Tape down Supreme Slider for FMQ?
#2
Member
Join Date: Jul 2010
Location: Rochester,N.Y.
Posts: 91
![Default](/images/icons/icon1.gif)
From my experience TAPE IT because I sewed mine to my quilt and even with removing the stitches ,I reordered because
the holes kept hanging up my movement. Same thing happened to my mom. Use painters tape it works great!
the holes kept hanging up my movement. Same thing happened to my mom. Use painters tape it works great!
#5
Super Member
Join Date: Oct 2015
Location: Va.
Posts: 5,752
![Default](/images/icons/icon1.gif)
I've had one slip and ended up sewing it to the quilt. I'm not sure if it was because the back was linty, or it had to do with the materials the machine was made of. At this point I can't remember if I was using it on my VX560 (all metal vintage machine) or the PC420 (all plastic casing) when it slipped.
I do remember that at the time I was not amused and ended up taping it down for a good while whenever I was FMQing--but it was a pain to get to the bobbin when it was taped down.
I've never had the slider slip when using it on my PQ1500s and I don't tape it down on that machine BUT I always make sure that it is nice and clean on the back before I apply it to my machine. BTW I'm still using the one that was sewed to the quilt, over the years it has developed quite a rip, but that doesn't seem to affect its performance as long as I put the rip to the left of or behind the needle.
That said, you might want to put it on the machine you use for FMQ and see if you can move it with your hands. It may be that the sliders stick better to some machines than others. Also, if you don't have good support to the left and behind the machine and are fighting against the weight of the quilt hanging off an edge, you could possibly cause a slider to slip simply by pressing down too hard as you try to move the quilt around.
Rob
![EEK!](https://cdn.quiltingboard.com/images/smilies/eek.png)
I've never had the slider slip when using it on my PQ1500s and I don't tape it down on that machine BUT I always make sure that it is nice and clean on the back before I apply it to my machine. BTW I'm still using the one that was sewed to the quilt, over the years it has developed quite a rip, but that doesn't seem to affect its performance as long as I put the rip to the left of or behind the needle.
That said, you might want to put it on the machine you use for FMQ and see if you can move it with your hands. It may be that the sliders stick better to some machines than others. Also, if you don't have good support to the left and behind the machine and are fighting against the weight of the quilt hanging off an edge, you could possibly cause a slider to slip simply by pressing down too hard as you try to move the quilt around.
Rob
#8
Junior Member
Thread Starter
Join Date: May 2014
Posts: 189
![Default](/images/icons/icon1.gif)
Rob, I have the PC420PRW too, only had it for a couple of months. I love it. But maybe you can answer my question, I made my first attempt to learn fmq and the front was great but the back was a mess. See pics on thread Free Motion Attempt Gone Wrong. Any advice welcome! I'm afraid to try again.
#9
Super Member
Join Date: Apr 2012
Posts: 1,165
![Default](/images/icons/icon1.gif)
I've stitched through mine a couple of times. Painter's tape is good.
The machine can inadvertently be the culprit. You have to lift up the slider if you are using either a Brother 1500 or Juki 2010 set into the table. The Juki has to have the bobbin cover lifted just to change the bobbin, and the more you disturb, the more likely to slip. I imagine a slider on a top loader would have to be moved, too.
The machine can inadvertently be the culprit. You have to lift up the slider if you are using either a Brother 1500 or Juki 2010 set into the table. The Juki has to have the bobbin cover lifted just to change the bobbin, and the more you disturb, the more likely to slip. I imagine a slider on a top loader would have to be moved, too.
#10
![Default](/images/icons/icon1.gif)
After sewing three into quilts, I started taping my Supreme slider with painter's tape. I had washed my Supreme slider after every use, but sooner or later, I ended up with a slider sewn into my quilt. Now that I tape it, no more problems.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
0
01-30-2011 09:14 PM