craft paint or auto paint for chips?
#1
Member
Thread Starter
Join Date: Aug 2013
Location: Pacific NW
Posts: 66
craft paint or auto paint for chips?
What's the advice on paint chips? I have a 185, so green, that has a chip in the paint. I'd like to fill it in and I read either here or on the Facebook page that there's a paint pen that is preferred. I can't find the post now. any ideas?
#3
Super Member
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Honestly, I'd live with the paint chip. These machines have a history and a paint chip or many paint chips are something most of us live with and can appreciate. I suspect that if you trying to color match and paint it, it will look much worse than leaving it alone.
#4
Member
Thread Starter
Join Date: Aug 2013
Location: Pacific NW
Posts: 66
I can do that! I will liken it to my "tiger stripes" from having all my kids I wouldn't want to try to fill all those in lol
#5
Senior Member
Join Date: Nov 2011
Location: Cary, NC
Posts: 383
I agree with Joe. I had a chip right in the center of the bed of my machine, right underneath the arm. How it got there, I'll never know. It always caught my eye. I finally went to the local train/model/hobby shop and picked out the closest beige for my Rocketeer. I tested the Testor paint underneath the machine first to see if it matched or if I'd need to buy another color to mix. Luckily, it was pretty close. I used someone else's suggestion and used a toothpick instead of a brush. I put a tiny dot of paint in the chip and let it spread outward. This didn't fill the chip completely, so I did it again, also with a tiny amount of paint.
After it dried, you could see that the paint was slightly different, but I wasn't trying to match exactly, I just didn't want that chip to constantly catch my eye, being in the center of the bed. It was good enough that I touched up a couple of other chips around the edge of the machine too. That was a year ago and, until now, I hadn't thought about that chip again.
Tate
After it dried, you could see that the paint was slightly different, but I wasn't trying to match exactly, I just didn't want that chip to constantly catch my eye, being in the center of the bed. It was good enough that I touched up a couple of other chips around the edge of the machine too. That was a year ago and, until now, I hadn't thought about that chip again.
Tate
#6
Super Member
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
#7
I LUV this reply as I was also wondering what to do about them. Thank you
#8
Super Member
Join Date: Aug 2010
Location: Kansas City, Missouri
Posts: 1,040
Thanks, Candace. You just solved my problem as I had a few paint chips on the face plate of my green Singer 185J. I think I will just let it be and not try to fix it.
Thread
Thread Starter
Forum
Replies
Last Post
zozee
General Chit-Chat (non-quilting talk)
12
08-01-2016 03:49 PM
kountrykreation
For Vintage & Antique Machine Enthusiasts
34
02-16-2012 11:01 AM
craftybear
Links and Resources
3
06-05-2011 08:53 PM
craftybear
Links and Resources
15
02-20-2011 07:03 PM