Go Back  Quiltingboard Forums >
  • Main
  • cutting strips...how many, what size >
  • cutting strips...how many, what size

  • cutting strips...how many, what size

    Thread Tools
     
    Old 06-15-2016, 12:15 PM
      #1  
    Member
    Thread Starter
     
    Join Date: Oct 2013
    Posts: 3
    Default cutting strips...how many, what size

    I have 29 10"blocks. I want to frame each block with a strip 2 1/2" wide. How long do I cut the strips to frame all the blocks? I don't do math, that is why I am asking. TY
    Ms Match is offline  
    Old 06-15-2016, 01:17 PM
      #2  
    Super Member
     
    Join Date: Apr 2016
    Location: Blue Ridge Mountians
    Posts: 7,075
    Default

    what is the layout? are any of the blocks sharing a frame? Sketch the entire layout with the finished boarder, take a picture and upload it so we can see.
    Jane Quilter is offline  
    Old 06-15-2016, 01:25 PM
      #3  
    Super Member
     
    Join Date: Oct 2010
    Location: Nebraska
    Posts: 3,253
    Default

    I don't like to do math, either, that's one of the reasons I use patterns I'm sure someone here will be happy to tell you though.
    suern3 is offline  
    Old 06-15-2016, 02:11 PM
      #4  
    Power Poster
     
    Join Date: Dec 2008
    Location: Western Wisconsin
    Posts: 12,930
    Default

    Do you want to frame each block before putting them together? So you end up with 4" between blocks when they are sewn together? Or do you want a 2" strip of sashing between blocks when they are all sewn together? Makes a difference.
    Prism99 is offline  
    Old 06-15-2016, 05:33 PM
      #5  
    Senior Member
     
    Join Date: Sep 2013
    Location: Saskatchewan
    Posts: 838
    Default

    I'm assuming you want a frame all the way around the block. Cut two strips 2.5" x 10", and attach them to opposite sides of the 10" square (blue strips in diagram below). Then cut two strips 2.5" x 14", and attach them to the top and bottom (green strips in the diagram). You will end up with a block 14x14" (13.5 x 13.5" finished).

    [ATTACH=CONFIG]552298[/ATTACH]
    Attached Thumbnails Click image for larger version

Name:	frame.JPG
Views:	1375
Size:	18.4 KB
ID:	552298  
    Jennifer23 is offline  
    Old 06-16-2016, 12:39 AM
      #6  
    Super Member
     
    Join Date: Apr 2016
    Location: Blue Ridge Mountians
    Posts: 7,075
    Default

    For the non math oriented: (to make it look like the picture above) Use the sew and trim method:
    1) Side Frames: Pick a strip longer than the block. Sew it to the Left side. Trim anything longer than the block. Repeat for Right side of block. Press.
    2) Top/Bottom Frames: Pick a strip longer than the top edge of the block with the left and right frame attached. Sew it to the top (which is now the left frame edge, the top block edge, and the right frame edge) . Trim anything longer than the sewing line. Press. Repeat for Bottom Edge.

    Last edited by Jane Quilter; 06-16-2016 at 12:42 AM.
    Jane Quilter is offline  
    Old 06-16-2016, 03:28 AM
      #7  
    Super Member
     
    Join Date: Feb 2013
    Posts: 2,657
    Default

    How about strip piecing/sewing the sides, then cut them apart? Then do the same for the tops and bottoms? If you want two blocks to share the same sashing, them only strip sew every other one.
    Misty's Mom is offline  
    Old 06-16-2016, 05:51 AM
      #8  
    Power Poster
     
    Join Date: Jun 2011
    Location: Southern California
    Posts: 19,127
    Default

    This is why I love my EQ7 program. Yes, it over estimates the fabric calculation but it is better than trying to add up all those strips.
    ManiacQuilter2 is offline  
    Old 06-16-2016, 06:31 AM
      #9  
    Super Member
     
    Join Date: Jul 2012
    Location: Morris Plains, NJ
    Posts: 1,802
    Default

    Jennifer23's description of how to do it was perfect...but cut the strips 14 1/2", not 14". Block will finish at 14" when blocks are sewn together. My question. How will you lay it out for 29 blocks? If you have 5 blocks wide by 6 blocks length, you will need 30 blocks. It will make a 70" x 84" finished quilt.
    Maureen NJ is offline  
    Old 06-16-2016, 06:35 AM
      #10  
    Super Member
     
    GramE's Avatar
     
    Join Date: Feb 2016
    Location: Bunker Hill, In
    Posts: 1,912
    Default

    Isn't QUILTINGBOARD amazing! It even does math!
    GramE is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    wildyard
    Main
    104
    02-10-2011 09:32 AM
    nursie76
    Main
    183
    01-30-2011 05:18 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter