Fiskars Rotary Cutter problem
#21
Member
Join Date: Oct 2021
Posts: 1
Fiskar Rotary Cutter
I am having a problem with my Fiskars Rotary Cutter (the one that comes with the cutting mat and 6x24 ruler). The nut doesn't stay tightened. It loosens up after only about 5 or 6 cuts. Sometimes I'm afraid it will come right off. I love the angle you hold it at, not like the others I've seen. I was thinking it might have been an issue with my specific cutter, so I went and bought another one just like it. Once I change the blade, I have the same problem. I have been very careful when taking it apart to make sure I'm putting it back together correctly. Has anyone else had a problem?
#22
Super Member
Join Date: Jan 2014
Location: Central NM
Posts: 1,582
This is how to get it replaced for free. Here's the link for customer service.
https://www.fiskars.com/en-us/custom...ice/contact-us
Scan a pic of the cutter. Tell them what's wrong. I've had problems with cutters and they sent me replacements free of charge. In fact I've done it at least 3 times. Dropped a ruler and a corner was snapped off...replace FoC. Small rotating mat...ened up with grooves...replace FoC Takes a while but worth the wait.
https://www.fiskars.com/en-us/custom...ice/contact-us
Scan a pic of the cutter. Tell them what's wrong. I've had problems with cutters and they sent me replacements free of charge. In fact I've done it at least 3 times. Dropped a ruler and a corner was snapped off...replace FoC. Small rotating mat...ened up with grooves...replace FoC Takes a while but worth the wait.
#26
I have been using Olfa for a few years now, with easy change, retractable blade. My first was a Fiskar with a button that you pressed the blade open . Well went I would try to bare down to cut, the blade wouldn’t stay locked open and retract. I got tired of that and changed to Olfa. Maybe they will fix mine. It’s a 60mm and I now use an Olfa 45. I did like the big one for cutting fleece.
Thread
Thread Starter
Forum
Replies
Last Post