Glenn

I got me another machine yesterday a Grover and Baker Sn: 363694 MDL 9 made around 1860 The last patten date is June 22,1852 so it came after this date sometime. I need a source for a manual or at least the needle size and threading instructions. If anyone can help please(maybe Steve the skeeter)
Skip

SteveH

from Crys at Needlebar regarding my G&B Lockstitch
"I don't know what needle this model uses but G&B used 3 kinds of non-curved needles. So one of them should work in your machine. There is a flat shank needle known as the G&B 19. It is just about impossible to find and I don't know of any equivalents. It is 1 7/8 inches long and the flat part of the shank is very small. i.e. it's shankless. It's not much bigger than the shaft of the needle.

G&B also used 2 kinds of round shank needles. One is the 13x1 and the other is the 2x1. For the 2x1 you should be able to use LAx361."

I have put in a Boye #2 and it works great.

also, based on this serial number DB
http://fiddlebase.jimdo.com/american...-grover-baker/
(the webmaster says it was pulled from the digital copy of grace coopers book on the Smithsonian site)

mine which is serial number 340205 dates to 1871.

Glenn

Steve do you have thrading instructions for the 9 The flat side goes to the bar or away from the bar. I have some no #2 I will try. What direction to you thread the needle left to right ? from the front? Thanks for the info Steve
Skip

SteveH

long groove away from shuttle, thread left to right (that is what I am doing, I have no manual either)

These wacky machines have something that I have NEVER seen on a VS or TS machine... The curved slide track for the shuttle is a bolt-in arrangement that is "adjustable" yikes....

Steve

Glenn

Yes Steve I did pay attention to the adjustable slide track arrangement. Yikes is right. I hope I never have to adjust that thing. Thanks for the info.

DanofNJ

Glenn, Spectacular Machine... (and I'm Envious). Beautiful, Beautiful, and more Beautiful!!!

nanna-up-north

Skip, you have one of those lovely ladies as well?? It's a beauty..... keep us posted on her progress. She looks pretty great right now but I know you'll put the magic touch on her.

fizeos

Hello, I have a Pfaff Treadle machine. The serial number tells us that the machine was made ​​in 1902 (http://www.ismacs.net/pfaff/pfaff_ma...ure_dates.html).
But I don't understand what model is this? And how much is this sewing machine?
[ATTACH=CONFIG]430533[/ATTACH][ATTACH=CONFIG]430535[/ATTACH][ATTACH=CONFIG]430536[/ATTACH][ATTACH=CONFIG]430537[/ATTACH][ATTACH=CONFIG]430538[/ATTACH][ATTACH=CONFIG]430539[/ATTACH][ATTACH=CONFIG]430540[/ATTACH][ATTACH=CONFIG]430541[/ATTACH]

fizeos

By the way, the machine in working condition.

grant15clone

I am starting work on a Free Westinghouse that was in a cabinet. It has the strangest knee controller I have seen. Before yesterday, I had not even seen a picture of this one.
~G~

[ATTACH=CONFIG]430559[/ATTACH]