Spray, glue, pin, hand baste, or boards? Which one do you prefer?
10-27-2016, 07:31 AM
#41
Power Poster
Join Date: Nov 2009
Location: Mableton, GA
Posts: 11,204
Originally Posted by annette1952
I tried Elmers but it didn't seem to stick very well. I must be doing something wrong. I'm getting ready to sandwich one today so I'll try again. Normally I use Sullivans spray which works very well but it is expensive. I try to get it on sale when possible. Thanks everyone for all the great info
10-27-2016, 08:24 AM
#42
Super Member
Join Date: Feb 2012
Location: Phoenix, AZ
Posts: 2,877
Originally Posted by Stitchnripper
Yes, usually Elmer's washable school glue that is white. It seems to dry clear, but in the sandwich I can't tell. Please try the glue on a sample. I wonder why people are "afraid" of it. It is cheap, nontoxic, many of us say it doesn't gum up a needle if you let it dry, it has always washed out, etc. Just try it on a sample and let it dry and see how you like it. also, it replaces pin basting, not spray basting, in my opinion, so I don't dilute it or spray it on or paint it on. Just a thin line in a sort of grid pattern. Sometimes I do a meandering pattern. It stays until it is washed out. I'm working on a quilt now and the machine is having zero problems with the glue. I'm having problems with the thread, first time using this kind, but, it is hard to even know the sandwich is held together with glue. If you squeeze out a glob just smooth it with your finger. It washes off easily!! Please try it and let us know!!!
10-27-2016, 08:27 AM
#43
Moderator
Join Date: Jun 2008
Location: Camarillo, California
Posts: 35,242
I spray baste all my quilts. I use 505 spray. I never pin. Sometimes the quilts sit for weeks (a couple - months-years) Occasionally on an old one I respray just the corners.
I will never go back to pinning.
I am fortunate that I have keys to our church and can go over and push tables together to baste. That and I have friends to help me. Never have to get on the floor (not sure i could get up if I did)
I will never go back to pinning.
I am fortunate that I have keys to our church and can go over and push tables together to baste. That and I have friends to help me. Never have to get on the floor (not sure i could get up if I did)
__________________
My newest Grandson, Caleb Austin, was born May 29th. I am now Grandma to 4 precious babies. I am so blessed!!!!
My newest Grandson, Caleb Austin, was born May 29th. I am now Grandma to 4 precious babies. I am so blessed!!!!
10-27-2016, 08:43 AM
#44
Super Member
Join Date: Oct 2010
Location: Colorado
Posts: 2,254
I love spray basting for larger projects, no shifting of the sandwich and it stays that way until I'm finished. The good old safety pins are great for smaller projects, even though it takes a month of Sundays to get them the way I want it as I tend to overdo. So in short, spray basting is my cup of tea.
10-27-2016, 01:18 PM
#45
Super Member
Join Date: Jul 2010
Posts: 6,430
I use the safety pin method also. I don't like the spray method. I place a half sheet of plywood (vertical half) on my ironing board. I spread out the backing, smooth out the batting, and then smooth out the front. I pin the part on the board. Then I move the center section to one side and repeat the process on one side and the far side. I can no longer get down on the floor to baste, so this is what I figured out. I have also basted on the wall as if the quilt parts were a design wall. That works for me, too.
10-27-2016, 01:57 PM
#46
Super Member
Thread Starter
Join Date: Sep 2010
Location: Southern, Utah
Posts: 1,233
Thank you, thank you, thank you everyone! There is absolutely no other place where the response is so good!!!
I'm still thinking I'll try the school glue just because that is one I have not done much of. The last quilt was pin basted and took me a long time. I'm wanting to get these last few tops sandwiched. Bless this craft of ours, and each one of you.
I'm still thinking I'll try the school glue just because that is one I have not done much of. The last quilt was pin basted and took me a long time. I'm wanting to get these last few tops sandwiched. Bless this craft of ours, and each one of you.
10-27-2016, 02:03 PM
#47
Super Member
Join Date: Feb 2011
Location: Fairfield, OH
Posts: 3,694
I saw online to put it on your design wall and spray baste it that way. I set up some insulation board on the basement on the wall. I covered it with an old sheet and I put the back on it first. I just stick some pins thru the back into the insulation board to hold it up. I spray it and start layering. So much easier than a table or the floor. I can do up to a queen size this way. No crawling on the floor or stretching across the table. If the sheet gets sticky I just throw it into the washing machine.
10-27-2016, 02:07 PM
#48
Power Poster
Join Date: Jul 2010
Location: PA
Posts: 10,704
Originally Posted by katier825
LOL I usually dread it too, especially for larger quilts. For lap size or smaller, I use the boards like in Sharon Schamber's video, but I spray baste, not hand baste. The fabric is easier to handle if you cover the boards with flannel first. I just used a staple gun to attach the flannel to the boards.
10-28-2016, 08:26 AM
#49
Senior Member
Join Date: Apr 2010
Location: La Verne, CA
Posts: 794
I use spray basting. It works great and is very fast. I use washable glue on baby quilts. I'm not comfortable using spray basting because I afraid is may be toxic.
I'm usually working on more than one quilt so I can use glue on one and let it dry over night while I'm working one another quilt.
I'm usually working on more than one quilt so I can use glue on one and let it dry over night while I'm working one another quilt.
10-30-2016, 12:33 PM
#50
Super Member
Join Date: Jun 2010
Location: Clinton, OK
Posts: 1,736
I dreaded this part...UNTIL I found Sharon Schamber's method...now it's not a problem! Even though it takes a bit of maneuvering (what quilt project doesn't require this!!??), it's a great method and really works.
However, for very small quilts (wall hanging size and smaller) I usually spray or pin...
Sure love that board method though!
However, for very small quilts (wall hanging size and smaller) I usually spray or pin...
Sure love that board method though!
Thread
Thread Starter
Forum
Replies
Last Post
