15 91 isn't picking up bobbin thread
07-19-2014, 03:30 AM
#31
Super Member
Join Date: Feb 2012
Posts: 8,091
Originally Posted by manicmike
No worries. I'd actually thought you'd assumed (as I did) that all 15s are the same. Every single one I've ever had has been left to right, but I've never had a 15-88 to -91. All other models are left-right like the 66 (and 99, 27, 28 etc etc) or front to back (206, 306, 319, 320, 400 series and more). It's one of those things we learn by experience but there's no easily found definitive list. Here's what I have so far: Singer models that thread R --> L: 15-88, 15-89, 15-90, 15-91, 201, 221, 222 My new (!) Improved Family or 15-1 is left to right.
07-19-2014, 07:33 PM
#34
Super Member
Thread Starter
Join Date: Aug 2013
Posts: 9,300
Thank you for all your advice. As soon as I'm feeling patient enough to sit and work with it again, I'll come back and
reread what you've each suggested. I will get the serial number. I have the original manual and have consulted ISMACS for close-up pics , which help these 40-something eyes a lot. Glad to know it's probably NOT a timing issue.
I appreciate everyone's input. I really do. Waiting for the "a-ha!" moment and will report my success when (not IF, I am DETERMINED!) it happens. I know it becomes a friendly competition among you mechanical types to see who was RIGHT about what is WRoNG with these ole machines. LOL
reread what you've each suggested. I will get the serial number. I have the original manual and have consulted ISMACS for close-up pics , which help these 40-something eyes a lot. Glad to know it's probably NOT a timing issue.
I appreciate everyone's input. I really do. Waiting for the "a-ha!" moment and will report my success when (not IF, I am DETERMINED!) it happens. I know it becomes a friendly competition among you mechanical types to see who was RIGHT about what is WRoNG with these ole machines. LOL
07-19-2014, 09:06 PM
#35
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
Originally Posted by zozee
...I know it becomes a friendly competition among you mechanical types to see who was RIGHT about what is WRoNG with these ole machines. LOL
LOL, I think of it more like we are on the same team playing soccer and trying to drive it to the goal!
07-20-2014, 01:12 AM
#37
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
I think people try to offer suggestions that nobody else offered just to cover all the bases. It is not a competition to see who is right. Take a few deep breaths - look at your manual and see what you see. Start with checking your needle for being in correctly. Then re-thread the machine following the directions perfectly. Clean out the bobbin area - while you are in there, pull out the hook and check it for burrs and make sure it isn't broken - then see if it lines up behind the needle. Then take the bobbin case tension spring apart and clean the lint out of it and re-assemble. There can also be dried up oil on a thread guide or in the tension. Check the tension adjustment - is it is too tight or too loose. If you see excess lint or dried up oil in the tension you can clean and rebuild it. It isn't rocket science but some times when the machine is acting up it sure feels like it. Also you don't lose if you have to take it somewhere and get help. You still win if they can fix the machine. It is a matter of what you feel comfortable doing.
Thread
Thread Starter
Forum
Replies
Last Post
bennie0755
For Vintage & Antique Machine Enthusiasts
6
01-13-2016 01:03 PM
