    Member
     
    Join Date: Apr 2011
    Location: Ooltewah, TN
    Posts: 47
    Default

    I'm so sorry to hear of your LA quilter experience. I am a LQer and always meet with the customer first and discuss the quilt. If I see a problem that may will not quilt out I tell them before I take the quilt so they will know what to expect. What I tell customers regarding warpy or wavy blocks and borders is that when you iron it, if it does not laY FLAT AND SQUARE then it probably won't quilt flat and square. There are thing you can do to resolve those issues, but they don't always work. I would talk with her and see if she can requilt any of those areas.
    slmeyer is offline  
    Old 08-03-2012, 04:19 AM
      #17  
    Super Member
     
    Join Date: Feb 2009
    Location: Indiana
    Posts: 3,607
    Default

    I would talk to your la quilter. If you don't you won't know why it happened. If it was your mistake you need to know what it was and if it was the quilter they need to know you were not happy with the results. That way whomever was at fault will be able to avoid this situation in the future.
    mcdaniel023 is offline  
    Old 08-03-2012, 04:22 AM
      #18  
    Member
    Thread Starter
     
    Join Date: Feb 2008
    Location: AZ
    Posts: 61
    Default

    Thanks for all your input. I did with your encouragement call the LAQ and told her of my concerns. Since she had done another quilt for me in the past, we had a good conversation. She is coming to pick up the quilt so that we can both decide what to do. Regardless, it's the last one she'll ever do for me.

    Originally Posted by 1rottendog
    Before I get too upset, maybe I goofed. My 50" x 50" wall hanging came back with puckers quilted in on the front. The back is fine. What would cause this? I squared up blocks before putting them together, pressed it very well so there would be no wrinkles or bulgy spots. This is a quilt I wanted to put in a show in January and, of course, now I can't. If I take out all the stitching, will needle marks show? Do I say anything to the lady who quilted it for me? Thanks for any advice/help.
    1rottendog is offline  
    Old 08-03-2012, 04:52 AM
      #19  
    Senior Member
     
    rj.neihart's Avatar
     
    Join Date: Sep 2011
    Location: Missouri
    Posts: 796
    Default

    I'm really sorry this happened. This has always been one of my fears if deciding to take my top to a LA. I'd have a talk with her and let her know the problem, and hopefully there is a way to fix this. Could be she's not as experienced as she had hoped, or could be some pucker was on the top before she did the quilting. If you don't talk with her, she will never know of your unhappiness.
    rj.neihart is offline  
    Old 08-03-2012, 05:17 AM
      #20  
    Senior Member
     
    crashnquilt's Avatar
     
    Join Date: Aug 2008
    Location: Lebanon, Missouri
    Posts: 602
    Default

    I am sorry this happened with your wall hanging. I am glad to hear that the quilter is coming to address your concerns. What I do find a bit disturbing is your saying, "Regardless, it's the last one she'll ever do for me." If you turn this situation around how would you feel? Example, you make a quilt but one of the blocks does not lay flat so she says "You didn't make this square right so I will not quilt for you anymore."
    It was mentioned that there should be some type of certification for longarmers. Then shouldn't there be some type of certification for shop owners and "quilt teachers"?
    You can go to a beauty salon and get a bad haircut from a licensed professional. You can go to a doctor and get an incorrect diagnosis.
    My point is we are human and we all make mistakes.
    crashnquilt is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    mjpEncinitas
    Links and Resources
    26
    11-28-2019 06:48 AM
    Debapril
    Main
    8
    11-20-2017 05:10 AM
    dianna1234
    Pictures
    12
    08-13-2011 12:56 PM
    Mimimaryv
    Pictures
    113
    01-18-2011 04:38 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter