Go Back  Quiltingboard Forums >
  • Main
  • Square in a square ruler >
  • Square in a square ruler

  • Square in a square ruler

    Thread Tools
     
    Old 09-25-2020, 07:18 AM
      #11  
    Power Poster
     
    Join Date: May 2008
    Location: MN
    Posts: 24,470
    Default

    I watched part of one of her videos on using that ruler.

    Her method of attaching rectangles to the sides of a square and trimming them down - seems cumbersome - and wasteful of fabric - to me.

    The ruler also looks like something I would have to pay close attention to while using it. Maybe I would put tape on the "where I should line it up" so that I would remember my "target spot".

    I have learned to make "test units" before cutting a zillion pieces - especially where/when triangles are involved. Sometimes cutting that triangle 1/16 inch larger (or smaller) makes the difference from not fitting to fitting almost fitting perfectly. (In my world - "perfect" is a word that is right up there with "always" and "never" - just another of my quirks - it happens occasionally, but not often)

    bearisgray is offline  
    Old 09-25-2020, 09:47 AM
      #12  
    Super Member
     
    Join Date: Dec 2017
    Posts: 1,866
    Default

    I also watched part one of her videos, and like bearisgray, I am struck by her method being pretty wasteful of fabric. (It doesn't have to be - at one point in the video she says that one can use triangle scraps, but she demonstrates the method with rectangle strips and then cuts of good sized pieces, and cuts off even more when she shows how to do two rounds around the center square.)

    I can see that her method can provide good precision, but there are other ways to get that precision. Personally, that video doesn't make me want to switch from my current methods. I found another video where she shows making half square triangles. The amount of fabric wasted seems quite large to me! The method of making them 8 at a time (slightly oversized and then cutting them down to size) has almost no fabric waste and seems like about the same amount of work.

    I find it very interesting to see a quite different approach. I salute people who come up new methods to give people more options of getting the results they want.
    platyhiker is offline  
    Old 09-25-2020, 10:24 AM
      #13  
    Power Poster
     
    RedGarnet222's Avatar
     
    Join Date: Jan 2009
    Location: Reno, Nv
    Posts: 16,523
    Default

    I won a whole set of her rulers and books at a quilt show one year and have yet to have the time to learn it. Sad but true.
    RedGarnet222 is offline  
    Old 09-26-2020, 12:18 PM
      #14  
    Junior Member
     
    Join Date: Jan 2013
    Location: Madison, WI
    Posts: 187
    Default

    I was intrigued by Deb Tucker's square-in-a-square ruler. Her methods have very little waste, and I like the precision of making a unit a bit oversize and cutting it down. You can obviously do it with regular rulers, too...which is the reason I haven't bought hers yet. But having the marks to easily position the ruler is a nice idea.

    However, I realized this week, if you buy a kit you may not have the option to use her method because the kit dictates the size/shape of the fabric provided. But I do like the convenience of having someone else pick out fabrics that go together.
    hray is offline  
    Old 09-26-2020, 12:23 PM
      #15  
    Super Member
     
    juliasb's Avatar
     
    Join Date: Jun 2010
    Location: Waterford Michigan
    Posts: 7,241
    Default

    I have the ruler but have not used it yet. I am still a bit gun shy to trying out the rulers I recently bought. The square in a square is one of them.
    juliasb is offline  
    Old 09-26-2020, 04:21 PM
      #16  
    Senior Member
     
    Join Date: Feb 2013
    Location: South of Chicago, IL
    Posts: 322
    Default Square in a square

    I just watched a video on how to use the ruler. It is a little confusing. I have made these blocks before faster and easier to do.
    dee1245 is offline  
    Old 10-04-2020, 05:10 AM
      #17  
    Junior Member
     
    Join Date: Jul 2010
    Posts: 264
    Default

    I too am a one time user of her ruler/method. Does anyone have suggestions for other uses for this ruler? I am not a fan of 'one trick pony' rulers so don't usually do projects that require a ruler for one technique only.
    IowaStitcher is offline  
    Old 02-03-2021, 10:26 PM
      #18  
    Member
     
    Join Date: Jan 2012
    Posts: 14
    Default

    what is the difference between the original ruler and the new mini one? The packaging looks the same size and I think you can do fewer options with the newer one. Maybe if someone explained how to do it with the easy angle ruler (hint, hint) it would prove to be enough information to get by without her ruler. Could a pineapple block ruler be used? I think I have 2 different brands of those. I was watching the Rebecca Paige Quilting Summit yesterday and the Quilting Cowboy was showing a quilt in his new fabric line that was done with her method. It piqued my interest in them again. I remember when that first came out!
    Thanks for any explanation.
    Hagridsmom is offline  
    Old 02-04-2021, 04:22 AM
      #19  
    Super Member
     
    Join Date: Mar 2011
    Location: Northern Indiana
    Posts: 2,679
    Default

    Originally Posted by platyhiker
    I also watched part one of her videos, and like bearisgray, I am struck by her method being pretty wasteful of fabric. (It doesn't have to be - at one point in the video she says that one can use triangle scraps, but she demonstrates the method with rectangle strips and then cuts of good sized pieces, and cuts off even more when she shows how to do two rounds around the center square.)

    I can see that her method can provide good precision, but there are other ways to get that precision. Personally, that video doesn't make me want to switch from my current methods. I found another video where she shows making half square triangles. The amount of fabric wasted seems quite large to me! The method of making them 8 at a time (slightly oversized and then cutting them down to size) has almost no fabric waste and seems like about the same amount of work.

    I find it very interesting to see a quite different approach. I salute people who come up new methods to give people more options of getting the results they want.
    After looking at the part one video, I remembered that at one time I had this book and ruler. Tried it a couple of times, did not like the results and passed the book and ruler to someone here on quiltboard about 5 or 6 years ago.
    sandy l is offline  
    Old 02-04-2021, 05:50 AM
      #20  
    Super Member
     
    Macybaby's Avatar
     
    Join Date: Jul 2013
    Location: South Dakota
    Posts: 8,145
    Default

    I do mine with the easy angle ruler. I started by drawing out the finished size, then drawing the corner lines and taking my ruler and figuring out what the inner square needs to be (this is important). At one point I had a chart with each size.

    Then I figure out what WOF I need for the corners and cut them with the easy angle ruler method, Hard to explain in writing, but if you've been using it then you'll be familiar with how that works. I'll go 1.4" wider than needed so I can trim. I will finger crease the center square and then line up the point of the triangle with that crease so I'll have it centered for when I trim.

    One word of caution, you are starting out with a square that will end up on point. So if you have lines that you want to end up horizontal on the quilt, you need to cut them bias and then you might want to do the covered corners method.
    Macybaby is offline  

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter