Disposing of rotary cutter blades
#31
I used to wrap them in a piece of cardboard, tape closed and dispose. But I buy my blades in the 5-pack refills and they come in a round plastic container. Once I used up all the blades in the first pack, I began using the empty containers to put the used blades into for disposal. I mark the container "used blades" (it holds about 7 or 8 used blades), then I just dispose of that, easy peasy and safe!
#33
Super Member
Join Date: May 2008
Location: Rocky Mountains
Posts: 1,866
I also use the yellow container that the new blades come in. I put an X on each used blade with a Sharpie so I know they are the used blade and toss in the garbage when full. I like the idea of the glass jar because then who ever is the lucky person to sort thru the trash can see what he is handling without having to open it up.
#34
Junior Member
Join Date: Oct 2007
Location: Pennsylvania
Posts: 213
I have taken a small water bottle - put the cap on and cut a slot in the side of the bottle. You can put the used blades in the slot - kind of like a piggy bank for "spent" blades. I usually put a strip of duct tape over the slot and toss it in the garbage.
#36
Junior Member
Join Date: Dec 2010
Location: mid MI
Posts: 288
I used to wrap them in a piece of cardboard, tape closed and dispose. But I buy my blades in the 5-pack refills and they come in a round plastic container. Once I used up all the blades in the first pack, I began using the empty containers to put the used blades into for disposal. I mark the container "used blades" (it holds about 7 or 8 used blades), then I just dispose of that, easy peasy and safe!
#37
Junior Member
Join Date: Feb 2011
Location: Mt. Vernon,IL.
Posts: 134
Rotary Blades
Did you know you can send in your old blades for replacements at a minimal cost? It's through L P Sharp Co. They are online and have all the information about sending them in, etc. They take Olfa and generic blades. I tried it and am very pleased with the blades they sent back.
You experienced quilters have probably solved this problem long ago, but here is my solution.
Every time I threw away a rotary cutter blade, I would wrap it carefully in paper toweling so my husband or I wouldn't cut ourselves while emptying the trash. Then I found the perfect solution - an empty Ice Breakers mint or candy container. It's the perfect size and the top flips open for easy access. When it's full, I just toss it in the trash. You can buy one in the gum, candy and breath mint section. It would be great for sewing machine needles too.
Every time I threw away a rotary cutter blade, I would wrap it carefully in paper toweling so my husband or I wouldn't cut ourselves while emptying the trash. Then I found the perfect solution - an empty Ice Breakers mint or candy container. It's the perfect size and the top flips open for easy access. When it's full, I just toss it in the trash. You can buy one in the gum, candy and breath mint section. It would be great for sewing machine needles too.
#40
Super Member
Join Date: Nov 2006
Location: Bar Harbor, ME.
Posts: 2,911
I have large pill containers from prescriptions and I keep all my used blades in there until it's full and then safely throw it away.
Smaller pill bottles I use for my needles that are broken or not of any use . Reuse and recycle is my motto. I make sure to take the labels off the bottles first though.
Smaller pill bottles I use for my needles that are broken or not of any use . Reuse and recycle is my motto. I make sure to take the labels off the bottles first though.
Thread
Thread Starter
Forum
Replies
Last Post
Caroline S
For Vintage & Antique Machine Enthusiasts
19
03-05-2012 09:38 AM