50 Fab Paper-Pieced Stars
#351
Here are some tips I have discovered. Maybe it will help others.
1. When you flip and press your pieces be sure you iron up tight against the seam so they will match connecting seams.
2. When connecting your A & B sections and squares use a scant 1/4 " seam. (ie. stitch a needle wide to the right hand side of the black line.)
3. DO NOT trim the outside edges of the completed block edges until you are finished. Then when you square up your block it will measure 12 1/2" .
1. When you flip and press your pieces be sure you iron up tight against the seam so they will match connecting seams.
2. When connecting your A & B sections and squares use a scant 1/4 " seam. (ie. stitch a needle wide to the right hand side of the black line.)
3. DO NOT trim the outside edges of the completed block edges until you are finished. Then when you square up your block it will measure 12 1/2" .
#355
Ok, only one more section to redo again. I thought I needed to redo 2 "B" sections. And nope I needed one of A and B. So back to the drawing table. I even know what I'm doing, but I'm dyslexic and that's my excuse! Honestly I am, and it did take me a while to get all this in my head. So if I can do it, anyone can.
#357
Here is my Alabama block. I have a huge lump in the middle where I forgot to open the seams and remove the paper before stitching so I'll be picking at that with my tweezers (joy!).
[ATTACH=CONFIG]301015[/ATTACH]
[ATTACH=CONFIG]301015[/ATTACH]
#359
Super Member
Join Date: Mar 2010
Location: north Alabama
Posts: 1,911
All the blocks are beautiful! Seems like everybody EXCEPT us 'Bama girls have done the Alabama block! I'm also wondering if using "used" fabric softener sheets will work, instead of paper for the piecing. I'll give it a try and let you know. That way it won't have to be removed. I also press the used dryer sheets before using them for foundation work, and that stiffens them enough to be usable without stretching, and I try to keep them as square as possible while pressing.
Thread
Thread Starter
Forum
Replies
Last Post