Go Back  Quiltingboard Forums >
  • Main
  • Taking a sewing machine on a plane >
  • Taking a sewing machine on a plane

  • Taking a sewing machine on a plane

    Thread Tools
     
    Old 04-15-2014, 06:04 PM
      #1  
    Senior Member
    Thread Starter
     
    Join Date: Oct 2011
    Posts: 357
    Default Taking a sewing machine on a plane

    I know this was a topic on this board awhile back, but I can not find it, so I will post another one. I have volunteered to house sit for my sister this summer. I am looking forward to the "alone" time and want to take my sewing machine on the plane. It is a very expensive machine. My plan is to take it as a carry on. I do have super sized bubble wrap. I need to check sizes for carry on. Has anyone done this? I would appreciate any input.
    SuzieQuilts is offline  
    Old 04-15-2014, 06:14 PM
      #2  
    Senior Member
     
    Join Date: Sep 2012
    Posts: 512
    Default

    I took my sewing machine (Bernina 131) on a flight. The flight attendants thought I was crazy and wouldn't store it upright. I had to put it on it's side in the overhead bin. I would not take my Bernina 830 on a plane. I would probably purchase a "take to class" smaller machine. I'm also 5' so in order to get my sewing machine in the overhead bin, I had to stand on the seat and then lift it up and in the bin.
    Zinda is offline  
    Old 04-15-2014, 06:20 PM
      #3  
    Super Member
     
    Join Date: Oct 2011
    Location: dallas tx.
    Posts: 5,172
    Default

    Half of the time, the overheads are full before you get on the plane. People who travel all the time get on first if they can and use the overheads wherever they want. I sure wouldn't take a good one on. I would purchase an oldie that will take it and use it. They will cram it anywhere they can find a place. JMHO
    barny is offline  
    Old 04-15-2014, 06:25 PM
      #4  
    Power Poster
     
    Join Date: Dec 2010
    Location: Michigan
    Posts: 11,276
    Default

    What are you going to be working on? If it's just piecing, would get a small 'take to class' machine. I would probably get it from AllBrands and just have it shipped to my sister's house. Save all the packaging and when you are ready to return, repack & ship it back. It's worth the price of shipping not to have to deal with it on the flight.
    Another option would be look for a used machine when you get there, and leave it for your sister.
    I personally would not try to carry a machine on, especially an expensive one.
    PaperPrincess is offline  
    Old 04-15-2014, 06:56 PM
      #5  
    Junior Member
     
    Join Date: Oct 2013
    Posts: 290
    Default

    Check with the airlines. With all of the new rules I doubt they will let you take it.
    Auntie V is offline  
    Old 04-15-2014, 06:58 PM
      #6  
    Super Member
     
    Join Date: May 2011
    Location: Pacific NW
    Posts: 9,591
    Default

    I belive Bonnie Hunter takes a Featherweight as a carry-on all the time. I think she had a bad experience when she checked a machine once.
    Peckish is offline  
    Old 04-15-2014, 07:33 PM
      #7  
    Super Member
     
    Join Date: Aug 2010
    Location: Tampa Bay Area, Florida
    Posts: 2,229
    Default

    I've taken my little Brother on a plane a few times- but would never take my Elna!
    Cybrarian is offline  
    Old 04-15-2014, 07:38 PM
      #8  
    Super Member
     
    Join Date: Apr 2010
    Location: Illinois
    Posts: 9,312
    Default

    You need to first check what type of plane. Small regional jets have a very small overhead space. Just barely big enough for a lap top case. The underseat area is also very small on the regionals.

    Some airlines offer an advance boarding for a fee. Southwest is one that does it , for $12 or maybe $15.oo each way you can advance board , but you must pay this ahead of the flight. If you are flying this airline pay this fee now , if you purchased your ticket to secure the advance boarding. Do note that it will not fit in most overheads in the upright position, and you will most likely have to lay it on its side.

    Last edited by Lori S; 04-15-2014 at 07:40 PM.
    Lori S is offline  
    Old 04-15-2014, 07:57 PM
      #9  
    Super Member
     
    Join Date: Aug 2011
    Location: Valley of the sun, AZ
    Posts: 1,070
    Default

    Now those are the best ideas!
    Originally Posted by PaperPrincess
    What are you going to be working on? If it's just piecing, would get a small 'take to class' machine. I would probably get it from AllBrands and just have it shipped to my sister's house. Save all the packaging and when you are ready to return, repack & ship it back. It's worth the price of shipping not to have to deal with it on the flight.
    Another option would be look for a used machine when you get there, and leave it for your sister.
    I personally would not try to carry a machine on, especially an expensive one.
    love to sew is offline  
    Old 04-16-2014, 02:33 AM
      #10  
    Super Member
     
    Join Date: Jul 2012
    Location: Morris Plains, NJ
    Posts: 1,803
    Default

    I have a Pfaff Passport which is lightweight (13lbs) and small which I would consider as my carry on. I would plan to do piecing projects and do the quilting when I got home.
    Maureen NJ is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    SuzieQuilts
    Main
    20
    07-15-2014 02:58 PM
    SuzieQuilts
    Main
    2
    05-28-2014 08:42 AM
    Pagzz
    Main
    32
    02-08-2014 06:22 PM
    DottyD
    Main
    39
    03-19-2013 10:08 PM
    Bluelady
    Main
    25
    11-15-2010 10:56 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter