Lumpy Pattern
#21
Junior Member
Thread Starter
Join Date: May 2019
Location: Wisconsin
Posts: 110
#22
Using the Swirl method, mentioned by a number of posters, works so well. It makes you heart beat the first time you remove a couple of stitches, but the results is simply amazing, flat an you will have the colors going as directed. It may take a couple of blocks to get this technique to feel natural, but it Does work. I made a double sized quilt that was all pinwheels, I had lots of swirling and a beautifully flat, no lump quilt.
Last edited by QuiltnNan; 07-17-2019 at 04:25 AM. Reason: shouting/all caps
#24
Power Poster
Join Date: May 2009
Location: NY
Posts: 10,590
Whenever I have any block with many converging seams in the center (Pinwheel, Lemoyne Star, Kaleidoscope, etc) I do not stitch my final seam edge to edge all the way across. Instead I start at the center, stitch to the edge, remove the block, flip it and then do the other side. This technique offers several advantages.
1. It allows you to start at the multiple seam intersection so no need to remove a few stitches to swirl the center
2. It gives you better control of how that center comes together because you are starting there so those center points all line up correctly without any getting chopped or off kilter
3. It allows you to press that center seam in two different directions to help avoid bulk and lumpy build up.
Joining the units of block this way greatly improves accuracy and greatly reduces frustration. So worth the few extra seconds it takes to sew the seam in two passes instead of one.
Edyta Sitar recommends doing this. You can google her tutes for 8 pointed (Lemoyne) stars to get a visual of what I am talking about. She also describes the technique with lots of photos in many of her books. I learned it from the Scrappy Fireworks book.
1. It allows you to start at the multiple seam intersection so no need to remove a few stitches to swirl the center
2. It gives you better control of how that center comes together because you are starting there so those center points all line up correctly without any getting chopped or off kilter
3. It allows you to press that center seam in two different directions to help avoid bulk and lumpy build up.
Joining the units of block this way greatly improves accuracy and greatly reduces frustration. So worth the few extra seconds it takes to sew the seam in two passes instead of one.
Edyta Sitar recommends doing this. You can google her tutes for 8 pointed (Lemoyne) stars to get a visual of what I am talking about. She also describes the technique with lots of photos in many of her books. I learned it from the Scrappy Fireworks book.
#25
#27
Power Poster
Join Date: May 2009
Location: NY
Posts: 10,590
Feline, is this the video you are referring to? https://www.youtube.com/watch?v=A07cv78uXpY
#28
Super Member
Join Date: Aug 2010
Location: Hamburg,Western New York State
Posts: 4,856
I'm a swirler too. Also, taking out the one or two stitches in the seam allowance side of the centre point helps the swirl. Once that is done, putting the block on a small wooden board, I put just the point of the iron on the wrong side of the centre point to press the heck out of that lump. Then turn over to give a final press.
#29
Super Member
Join Date: Aug 2018
Location: Greater Peoria, IL -- just moved!
Posts: 6,122
Was thinking about this yesterday when I was showing my friend one of my baby quilts that has that same sort of star seam.
If you are going to be doing the quilting on this, I'd avoid trying to go over the lump. It will (most likely) cause you problems again with the lump.
Those centers like that remain pretty hard and lumpy.
If you are going to be doing the quilting on this, I'd avoid trying to go over the lump. It will (most likely) cause you problems again with the lump.
Those centers like that remain pretty hard and lumpy.
Thread
Thread Starter
Forum
Replies
Last Post
cumberlandquiltchick
Main
39
11-01-2010 09:07 AM