Go Back  Quiltingboard Forums >
  • Main
  • A designing question about quilt borders >
  • A designing question about quilt borders

  • A designing question about quilt borders

    Thread Tools
     
    Old 06-04-2014, 03:54 AM
      #1  
    Junior Member
    Thread Starter
     
    Join Date: Oct 2012
    Location: at the foot of the Ouichita Mountains, SE Oklahoma
    Posts: 273
    Default A designing question about quilt borders

    I have been designing my own quilts for a short time now. As I design I make the decision concerning border widths, as well as whether there will be more than one - say a narrower inner border, in addition to a wider border.

    The problem is that as I make the quilt, I sometimes have to change my widths because my original idea doesn't look 'quite right'.

    Is there a formula for calculating how wide borders should be in relationship to the size of the middle section? I think I read somewhere that there was, but can't remember where I read it nor what the article said.

    Of course, I know that formulas rules are broken per the designers desire, but think it would be helpful to have a starting point.

    Thanks in advance.
    dray965 is offline  
    Old 06-04-2014, 03:56 AM
      #2  
    Super Member
     
    HillCountryGal's Avatar
     
    Join Date: Jul 2012
    Location: The beautiful Texas hill country.
    Posts: 1,265
    Default

    I too design as I go along. So far, it's just a matter of how it looks to my eye ... if it's balanced, etc. If there's a formula, I've never heard of it.
    HillCountryGal is offline  
    Old 06-04-2014, 04:18 AM
      #3  
    Super Member
     
    Billi's Avatar
     
    Join Date: Nov 2013
    Location: Green Valley AZ
    Posts: 2,574
    Default

    Originally Posted by HillCountryGal
    I too design as I go along. So far, it's just a matter of how it looks to my eye ... if it's balanced, etc. If there's a formula, I've never heard of it.
    My thought exactly. I start with a cut that's in the quilt, if I had a lot of 21/2 inch cuts I look at that first. Typicaly my borders graduate in size 2-4-6 or something similar. That's just where I start I change it up a lot sometimes the fabric pattern is more of a consideration than the blocks in the top.
    Billi is offline  
    Old 06-04-2014, 04:18 AM
      #4  
    Power Poster
     
    Join Date: Jun 2011
    Location: Southern California
    Posts: 19,127
    Default

    Originally Posted by HillCountryGal
    I too design as I go along. So far, it's just a matter of how it looks to my eye ... if it's balanced, etc. If there's a formula, I've never heard of it.
    I agree with HillCountryGal. There is no formula. I have bee quilting for over 25 years, so when I have what I consider a balance border, I keep a remnant from the border and keep it for further reference. My border in my avatar was NOT what was included in the published design. It was of my own making.

    What you can do is to place the quilt on the design wall and audition the widths and color placement that you think will look pleasant. I take a photo of each one to remember the placement. Usually one will click and I then go with that one. I had a difficult time selecting the color for this Bargello. I actually changed my mind after I had sewn most of the strips. So the border was even more difficult to decided. Just thought I would post this picture so you can see what I did to audition the border. This was also an original Bargello design I made for a special friend.
    Attached Thumbnails Click image for larger version

Name:	Bargello Wall Quilt.JPG
Views:	699
Size:	77.0 KB
ID:	477823  
    ManiacQuilter2 is offline  
    Old 06-04-2014, 11:14 AM
      #5  
    Power Poster
     
    Join Date: Dec 2010
    Location: Michigan
    Posts: 11,276
    Default

    If the borders aren't pieced, I usually finish the center, then just lay it on my chosen fabrics to audition. You can move the fabrics back and forth to see how a wider/narrower strip will work, then decide. If you get one you like, write down the dimensions and take a photo before you try again.
    PaperPrincess is offline  
    Old 06-04-2014, 11:24 AM
      #6  
    Member
     
    Join Date: Mar 2014
    Posts: 81
    Default

    I have made quilts without borders...And as I lean towards making my own designs and more modern approach to quilting, I find myself rethinking borders - Do I really need them? Does the border enhance the quilt or does it distract from the focus? Just a few thoughts...
    Preeti is offline  
    Old 06-04-2014, 11:31 AM
      #7  
    Senior Member
     
    Terri D.'s Avatar
     
    Join Date: Mar 2014
    Posts: 462
    Default

    One basic rule of thumb that often works is to use a multiple of the block width. So if the block is 8", you could have a 1" or 2" inner border, followed by a 4" outer border. A 12" block would offer a 1", 2" or 3" inner border and a 4" or 6" outer border. Bottom line, if things look proportional, you're probably good to go.
    Terri D. is offline  
    Old 06-04-2014, 12:10 PM
      #8  
    Power Poster
     
    Join Date: May 2008
    Location: MN
    Posts: 24,474
    Default

    Originally Posted by PaperPrincess
    If the borders aren't pieced, I usually finish the center, then just lay it on my chosen fabrics to audition. You can move the fabrics back and forth to see how a wider/narrower strip will work, then decide. If you get one you like, write down the dimensions and take a photo before you try again.
    This also works for me.

    I have learned to RESERVE fabrics for a border - but NOT to cut them until I am ready for them!
    bearisgray is online now  
    Old 06-04-2014, 12:43 PM
      #9  
    Power Poster
     
    Join Date: Feb 2009
    Location: Northern Michigan
    Posts: 12,861
    Default

    Recommendations often are the border widths should divide into the block size...12" blocks can *handle* borders that are 2", 3", 4", and 6" wide and look balanced... Borders that do not {go into} the center components tend to look ~unbalanced~
    ckcowl is offline  
    Old 06-04-2014, 03:28 PM
      #10  
    Senior Member
     
    Pagzz's Avatar
     
    Join Date: Jul 2013
    Location: Dallas, TX
    Posts: 677
    Default

    There is actually a formula. this blog post explains it http://www.hongkiat.com/blog/golden-...-moden-designs
    Pagzz is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    gellybean402
    Main
    10
    05-15-2015 10:05 AM
    craftybear
    Links and Resources
    1
    10-24-2011 10:22 AM
    dmarina
    Main
    2
    07-30-2011 01:41 PM
    craftybear
    Links and Resources
    8
    02-18-2011 06:54 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter