Go Back  Quiltingboard Forums > Main
Trouble moving quilt >

Trouble moving quilt

Trouble moving quilt

Thread Tools
 
Old 03-12-2014, 05:01 AM
  #11  
Super Member
 
Join Date: Jan 2011
Location: Nawth o' Boston
Posts: 1,879
Default

Originally Posted by Prism99 View Post
When I used my domestic machine to quilt, I found it *very* helpful to have a slick, smooth surface all around the machine. This was what worked for me:
http://www.youtube.com/watch?v=g14govA4pIM
http://www.youtube.com/watch?v=yAS25v3ZTk0
http://www.youtube.com/watch?v=A0lk7UBQgZY
http://www.youtube.com/watch?v=hwrA6...S0W_XGetgVinHQ

Also, I found that I did much better standing up to quilt. My cutting table was exactly the right height for me to stand while machine quilting. The styrofoam "surround" created a much larger surface to support the quilt than just an extension table with or without the slider.

Some people use turtle wax or silicone spray on their flat surfaces to make them more slippery; however, I'm not sure how this works on difference surfaces (such as the plastic of the typical sewing machine bed, other types of plastic, wood, etc.).
Stand up to quilt? What a great idea! In all the FMQ classes I've been no no one ever suggested that, but it makes perfect sense when you have to move a big quilt! I have a large area around my machine, but sitting down I can't really do much with it, and throwing the quilt over my shoulder and mushing it on my lap/chest only goes so far.

Thanks!
SueSew is offline  
Old 03-12-2014, 05:08 AM
  #12  
Senior Member
 
quiltin-nannie's Avatar
 
Join Date: Jan 2013
Location: NW PA
Posts: 843
Default

I had the same problem until I bought an oven liner and a pair of garden gloves! I place the oven liner down, mark where my needle will enter and put a quarter inch hole there. I do use a little scotch tape on a couple places to keep it from shifting. My garden gloves help me move the quilt. Problems solved for under $10!
quiltin-nannie is offline  
Old 03-12-2014, 06:12 AM
  #13  
Super Member
 
Join Date: Jul 2010
Location: Ohio
Posts: 2,148
Default

It is very hard to move the bulk of a large quilt as compared to moving a baby or twin quilt. The weight of a large quilt will way it down making it harder to move. Also using pins will add to the weight of the quilt making it hard to move. Actuall I use 505 spraybasting.. I am one who used the foam made into a extension table and really like it. It supports the quilt if you pile it up so quilt does not hang down. Also it is hard work to quilt a large quilt- do not let anyone tell you otherwise.

also it is important to use gloves that have "dots" on them that help you move the quilt. Also make sure you feed dogs are completely down when doing FMQ. As for SID- I use invisibkle thread on the top so my stitches are not easily seen.

Here is the link for the cheap sewing table. note- you can take this down if you want but I have the room to keep it up all the time. It is a great work surface all the time.

http://www.youtube.com/watch?v=g14govA4pIM
bigsister63 is offline  
Old 03-12-2014, 09:33 AM
  #14  
Power Poster
 
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Default

I found that standing up to quilt relieves a lot of stress from my shoulders and back. Had a lot of physical problems when quilting sitting down; tried a back brace, etc. When quilting standing up I found that all of those problems went away, which meant I could quilt for longer periods of time without having to worry about problems the next day.
Prism99 is offline  
Old 03-12-2014, 09:54 AM
  #15  
Super Member
 
Join Date: Feb 2014
Location: Wis
Posts: 5,928
Default

Yes the gloves work great along with the other tips above. Good luck! There is nothing more frustrating than a quilt that won't go where you want when FMQ'ing
Doggramma is offline  
Old 03-13-2014, 05:14 AM
  #16  
Power Poster
 
Jingle's Avatar
 
Join Date: Dec 2009
Location: Outside St. Louis
Posts: 38,211
Default

To do FMQ, lower the feed dogs, lessen the pressure on the foot, turn all the way up. Wear gloves, I use the garden gloves with the rubber nubs. I use a 2x4' folding table on my left side to hold the excess quilt, to take the drag off it. Make sure you have enough quilt puddles around machine to prevent drag or it getting caught on a corner or something. I do all of this when I quilt.
Jingle is offline  
Old 03-13-2014, 05:42 AM
  #17  
Super Member
 
Join Date: Jul 2010
Posts: 6,430
Default

I put two ironing boards at my DSM. Both have boards on them. One is in front of my machine and the other is at my left hand side, both the height of my sewing machine cabinet. I use Machingers gloves as well.
carolynjo is offline  
Old 03-13-2014, 06:56 AM
  #18  
Junior Member
 
Join Date: Oct 2012
Posts: 144
Default

You can use car wax on the table to make it slide easier...


QUOTE=romille;6621786]I am still pretty new at quilting, so I could use your help figuring out what I am doing wrong.

I have a twin sized quilt that I am trying to quilt, but am having a heck of a time getting the quilt to move well. This is the largest quilt I have ever done. I did two quilts on my old machine, and didn't have this issue, although those were crib and lap sized. The first quilt was stitch in the ditch, the second was a meander.

I did two crib quilts on my new machine as well, one in the hoop and one with just straight lines. I was excited to quilt this one, but I am just having trouble getting it to move. I tried in the ditch, and am having trouble keeping the stitches in the ditch (despite buying the STITD foot) because the quilt just doesn't want to move well. I also tried moving it around free motion, but it is just stubborn.

I had a sew steady table on the old machine, so I thought maybe it would help if I got one for the new one; I ordered the "giant" table, but it didn't come with a polishing kit so it isn't quite as slippery as my last one. I will have to pick up something to make it slippery-er soon.

My new machine is taller... maybe that is part of the problem? I don't have a proper sewing table, so I have been camping at the kitchen table... and now that I have replaced my tiny Bernette with a Pffaf Creative Performance things are a bit higher up.

Would rearranging my house to fit a real sewing table help?? I need to do this anyway, I just haven't figured out how I want to redo things to find the room for a proper sewing area. I think I just need a new house!

Should I get one of those slippery mats like the Supreme Slider?[/QUOTE]
BillieJean is offline  
Old 03-13-2014, 07:06 AM
  #19  
Super Member
 
klgls's Avatar
 
Join Date: Feb 2012
Location: Kansas
Posts: 1,599
Default

The Supreme Slider and Machingers Gloves really made a difference in my FMQ - so much easier. I "puddle" too and make sure the quilt is supported and not hanging off anywhere.
klgls is offline  
Old 03-13-2014, 07:12 AM
  #20  
Power Poster
 
Join Date: Mar 2013
Location: Corpus Christi, Tx.
Posts: 16,105
Default

never heard of an oven liner! I use a shower curtain liner and I puddle.
Originally Posted by quiltin-nannie View Post
I had the same problem until I bought an oven liner and a pair of garden gloves! I place the oven liner down, mark where my needle will enter and put a quarter inch hole there. I do use a little scotch tape on a couple places to keep it from shifting. My garden gloves help me move the quilt. Problems solved for under $10!
tessagin is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jrhboxers
Links and Resources
11
01-19-2014 07:16 AM
karenpatrick
QB Help Center
11
03-19-2012 08:04 PM
carolaug
Links and Resources
13
10-13-2011 06:10 AM
BabyCakes
Main
15
06-30-2011 10:30 PM
BeSue
Links and Resources
2
07-27-2010 10:00 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter