Go Back  Quiltingboard Forums >
  • Main
  • pincushion filling >
  • pincushion filling

  • pincushion filling

    Thread Tools
     
    Old 09-29-2013, 05:21 AM
      #11  
    Super Member
     
    Join Date: Jan 2012
    Posts: 4,783
    Default

    Someone made me a pincushion and she used wool. I don't know if it keeps the pins sharp, but I believe the lanolin in the wool prevents the pins from rusting. It is my favorite pincushion. She used a small round aluminum kitchen mold for the base, and glued the outer fabric inside the rim. The only other pincushions I use are magnetic. I like them a lot, and prefer to take one of those with me to quilt somewhere other than at home. The pins don't fall off in traveling.
    JustAbitCrazy is offline  
    Old 09-29-2013, 07:14 AM
      #12  
    Super Member
     
    Join Date: May 2010
    Location: Southeast Idaho
    Posts: 3,207
    Default

    I stuff all of my pin cushions when I make them, with regular polyfill stuffing. I add a small amount of steel wool during struffing so it is surrounded by batting. Works for me but some folks who live in more humid areas say there is a possibility of the steel wool rusting. I think it would be ok as long as it does not get wet. Any one have thoughts on this?
    SandyinZ4 is offline  
    Old 09-30-2013, 04:22 AM
      #13  
    Power Poster
     
    Join Date: Jun 2010
    Location: Alabama
    Posts: 15,368
    Default

    I stuff my pin cushions with polyfil and I have made a ton of them. We used to have a pin cushion swap. Don't know if it still is in the works but I loved it.
    twinkie is offline  
    Old 09-30-2013, 04:55 AM
      #14  
    Super Member
     
    Join Date: Nov 2009
    Posts: 2,061
    Default

    Crushed walnut shells, sand, fine gravel, lentils, left over batting scraps cut fine, etc. Lots of choices.
    lclang is offline  
    Old 09-30-2013, 05:41 AM
      #15  
    Super Member
     
    cherrio's Avatar
     
    Join Date: Jun 2010
    Location: Ohio, the land of 4 seasons. sometimes all in the same week!
    Posts: 2,487
    Default

    we DO HAVE A SWAP GOING! to be mailed by Oct 25th I think. PaintmeJudy is the new hostess. I use walnut shells on the bottom of most of my pin cushions just for weight. the stuff em with polyfill. I was going to add the steel wool but like some mentioned it may rust when going to a moist area-like OHIO. Maybe I'll try it with one for myself and let you know how it works out. Now jump on over to the SWAPS and join us!!
    Originally Posted by twinkie
    I stuff my pin cushions with polyfil and I have made a ton of them. We used to have a pin cushion swap. Don't know if it still is in the works but I loved it.
    cherrio is offline  
    Old 09-30-2013, 05:45 AM
      #16  
    Super Member
     
    ghostrider's Avatar
     
    Join Date: Jan 2009
    Posts: 4,688
    Default

    Like all metal tools, plant material (walnut shells, sawdust, rice, beans, etc) will dull pins in pincushions. And, like all metals tools, minerals (emery, steel wool, clay cat litter, sand, etc) will sharpen them. Think about what dulls metal tools (saws, scissors, rotary cutters, knives, garden clippers, etc) and what is used to sharpen them.
    ghostrider is offline  
    Old 09-30-2013, 05:56 AM
      #17  
    Super Member
     
    jmabby's Avatar
     
    Join Date: Dec 2010
    Location: Minnesota, Land of 10,000 Lakes
    Posts: 1,490
    Default

    I like sand, but I do have crushed walnut shells which aren't quite as heavy. I think the sand keeps your needles sharpened.
    jmabby is offline  
    Old 09-30-2013, 06:04 AM
      #18  
    Super Member
     
    Join Date: Nov 2010
    Location: southeast iowa
    Posts: 2,887
    Default

    I've been in several pin cushion exchanges. I don't like batting....too light. They say sawdust molds (drats, as we have that). Personally, I like silica sand (bought at a lumber/Home Depot, etc. store). You get a 25 lb bag for $3. We use the leftover - tons of it - to put between the cracks on our brick pathway. I've used crushed walnut shells, too. They are pretty expensive. Oh, yes, I put a muslin outer shell around my sand to help keep it in. Have fun.
    daisydebby is offline  
    Old 09-30-2013, 06:05 AM
      #19  
    Junior Member
     
    Join Date: Mar 2010
    Location: Jonesville, MI
    Posts: 137
    Default

    I read somewhere to use steel wool as it will sharpen your pins. I have a pattern to make one and I like the idea of putting the fiberfill around the steel wool.
    grammo is offline  
    Old 09-30-2013, 06:20 AM
      #20  
    Super Member
     
    raedar63's Avatar
     
    Join Date: Jul 2010
    Location: Ohio
    Posts: 3,712
    Default

    I have been thinking about this too, I am thinking about using something in the bottom for weight and filling it the rest of the way up with steel wool because I have been reading that this will keep the pins sharp.I have also read to buy bird grit in the pet isle at places like walmart I did pick up some of this at wal mart ,it comes in a box about the size of a mac and cheese box ( I had trouble finding it cause I was looking for a bag).It was around a buck I think. Remember the old tomato pincushions that had a small strawberry attached with to the larger pin cushion to sharpen needles ? They had some type of grit in them . You know back in past times pincushions were filled with hair ! My grandma actually had a hair jar that you placed the hair in after you combed your hair, it was specially made for this purpose. She was proud of this hand painted little container , she used to tell me that the " rich ladies had them in the olden days "so it made her feel fancy when she looked at it lol
    ( They were actually called hair receivers for those interested in fun old facts)I know way off topic but a fun fact that women used to use hair.

    Last edited by raedar63; 09-30-2013 at 06:30 AM.
    raedar63 is offline  

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter