Prism99

The LemiShine I got from Walmart came in a baggie-like container. Here's a link to the same stuff in a regular container; read the reviews:
http://www.walmart.com/ip/Lemi-Shine...12-oz/15724190

I just dissolve some in water and place it around the base of the faucets and use a sponge to apply to the faucets themselves. If you run it through your dishwasher, just make sure you don't have any expensive enamel casserole dishes in there; this stuff eats enamel! My kitchen countertops are quartz and it's no problem for quartz.

lynnie

we have the same Moen, but the granite is hard to clean the hard water off

Angellight

I actually was looking for how to clean soap scum out of my shower today. The recommended product was the liquid Bartender's friend. The results were good for both scum and hard water according the google search.

Susan

L

Neesie

Bartender's Friend is a very mild abrasive and works wonders. I also have brushed nickel and very hard water. What I find really helps, is (after cleaning) to use a bit of chrome polish (made for cars) on the faucet. Even wiping it with a bit of oil, will help keep it nice longer.

Jingle

I use Lime away or straight CLR. I clean the minerals build up in the toilet with it also. I put it on a rag and just keep rubbing until they are gone. It doesn't take long. I use toilet cleaner and it colors the minerals but doesn't remove them. We have very hard water.

coopah

We live across from a limestone pit...I've found a used dryer sheet moistened with water is mildly abrasive,but whatever is in the dryer sheet cuts all the crud at the base of the sink fixtures. We also use it for pots with burned on foods. Just put the dryer sheet in the pan (after it has cooled, of course), add water, let sit overnight...use the dryer sheet the next day as a scrubby, and viola'! Burn junk is gone! Dryer sheets do a lot of things...we store the used ones in an empty tissue box.

OrangeSherbet

I have used regular run of the mill hydrogen peroxide. Takes the mineral marks off easily.

onaemtnest

[QUOTE=coopah;7125745]We live across from a limestone pit...I've found a used dryer sheet moistened with water is mildly abrasive,but whatever is in the dryer sheet cuts all the crud at the base of the sink fixtures. We also use it for pots with burned on foods. Just put the dryer sheet in the pan (after it has cooled, of course), add water, let sit overnight...use the dryer sheet the next day as a scrubby, and viola'! Burn junk is gone! Dryer sheets do a lot of things...we store the used ones in an empty tissue box. [/QUOTE

I think it may have been here I learned of the dryer sheet for stubborn baked foods on pans or baking dishes like after scalloped potatoes! All I can say is WOW it has made clean up a wonder, I find I don't have to leave it soak overnight, just a short time and it loosens baked on food.

I too use dryer sheets for cleaning my brushed nickel fixtures. I also use dryer sheets for cleaning adhesives from my iron sole plate. I just take a used dryer sheet or two and run a hot iron back and forth over the dryer sheet, no more of the expensive tube of chemical iron sole plate cleaner for me. Again a tip learned on this board, I'm sure.

I will be trying it to clean the base of fixtures per your suggestion! PLUS like the tip of using a used tissue box for storage.

Lady Diana

I wouldn't use polident or any abrasive. Try several sprays of vinegar, or a cloth soaked in vinegar. Place around faucet, It could take several applications. My Mom thought her new sink/cabinet in the bathroom was defective....at least the porcelain bowl part of it. There was a discoloration only where the water must have dripped....the line went down to the hole in the sink.....I brushed my finger over it and thought, this isn't a flaw...went to her kitchen got a rag, soaked it with vinegar and placed it over the stain.....after only five minutes, I rubbed it off. It was mineral build up. I use vinegar at my house now, all the time for cleaning around faucets.

RAChhap

We just intslled brushed nickel and our directions say to wash with warm soapy water and the DRY with a soft cloth.
It specifically mentioned lime and said do not use any commercial product or you void the warranty. In our former home I used a few drops of mineral oil on a soft cloth and that brightened them up.