Do you have trouble deciding which way to press seams?

Reply Subscribe

Page 3 of 3

Thread Tools

01-31-2014, 07:34 PM

#21

bearisgray

Power Poster

Join Date: May 2008

Location: MN

Posts: 24,476

Quote:

Originally Posted by ube quilting

If the problem is just the way the seams lock do just what Judy363905 does. Just snip the seam allowance on one of the seams you want to lock together and press the end of it in the opposite direction. It should not interfere at all with the seam staying together. I do this all the time. I snip the seam almost to the sewn line on an angle about 2" away from where I want to sew the locking seam. Press it over and you are good to go.
peace

I try very hard to avoid a twistrd seam allowance. But, if I do get one, I snip each side of the seam in a different place. In other words, only one layer at a time. I think it weakens the seam leess to do it that way.

02-15-2014, 06:42 AM

#22

MommyA

Junior Member

Thread Starter

Join Date: Feb 2011

Location: Central PA

Posts: 116

Thanks QuiltnNan. I did not see the mistake. I will be checking all the other blocks very carefully. Can't wait to finish this one.

02-15-2014, 06:59 AM

#23

tessagin

Power Poster

Join Date: Mar 2013

Location: Corpus Christi, Tx.

Posts: 16,105

I see it now also.

Quote:

Originally Posted by QuiltnNan

[ATTACH=CONFIG]459472[/ATTACH]

as you can see, the black outlined blocks have the beige parts aligned to the center. the pink outlined block has the beige parts aligned the opposite direction

02-15-2014, 07:08 AM

#24

huntannette

Super Member

Join Date: Jan 2009

Location: northern ontario

Posts: 3,648

love it!!!

02-16-2014, 02:28 AM

#25

Zinda

Senior Member

Join Date: Sep 2012

Posts: 512

I usually press towards the dark or open. One pin in the middle of the seam, and one on each side. Remove the pin in the middle. This works for either type of seam.