Needle-Turn aplique question
#11
Senior Member
Join Date: Sep 2011
Location: Western NY
Posts: 841
I use Milliner needles size 11 John James or Bohin. I only use silk thread. I also have a magnifying pair of glasses with a light on them which I use when doing applique. The glasses were only about $15.00 but are worth their weight in gold.
#12
Power Poster
Join Date: Dec 2010
Location: Northern California mountains
Posts: 12,538
I use John James embroidery needles because they are very sharp and smooth and I can thread them. I also use thread haven to treat my thread. BTW, in our local quilt show I have taken best hand needlework 2 years in a row.
#13
Power Poster
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
Roxanne applique needles and John James Milners are my favorites, size 10-11 usually. I also use silk thread for hand applique ( and most of my hand sewing)
See if I can explain this so it makes sense without pictures-- to keep your silk thread from sliding out of the eye of the needle while stitching-- thread needle, pull thread through about 2"-3", hold long end against back of needle, take end that you threaded through, and thread it back through creating a loop, tip the needle through the loop and pull the two thread ends tight. Both ends of the thread will be on the same side of the eye- locked in place, one a couple inches long the other as long as you cut your thread. The thread is ( locked) around the needle- will not slide out. ( when ready to change / rethread needle just slide your nail down the eye, shaft of needle to open the loop again) this works with any thread - I was taught to thread my needles like this year's ago by an elderly lady who hand quilted.
See if I can explain this so it makes sense without pictures-- to keep your silk thread from sliding out of the eye of the needle while stitching-- thread needle, pull thread through about 2"-3", hold long end against back of needle, take end that you threaded through, and thread it back through creating a loop, tip the needle through the loop and pull the two thread ends tight. Both ends of the thread will be on the same side of the eye- locked in place, one a couple inches long the other as long as you cut your thread. The thread is ( locked) around the needle- will not slide out. ( when ready to change / rethread needle just slide your nail down the eye, shaft of needle to open the loop again) this works with any thread - I was taught to thread my needles like this year's ago by an elderly lady who hand quilted.
#14
Super Member
Join Date: Apr 2010
Location: playing with fabric in Louisiana
Posts: 3,246
Roxanne applique needles and John James Milners are my favorites, size 10-11 usually. I also use silk thread for hand applique ( and most of my hand sewing)
See if I can explain this so it makes sense without pictures-- to keep your silk thread from sliding out of the eye of the needle while stitching-- thread needle, pull thread through about 2"-3", hold long end against back of needle, take end that you threaded through, and thread it back through creating a loop, tip the needle through the loop and pull the two thread ends tight. Both ends of the thread will be on the same side of the eye- locked in place, one a couple inches long the other as long as you cut your thread. The thread is ( locked) around the needle- will not slide out. ( when ready to change / rethread needle just slide your nail down the eye, shaft of needle to open the loop again) this works with any thread - I was taught to thread my needles like this year's ago by an elderly lady who hand quilted.
See if I can explain this so it makes sense without pictures-- to keep your silk thread from sliding out of the eye of the needle while stitching-- thread needle, pull thread through about 2"-3", hold long end against back of needle, take end that you threaded through, and thread it back through creating a loop, tip the needle through the loop and pull the two thread ends tight. Both ends of the thread will be on the same side of the eye- locked in place, one a couple inches long the other as long as you cut your thread. The thread is ( locked) around the needle- will not slide out. ( when ready to change / rethread needle just slide your nail down the eye, shaft of needle to open the loop again) this works with any thread - I was taught to thread my needles like this year's ago by an elderly lady who hand quilted.
#15
Super Member
Join Date: Dec 2010
Location: New York City/Manhattan
Posts: 1,316
this is exactly what I use. A friend turned me onto these needles about 15 years ago and I've stuck with them. As my eyes age, I find I need to use a needle threader with this needle unless I am in the bright sun.
#16
Super Member
Join Date: May 2013
Location: Ballwin, MO
Posts: 4,280
I secure my thread in the needle using a technique I found in an embroidery book. After threading the needle, you stick the needle through the short thread end, attempting to divide the thread evenly (you have to pull the thread tightly around your thumb to accomplish this), then pull it tight. This works well for applique, but when stitching down binding, I usually have to re-do each thread length a couple of times because the harder pulling I do when stitching binding causes it to come undone. ckcowl, I'll have to give your method a try.
#18
Super Member
Join Date: Mar 2010
Location: Ridgefield WA
Posts: 7,765
Roxanne applique needles and John James Milners are my favorites, size 10-11 usually. I also use silk thread for hand applique ( and most of my hand sewing)
See if I can explain this so it makes sense without pictures-- to keep your silk thread from sliding out of the eye of the needle while stitching-- thread needle, pull thread through about 2"-3", hold long end against back of needle, take end that you threaded through, and thread it back through creating a loop, tip the needle through the loop and pull the two thread ends tight. Both ends of the thread will be on the same side of the eye- locked in place, one a couple inches long the other as long as you cut your thread. The thread is ( locked) around the needle- will not slide out. ( when ready to change / rethread needle just slide your nail down the eye, shaft of needle to open the loop again) this works with any thread - I was taught to thread my needles like this year's ago by an elderly lady who hand quilted.
See if I can explain this so it makes sense without pictures-- to keep your silk thread from sliding out of the eye of the needle while stitching-- thread needle, pull thread through about 2"-3", hold long end against back of needle, take end that you threaded through, and thread it back through creating a loop, tip the needle through the loop and pull the two thread ends tight. Both ends of the thread will be on the same side of the eye- locked in place, one a couple inches long the other as long as you cut your thread. The thread is ( locked) around the needle- will not slide out. ( when ready to change / rethread needle just slide your nail down the eye, shaft of needle to open the loop again) this works with any thread - I was taught to thread my needles like this year's ago by an elderly lady who hand quilted.
#19
I am 'frugal' and when I decided I wanted to to Margaret Docherty's "Little Brown Bird" quilt, I had no applique supplies, but I do have an entire set of ThreaDelight polyester machine embroidery thread (260 cones). It's very sturdy and comes in nearly all the colors I need, so that's what I use, with hand-quilting needles (betweens); I have no problems with either. My stitches are tiny, uniform, and virtually invisible. I press my blocks (face down in on a terry towel ... not me, the blocks) and it's all good.
Thread
Thread Starter
Forum
Replies
Last Post
DollyMomma
Pictures
48
09-06-2012 05:14 PM