Go Back  Quiltingboard Forums >
  • Main
  • binding >
  • binding

  • binding

    Thread Tools
     
    Old 07-17-2013, 12:40 PM
      #1  
    Senior Member
    Thread Starter
     
    evelyn5269's Avatar
     
    Join Date: Aug 2011
    Location: Spokane Washington
    Posts: 309
    Default binding

    I could not find a category for sewing not necessarily for quilting but here goes. I have a terrible time with binding especially on potholders. Yes they are quilted so guess this qualifies here. I can sew the one side on perfectly but always miss a section on the back side so even on quilts I just bring the backing forward and miter the corners instead of a binding. I have watched videos that look so easy and come out so neat and then mine are awful. The potholders are beautiful til I bind them.

    Thanks for any help.
    Evelyn in Sequim
    evelyn5269 is offline  
    Old 07-17-2013, 12:46 PM
      #2  
    Super Member
     
    Annie68's Avatar
     
    Join Date: Jul 2011
    Location: Maine
    Posts: 1,469
    Default

    You could always sew the binding to the front and then turn to the back hand stitch with a blind stitch. You'll have a nice looking binding on quilts or pot holders.
    Annie68 is offline  
    Old 07-17-2013, 12:46 PM
      #3  
    Super Member
     
    Gramie bj's Avatar
     
    Join Date: Dec 2010
    Location: Riverside Washington
    Posts: 1,508
    Default

    I know what you mean, I sew binding to back, or front, then fold over and hand stich it down. No stich lines show on my bindings.
    Gramie bj is offline  
    Old 07-17-2013, 12:58 PM
      #4  
    Power Poster
     
    Join Date: Dec 2008
    Location: Western Wisconsin
    Posts: 12,930
    Default

    There are several things I do to help my machine bindings come out better.

    (1) After sewing the binding on, I iron the binding away from the sandwich body. This makes a cleaner turn-of-the-cloth.

    (2) I use Elmer's washable glue and turn the binding (and secure it) at the ironing board. The real trick is to accurately glue the binding edge to the sewn line.

    (3) Only then do I take the quilt to the machine to sew the binding on.

    The most forgiving stitch is the serpentine stitch (looks like a large S repeated over and over). It can be used with the left side of the S just meeting the edge of the binding, or I have also used it with the S centered over the binding edge with the stitching falling both on and off the binding. Both look good, but experiment with a sample to see which you might prefer.

    Any stitch that has a straight line in it is more difficult because you need to keep that stitch perfectly lined up with the already-sewn line. If you have ironed and glued well, and if you go slowly, it can be done. I have never had it perfect -- there are always some areas that are better and worse -- but for utility use no one else notices the imperfections. Usually I use a hem stitch for this.

    If you have a newer machine, you may have decorative stitch options other than the Serpentine that do not incorporate a straight line. These would be good to try out on samples. My machine is older and does not have a wide selection of decorative stitches, so I don't have any options like that.

    Edit: I do think oval or circular potholders must be very difficult. Square or rectangular pot holders would be more like quilts.
    Prism99 is offline  
    Old 07-17-2013, 01:50 PM
      #5  
    Super Member
     
    EasyPeezy's Avatar
     
    Join Date: Mar 2010
    Location: Canada
    Posts: 3,458
    Default

    I'd make the binding a bit wider as you are probably using more than one layer
    of batting, right? It also helps to sew the edges before applying the binding.
    Keeps everything flat.
    EasyPeezy is offline  
    Old 07-17-2013, 02:29 PM
      #6  
    Super Member
     
    Join Date: Jul 2007
    Location: central Indiana
    Posts: 1,166
    Default

    I used to have difficulty with bindings until I took a class at the LQS that taught us to use a tool put out by Missouri Quilt Co. We were told that there is a smaller tool to use like on potholders. I do find that I like to use a 2 1/2" strip folded in half. I stitch to the front and use a 3/8" seam allowance then fold to the back and hand stitch. One could machine stitch, as well, using a decorative stitch. The tool helps to eliminate the bulk when finishing. Good luck!
    Pam B is offline  
    Old 07-17-2013, 03:21 PM
      #7  
    Senior Member
     
    Join Date: Dec 2012
    Location: Haverhill, MA
    Posts: 498
    Default

    Originally Posted by Prism99
    There are several things I do to help my machine bindings come out better.

    (1) After sewing the binding on, I iron the binding away from the sandwich body. This makes a cleaner turn-of-the-cloth.

    (2) I use Elmer's washable glue and turn the binding (and secure it) at the ironing board. The real trick is to accurately glue the binding edge to the sewn line.

    (3) Only then do I take the quilt to the machine to sew the binding on.
    I do the same thing except I do not use elmers glue. I use my edge joining foot, place the edge of the binding on the right hand side of the blade, then move my needle over to the spot I want to do the stitching. For my machine the center is 3.5, I put it at about 5.0 or 5.5 when doing binding. Go slow, lengthen the stitch as well (default on my machine is 2.5, I set it for binding either 3.5 or 4.0)

    this helps me keep the binding straight (on the blade/guide) and stitch in the same spot along the binding. I dont worry too much what the back looks like, for me it doesnt have to be exactly in the ditch on the back, just close to it. I use a matching thread in bobbin to the backing so that stitch isnt noticed.
    CarolynMT is offline  
    Old 07-17-2013, 03:53 PM
      #8  
    Super Member
     
    Join Date: Mar 2010
    Location: Anchorage, AK
    Posts: 1,393
    Default

    I stitch my binding on the front then, like Prism99, press the binding away from the body. I then turn the binding to the back and pin...FROM THE FRONT...when I pin - I pin insert the tip of the pin straight down into the quilt and as close to the folded edge of the binding as I can then bring the tip back up to the top/front of the quilt with the head of the pin extending to the right and outside the quilt edge. This does to things - it shows me where the back edge is (at the insertion point of the pin) and it gives me a clear "path" in which to stitch - as long as my stitching is between the insertion point of the pin and the seam where the binding was stitched to the quilt, I know that I'll catch the back edge of the binding. When I first started doing this- I had to look at the back to make sure I was close to the folded edge, but now i can do it by feel.

    The other thing I do is to cut a slightly wider binding as EazyPeezy does - the rule I learned in an early class for cutting binding for hand finishing was to take your seam allowance (or finished bound edge size) times 7 to determine how wide to cut your binding strip for a folded binding. Since I want it slightly wider for machine finishing, I add one quarter inch to that number. In other words - I like to use a 3/8 seam for most bindings - 3/8 times 7 equals 21/8 or 2 5/8 inches to cut for hand stitching - add 1/4 inch for machine finishing means I cut the strip at 2 7/8 inches. If I want my binding to finish at 1/4 inch, it would be 1/4 times 7 = 7/4 = 1 3/4 inches + 1/4 = cutting width of 2 inches.
    ktbb is offline  
    Old 07-17-2013, 04:16 PM
      #9  
    Power Poster
     
    Join Date: Jun 2011
    Location: Southern California
    Posts: 19,127
    Default

    Originally Posted by Annie68
    You could always sew the binding to the front and then turn to the back hand stitch with a blind stitch. You'll have a nice looking binding on quilts or pot holders.

    Have always done my binding by hand stitching it to the back. I had many quilts in competition and that is the professional way to finish the binding. Try it. Before becoming disable, I use to be able to hand stitch 5 feet of binding in an hour. Great time to do it is while watching TV in the evening.
    ManiacQuilter2 is offline  
    Old 07-17-2013, 08:37 PM
      #10  
    Power Poster
     
    Join Date: Jan 2011
    Location: Upland CA
    Posts: 18,376
    Default

    Originally Posted by Annie68
    You could always sew the binding to the front and then turn to the back hand stitch with a blind stitch. You'll have a nice looking binding on quilts or pot holders.
    This is what I do also, works like a charm!
    mighty is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    craftybear
    Links and Resources
    0
    11-03-2011 01:23 PM
    hlponyfarm
    Main
    65
    06-24-2011 11:10 AM
    MaryAnna
    Tutorials
    30
    12-12-2010 08:06 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter