Go Back  Quiltingboard Forums >
  • Main
  • Diamond lattice trouble >
  • Diamond lattice trouble

  • Diamond lattice trouble

    Thread Tools
     
    Old 03-08-2015, 08:58 AM
      #1  
    Junior Member
    Thread Starter
     
    Join Date: Sep 2012
    Posts: 109
    Default Diamond lattice trouble

    I am attempting to sew a diamond lattice quilt like this: http://www.lindafranz.com/blog/jane-austen-quilt/

    I have made numerous attempts over the past year, trying some versions with little diamonds in each corner of the lattice, some without the diamond corners. I have tried every logical way I can think of to sew this diamond lattice, have used 45 degree diamonds as well as 60 degree diamonds in case that made a difference.

    No matter what I do, how much I measure, pin etc etc, I get lots of bunching and wobbling along the lattice. It's just too much for my taste as it looks like careless sewing.

    Is there a technique that I might not have encountered online or thought of myself to get this lattice to lie flat?

    Thank you for any ideas!

    Lainey
    lainealex is offline  
    Old 03-08-2015, 10:15 AM
      #2  
    Super Member
     
    PenniF's Avatar
     
    Join Date: Jun 2012
    Location: North Texas formerly The Burgh
    Posts: 3,392
    Default

    It sounds like you are having bias edge issues. Some solutions are starch starch starch until the piece is quite stiff....(i make my own starch with 1/2 liquid starch and 1/2 water in a spritzer bottle)......use washable glue dabs to "baste" the pieces together AND overly pin the parts to keep them from moving.....use a walking foot to help you not stretch the fabric.
    Maybe this is not the problem....but that was my first thought RE: the problem.
    GOOD LUCK !! it's a beautiful pattern so i hope you find the right solution.
    PenniF is offline  
    Old 03-08-2015, 10:51 AM
      #3  
    Junior Member
    Thread Starter
     
    Join Date: Sep 2012
    Posts: 109
    Default

    I've quilted for a while but never used starch - will the bias edges stretch after I wash the quilt once it's sewn? Or once you sew it they stay flat?

    Lainey
    lainealex is offline  
    Old 03-08-2015, 11:44 AM
      #4  
    Super Member
     
    Join Date: May 2011
    Location: Pacific NW
    Posts: 9,444
    Default

    Starch BEFORE you cut. If you starch after you cut, you run the risk of shrinking your pieces, and then they won't fit anymore. I learned that one the hard way.

    The bias edges, once sewn, won't stretch. The sewing and quilting will prevent that.
    Peckish is offline  
    Old 03-08-2015, 11:46 AM
      #5  
    Super Member
     
    Join Date: Sep 2011
    Location: Southern Indiana
    Posts: 5,052
    Default

    Thats when I start hand piecing!
    Jackie Spencer is offline  
    Old 03-08-2015, 12:29 PM
      #6  
    Power Poster
     
    Join Date: Jun 2011
    Location: Southern California
    Posts: 19,127
    Default

    I usually revert to PP when dealing with bias edges. Print out your diamond shape and using the glue stick lightly to attach the paper to the wrong side of the fabric. Cut your diamond. If your seams are accurate, everything should match up. If you are the width of a pin off, your seam allowances will be off. Diamonds require absolute perfection. Good luck.
    ManiacQuilter2 is offline  
    Old 03-08-2015, 12:30 PM
      #7  
    Power Poster
     
    Join Date: Dec 2008
    Location: Western Wisconsin
    Posts: 12,930
    Default

    Agree -- heavy starch the fabric before you cut. A half-and-half solution of Sta-Flo liquid laundry starch and water works well. I "paint" this solution onto yardage, allow a couple of minutes for the fibers to absorb the starch, then toss in dryer and iron with steam. Starch stabilizes the fabric so bias edges are less likely to distort from handling; however, you still need to be careful with how you handle those edges. I would starch the sashing fabric as well as the fabric that will be cut into diamonds. Incidentally, starch also helps with machine quilting to prevent unwanted tucks and puckers, especially if you starch the backing fabric as well as the top.
    Prism99 is offline  
    Old 03-08-2015, 01:07 PM
      #8  
    Super Member
     
    Join Date: Jun 2008
    Location: Utah
    Posts: 8,844
    Default

    I have the Jane Austen book and they did it in squares set on point rather than diamonds. It still gives the effect but would be much easier.
    quiltsRfun is offline  
    Old 03-08-2015, 01:46 PM
      #9  
    Super Member
     
    jclinganrey's Avatar
     
    Join Date: Jul 2012
    Location: Orange County, CA
    Posts: 3,040
    Default

    Maybe this might help.

    http://www.favequilts.com/Quilts-For...from-Accuquilt


    Jane
    jclinganrey is offline  
    Old 03-08-2015, 03:42 PM
      #10  
    Junior Member
    Thread Starter
     
    Join Date: Sep 2012
    Posts: 109
    Default

    Everyone has been extremely helpful, thank you all. I got some starch today and have managed to make one strip of diamonds with lattice. It sure is flat. Basically acting like paper.

    I'm still not sure what will happen as I sew one strip to the next as the bias ribboning seems to accumulate as I sew more and more strips. But here's hoping...

    Lainey
    lainealex is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    sdeaaz
    Main
    12
    05-20-2017 05:19 PM
    karenpatrick
    QB Help Center
    11
    03-19-2012 08:04 PM
    sondray
    Links and Resources
    0
    05-04-2008 07:19 AM
    sondray
    Links and Resources
    0
    04-17-2008 03:43 AM
    Steve
    Main
    5
    01-26-2008 08:51 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter