Glad Press-n-Seal for FMQ, and another related question
04-04-2013, 04:21 PM
#42
Super Member
Join Date: Oct 2009
Location: Maine-ly Florida
Posts: 3,917
Originally Posted by ArchaicArcane
Please be very careful with the Mr Clean Magic erasers. They're actually abrasive, it's how they "magically" remove things. I learned the hard way with the Teak table we got from DH's parents. There were sharpie marks on it from the kids, so I thought, hey these new Magic Erasers seem like just the thing....
It took the sharpie marks off, along with part of the finish. I had to re-oil the table and it still didn't ever quite match. Luckily, I'm the only one who knew where the marks were.
If you use one on a shiny surface, and look carefully, you can see the scratches it leaves, making the surface dull where you use it. They're great for some things, but I wouldn't use them on a sewing machine bed myself
Other than really porous surfaces, I usually use a dry erase marker to remove permanent marker. The solvent in the pen dissolves the "permanent" marker as well, then you wipe it off. I do this on all of my rulers when I use permanent marker and get some on it. I've done it to the tops of laptops, dry erase boards, desk tops, all sorts of things. It's worked on almost everything. The surfaces where it's "pitted" (like the finish on a early 90s Pfaff for instance) it doesn't work as well on, but with more elbow grease you can get even most of that out.
It took the sharpie marks off, along with part of the finish. I had to re-oil the table and it still didn't ever quite match. Luckily, I'm the only one who knew where the marks were.
If you use one on a shiny surface, and look carefully, you can see the scratches it leaves, making the surface dull where you use it. They're great for some things, but I wouldn't use them on a sewing machine bed myself
Other than really porous surfaces, I usually use a dry erase marker to remove permanent marker. The solvent in the pen dissolves the "permanent" marker as well, then you wipe it off. I do this on all of my rulers when I use permanent marker and get some on it. I've done it to the tops of laptops, dry erase boards, desk tops, all sorts of things. It's worked on almost everything. The surfaces where it's "pitted" (like the finish on a early 90s Pfaff for instance) it doesn't work as well on, but with more elbow grease you can get even most of that out.
04-05-2013, 02:59 AM
#44
Super Member
Join Date: Sep 2010
Location: Guelph, On. -
Posts: 2,021
Wax paper is my choice of material. I run the paper thru my domestic machine without thread tracing the inked pattern on regular paper. Then I use the wax paper on my longarm and follow the dots. Tears beautifully.
MaryKatherine
MaryKatherine
04-05-2013, 04:38 AM
#46
Senior Member
Thread Starter
Join Date: Dec 2012
Posts: 538
Originally Posted by ArchaicArcane
Please be very careful with the Mr Clean Magic erasers. They're actually abrasive, it's how they "magically" remove things. I learned the hard way with the Teak table we got from DH's parents.
04-05-2013, 04:41 AM
#47
Senior Member
Thread Starter
Join Date: Dec 2012
Posts: 538
Back to the topic...I think I'll try the 'perforation' method with tissue paper or even the used dryer sheets. I was reading a post on a blog yesterday and was glad to see that I wasn't the only one who is hesitant to mark on the right side of fabric 
04-05-2013, 05:35 AM
#48
Senior Member
Join Date: Jun 2011
Posts: 976
Originally Posted by woody
I found the glad press and seal a real pain to get out from under my stitches. (I used some to when I did some hand quilting, so my stitches weren't exactly tiny) also I used a red sharpie to mark my quilting lines and my thread actually took on some of the colour so now it is pink
As for paper piecing use the cheapest paper you can find and use a slightly smaller stitch than normal, and tear carefully, it should all come out. If there are tiny pieces left they would wash out when you first wash the quilt.
As for paper piecing use the cheapest paper you can find and use a slightly smaller stitch than normal, and tear carefully, it should all come out. If there are tiny pieces left they would wash out when you first wash the quilt.
04-05-2013, 06:07 AM
#49
Member
Join Date: Apr 2013
Posts: 8
Originally Posted by Skittl1321
If it makes you feel better, I used a red sharpie to mark lines on interfacing, and after sewing them all, I now have a nice red line across the bed of my sewing machine
04-05-2013, 06:11 AM
#50
Member
Join Date: Apr 2013
Posts: 8
I then traced my design onto washable interfacing , I used a little bit of glue stick to hold it in place. When I was finished with my quilting I just put it in the washer and everything washed out beautiful.
You mean "Wash away" ot "Washable" right?
You mean "Wash away" ot "Washable" right?
Thread
Thread Starter
Forum
Replies
Last Post
Quiltntime
Main
33
04-21-2011 09:30 AM
sondray
Links and Resources
0
03-21-2008 04:07 PM
